Dell z9264f bringup

[dgsudharsan]

- What I did
Bring up Sonic on Z9264 A01 Board

- How I did it
The existing code base supports Z9264f X00 variant. The changes have been done based on differences in the hardware between X00 and A01 variants

- How to verify it

By checking the output of various show commands

- Description for the changelog

The changes comprise of platform files for Z9264f A01 board bring up. The changes include

1. New fpga ocores driver for A01 variant.
2. Modifying the i2c tree based on the changes in A01 hardware
3. Sfp transceiver change event support
4. Platform reboot plugin

- A picture of a cute animal (not mandatory but encouraged)

[dgsudharsan]

Mt Darwin(Z9264) A01 (X01) bring up

Show platform syseeprom:

root@sonic:~# show platform syseeprom
TlvInfo Header:
Id String: TlvInfo
Version: 1
Total Length: 181
TLV Name Code Len Value

---

Product Name 0x21 9 Z9264F-ON
Part Number 0x22 6 0WCXFV
Serial Number 0x23 20 CN0WCXFVDND0088M0002
Base MAC Address 0x24 6 20:04:0F:06:BA:33
Manufacture Date 0x25 19 08/22/2018 20:15:27
Device Version 0x26 1 1
Label Revision 0x27 3 A01
Platform Name 0x28 30 x86_64-dellemc_z9264f_c3538-r0
ONIE Version 0x29 10 3.42.1.9-3
MAC Addresses 0x2A 2 640
Manufacturer 0x2B 5 DND00
Manufacture Country 0x2C 2 CN
Vendor Name 0x2D 8 Dell EMC
Diag Version 0x2E 11 3.00.3.41-1
Service Tag 0x2F 7 6G0NXC2
Vendor Extension 0xFD 4
CRC-32 0xFE 4 0xEF38E342
(checksum valid)

show platform psustatus:

root@sonic:~# show platform psustatus
PSU Status

---

PSU 1 OK
PSU 2 OK
root@sonic:~#

Show platform summary:

root@sonic:# show platform summary
Platform: x86_64-dellemc_z9264f_c3538-r0
HwSKU: DellEMC-Z9264f
ASIC: broadcom
root@sonic:#

Show environment:

acpitz-virtual-0
Adapter: Virtual device
temp1: +0.0 C (crit = +94.0 C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +39.0 C (high = +74.0 C, crit = +94.0 C)
Core 2: +36.0 C (high = +74.0 C, crit = +94.0 C)
Core 6: +35.0 C (high = +74.0 C, crit = +94.0 C)
Core 8: +34.0 C (high = +74.0 C, crit = +94.0 C)
Core 12: +37.0 C (high = +74.0 C, crit = +94.0 C)

Onboard Temperature Sensors:
PT_Left_temp: 29 degrees C
PT_Mid_temp: 40 degrees C
PT_Right_temp: 32 degrees C
Broadcom Temp: 37 degrees C
Inlet Airflow Temp: 35 degrees C
CPU Temp: 36 degrees C
CPU Near Temp: 39 degrees C
DRAM Temp: 36 degrees C
Fan Trays:
Fan Tray 1:
Fan1 Speed: 10440 RPM
Fan2 Speed: 10440 RPM
Fan1 State: Normal
Fan2 State: Normal
Fan Tray 2:
Fan1 Speed: 10440 RPM
Fan2 Speed: 10350 RPM
Fan1 State: Normal
Fan2 State: Normal
Fan Tray 3:
Fan1 Speed: 10440 RPM
Fan2 Speed: 10440 RPM
Fan1 State: Normal
Fan2 State: Normal
Fan Tray 4:
Fan1 Speed: 10440 RPM
Fan2 Speed: 10440 RPM
Fan1 State: Normal
Fan2 State: Normal
PSUs:
PSU1:
FAN Normal Temperature: 36 degrees C
FAN System Temperature: 30 degrees C
FAN Chassis Temperature: 38 degrees C
FAN AirFlow Temperature: 34 degrees C
FAN RPM: 17850 RPM
Input Voltage: 53 Volts
Output Voltage: 12 Volts
Input Power: 188 Watts
Output Power: 136 Watts
Input Current: 0.96 Amps
Output Current: 11 Amps
PSU2:
FAN Normal Temperature: 36 degrees C
FAN System Temperature: 30 degrees C
FAN Chassis Temperature: 38 degrees C
FAN AirFlow Temperature: 34 degrees C
FAN RPM: 17850 RPM
Input Voltage: 47 Volts
Output Voltage: 12 Volts
Input Power: 220 Watts
Output Power: 187 Watts
Input Current: 2.11 Amps
Output Current: 15.50 Amps

