Convert Giex GX02 quirk to V2

[prairiesnpr]

Proposed change

Convert GX02 Quirk to a V2 Quirk. Add additional functionality.

Additional information

1. Requires: Support Timestamp class Sensor zha#222
   or Add Timestamp Sensor zha#224
2. Device reports temperature, but it's always 0, so I'm not adding an entity.
3. The device supports an onboard schedule, details below in case someone wants to implement it. I don't see a clean way to implement it, nor do I think it would be very useful, so I skipped it.

Setting on board schedule.

### 14 Byte Data Packet ###
[0-1] Message id, increments by 1 
[2] DP Id (0x71)
[3] DP Type (Raw [0x00])
[4-5] Never changed, always 0x0008
[6] Action 0x10: Duration based, 0x11: Volume Based, 0x01: Delete Schedule
[7] Schedule id, 0 indexed
[8] Days of week schedule is active, bitfield [NA, SUN, MON, TUE, WED, THU, FRI, SAT]
[9] Start time HH, max 23
[10] Start time MM, max 59
[11-13] Set point in time(seconds) or volume, max 86,399 seconds or 6500L

Closes: #3052, Closes: #3209

Checklist

• The changes are tested and work correctly
• pre-commit checks pass / the code has been formatted using Black
• Tests have been added to verify that the new code works

[codecov]

Codecov Report

All modified and coverable lines are covered by tests ✅

Project coverage is 89.37%. Comparing base (9923e5e) to head (d28301d).
Report is 3 commits behind head on dev.

Additional details and impacted files

@@            Coverage Diff             @@
##              dev    #3394      +/-   ##
==========================================
+ Coverage   89.35%   89.37%   +0.02%     
==========================================
  Files         308      308              
  Lines        9978     9990      +12     
==========================================
+ Hits         8916     8929      +13     
+ Misses       1062     1061       -1     

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

[TheJulianJES]

After pairing, ZHA must be reloaded for the Summation delivered sensor to show.

That might have been fixed by the PR below. Would be great to get confirmation on that (or that it didn't break anything 😄):

• Add _VALID_ATTRIBUTES to LocalDataCluster, fix Tuya datapoint mappings on LocalDataClusters #3415

[prairiesnpr]

After pairing, ZHA must be reloaded for the Summation delivered sensor to show.

That might have been fixed by the PR below. Would be great to get confirmation on that (or that it didn't break anything 😄):

• Add _VALID_ATTRIBUTES to LocalDataCluster, fix Tuya datapoint mappings on LocalDataClusters #3415

Can confirm, it was created on joining.

[TheJulianJES]

Otherwise good

[TheJulianJES]

Looks good