Total Power:                        408 Watts

Show interfaces transceiver presence:

root@sonic:~# show interfaces transceiver presence Ethernet4
Port Presence

---

Ethernet4 Present
root@sonic:~# show interfaces transceiver presence Ethernet8
Port Presence

---

Ethernet8 Not present
root@sonic:~# show interfaces transceiver presence Ethernet12
Port Presence

---

Ethernet12 Present
root@sonic:~#

Show interfaces transceiver eeprom:

root@sonic:~# show interfaces transceiver eeprom Ethernet4
Ethernet4: SFP EEPROM detected
Connector: No separable connector
Encoding: Unspecified
Extended Identifier: Power Class 1(1.5W max)
Extended RateSelect Compliance: QSFP+ Rate Select Version 1
Identifier: QSFP+
Length Cable Assembly(m): 3
Nominal Bit Rate(100Mbs): 103
Specification compliance:
10/40G Ethernet Compliance Code: 40GBASE-CR4
Fibre Channel Speed: 1200 Mbytes/Sec
Fibre Channel link length/Transmitter Technology: Electrical inter-enclosure (EL)
Fibre Channel transmission media: Twin Axial Pair (TW)
Vendor Date Code(YYYY-MM-DD Lot): 2013-05-23
Vendor Name: Amphenol
Vendor OUI: 78-a7-14
Vendor PN: 616750003
Vendor Rev: B
Vendor SN: CN0FC6KV35D6898

root@sonic:~# show interfaces transceiver eeprom Ethernet12
Ethernet12: SFP EEPROM detected
Connector: No separable connector
Encoding: Unspecified
Extended Identifier: Power Class 1(1.5W max)
Extended RateSelect Compliance: QSFP+ Rate Select Version 1
Identifier: QSFP+
Length Cable Assembly(m): 3
Nominal Bit Rate(100Mbs): 103
Specification compliance:
10/40G Ethernet Compliance Code: 40GBASE-CR4
Fibre Channel Speed: 1200 Mbytes/Sec
Fibre Channel link length/Transmitter Technology: Electrical inter-enclosure (EL)
Fibre Channel transmission media: Twin Axial Pair (TW)
Vendor Date Code(YYYY-MM-DD Lot): 2013-05-23
Vendor Name: Amphenol
Vendor OUI: 78-a7-14
Vendor PN: 616750003
Vendor Rev: B
Vendor SN: CN0FC6KV35D6898
Show interfaces status:

root@sonic:~# show interfaces status
Interface Lanes Speed MTU Alias Oper Admin

---

Ethernet0 49,50,51,52 N/A 9100 hundredGigE1/1 down up
Ethernet4 53,54,55,56 N/A 9100 hundredGigE1/2 up up
Ethernet8 65,66,67,68 N/A 9100 hundredGigE1/3 down up
Ethernet12 69,70,71,72 N/A 9100 hundredGigE1/4 up up

Module information:

root@sonic:# lsmod | grep fpga
dell_z9264f_fpga_ocores 36864 0
root@sonic:# modinfo dell_z9264f_fpga_ocores
filename: /lib/modules/4.9.0-7-amd64/extra/dell_z9264f_fpga_ocores.ko
description: Driver for FPGA Opencores I2C bus
author: [email protected]
license: GPL
alias: pci:v000010EEd00007021svsdbcsci*
depends:
retpoline: Y
vermagic: 4.9.0-7-amd64 SMP mod_unload modversions
parm: use_irq:Get an use_irq value from user...
(int)

I2C MUX initialization:

root@sonic:# cat /sys/class/i2c-adapter/i2c-2/name
i2c-603-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-10/name
i2c-604-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-18/name
i2c-605-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-26/name
i2c-606-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-34/name
i2c-607-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-38/name
i2c-607-mux (chan_id 4)
root@sonic:# cat /sys/class/i2c-adapter/i2c-42/name
i2c-608-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-50/name
i2c-609-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-58/name
i2c-610-mux (chan_id 0)
root@sonic:# cat /sys/class/i2c-adapter/i2c-66/name
i2c-611-mux (chan_id 0)
root@sonic:~#

[lguohan]

ipmitool is installed the pmon container, can you use that?

[dgsudharsan]

Done.

[lguohan]