Remove deprecated fields from CompilationConfig

.buildkite/test-pipeline.yaml

@@ -430,6 +430,7 @@ steps:
     - vllm/
     - tests/compile
   commands:
+    - pytest -v -s compile/test_config.py
     - pytest -v -s compile/test_pass_manager.py
     - pytest -v -s compile/test_fusion.py
     - pytest -v -s compile/test_fusion_attn.py

docs/design/cuda_graphs.md

@@ -218,16 +218,6 @@ outputs = model.generate(
 )
 ```
 
-### Migration from legacy flags
-
-Legacy `use_cudagraph` and `full_cuda_graph` are unified by `cudagraph_mode`:
-
-* `use_cudagraph=False` → `NONE`.
-* `use_cudagraph=True` and `full_cuda_graph=False` → `PIECEWISE`.
-* `full_cuda_graph=True` → directly set `FULL` and rely on the graceful fallback policy.
-
-As they are deprecated and will be removed in the next major or minor release, i.e., v0.11.0 or v1.0.0, we recommend using cudagraph_mode instead.
-
 ### Piecewise compilation and full graph custom passes (attention fusion, sequence parallelism)
 
 Unfortunately, some custom compile passes have to see the whole graph to be effective and hence aren't compatible with piecewise compilation. This includes `AttnFusionPass` and `SequenceParallelismPass`. As a short-term solution, we automatically disable piecewise compilation (by setting `splitting_ops=[]`) when attention fusion is enabled. We use CUDA Graph modes `FULL` or `FULL_DECODE_ONLY` (depending on backend support). However, this leads to another optimization incompatibility and confusing performance tradeoffs.

tests/compile/piecewise/test_multiple_graphs.py

@@ -203,7 +203,7 @@ def test_multi_graph_piecewise_compile(use_inductor_graph_partition: bool):
     vllm_config = VllmConfig(
         compilation_config=CompilationConfig(
             mode=CompilationMode.VLLM_COMPILE,
-            use_cudagraph=True,
+            cudagraph_mode=CUDAGraphMode.PIECEWISE,
             splitting_ops=["silly::attention"],
             cudagraph_capture_sizes=[1, 2],
             use_inductor_graph_partition=use_inductor_graph_partition,
@@ -281,7 +281,7 @@ def test_multi_graph_piecewise_compile(use_inductor_graph_partition: bool):
     vllm_config = VllmConfig(
         compilation_config=CompilationConfig(
             mode=CompilationMode.VLLM_COMPILE,
-            use_cudagraph=False,
+            cudagraph_mode=CUDAGraphMode.NONE,
             splitting_ops=["silly::attention"],
             use_inductor_graph_partition=use_inductor_graph_partition,
         )

tests/compile/piecewise/test_simple.py

@@ -62,7 +62,6 @@ def _run_simple_model(
     vllm_config = VllmConfig(
         compilation_config=CompilationConfig(
             mode=CompilationMode.VLLM_COMPILE,
-            use_cudagraph=True,
             use_inductor=use_inductor,
             splitting_ops=splitting_ops,
             use_inductor_graph_partition=use_inductor_graph_partition,

tests/compile/piecewise/test_toy_llama.py

@@ -449,7 +449,6 @@ def benchmark():
         if piecewise:
             compilation_config = CompilationConfig(
                 mode=CompilationMode.VLLM_COMPILE,
-                use_cudagraph=True,
                 splitting_ops=["silly::attention"],
                 cudagraph_capture_sizes=cudagraph_sizes,
             )

tests/compile/test_config.py

@@ -4,14 +4,15 @@
 from contextlib import nullcontext
 
 import pytest
+from pydantic import ValidationError
 
 from vllm.compilation.counter import compilation_counter
 from vllm.compilation.fix_functionalization import FixFunctionalizationPass
 from vllm.config import CompilationConfig, CUDAGraphMode, VllmConfig
 from vllm.config.compilation import CompilationMode
 from vllm.engine.arg_utils import EngineArgs
 from vllm.platforms import current_platform
-from vllm.utils.torch_utils import _is_torch_equal_or_newer, is_torch_equal_or_newer
+from vllm.utils.torch_utils import _is_torch_equal_or_newer
 
 
 def test_version():
@@ -23,14 +24,6 @@ def test_version():
     assert not _is_torch_equal_or_newer("2.7.1", "2.8.0.dev")
 
 
-def test_use_cudagraphs_dynamic():
-    vllm_config = VllmConfig()
-    # Default V1 configuration now starts without cudagraphs enabled; the
-    # engine decides when to capture based on runtime settings instead of a
-    # blanket default.
-    assert vllm_config.compilation_config.use_cudagraph
-
-
 def test_copy_pass():
     vllm_config = VllmConfig()
     inductor_pass = FixFunctionalizationPass(vllm_config)
@@ -65,7 +58,7 @@ def test_VLLM_DISABLE_COMPILE_CACHE(vllm_runner, monkeypatch, val):
     monkeypatch.setenv("VLLM_DISABLE_COMPILE_CACHE", val)
 
     compilation_config = {
-        "use_cudagraph": False,  # speed things up a bit
+        "cudagraph_mode": CUDAGraphMode.NONE,  # speed things up a bit
     }
     with (
         compilation_counter.expect(
@@ -83,20 +76,24 @@ def test_VLLM_DISABLE_COMPILE_CACHE(vllm_runner, monkeypatch, val):
 
 # forked needed to workaround https://github.com/vllm-project/vllm/issues/21073
 @pytest.mark.forked
-@pytest.mark.parametrize("enabled", [True, False])
-def test_use_cudagraphs(vllm_runner, monkeypatch, enabled):
+@pytest.mark.parametrize(
+    "cudagraph_mode", [CUDAGraphMode.FULL_AND_PIECEWISE, CUDAGraphMode.NONE]
+)
+def test_use_cudagraphs(vllm_runner, monkeypatch, cudagraph_mode):
     # Disable multiprocessing so that the counter is in the same process
     monkeypatch.setenv("VLLM_ENABLE_V1_MULTIPROCESSING", "0")
 
     compilation_config = {
         "cudagraph_capture_sizes": [100],
-        "use_cudagraph": enabled,
+        "cudagraph_mode": cudagraph_mode,
     }
+    num_gpu_runner_capture_triggers = 1 if cudagraph_mode != CUDAGraphMode.NONE else 0
+    num_cudagraph_captured = 14 if cudagraph_mode != CUDAGraphMode.NONE else 0
     with (
         compilation_counter.expect(
             num_graphs_seen=1,
-            num_gpu_runner_capture_triggers=1 if enabled else 0,
-            num_cudagraph_captured=13 if enabled else 0,
+            num_gpu_runner_capture_triggers=num_gpu_runner_capture_triggers,
+            num_cudagraph_captured=num_cudagraph_captured,
         ),
         # loading the model causes compilation (if enabled) to happen
         vllm_runner(
@@ -168,19 +165,18 @@ def test_splitting_ops_dynamic():
     assert not config.compilation_config.splitting_ops_contain_attention()
 
     # When use_inductor_graph_partition=True
-    if is_torch_equal_or_newer("2.9.0.dev"):
-        config = VllmConfig(
-            compilation_config=CompilationConfig(
-                mode=CompilationMode.VLLM_COMPILE,
-                use_inductor_graph_partition=True,
-                splitting_ops=["vllm::unified_attention"],
-            )
+    config = VllmConfig(
+        compilation_config=CompilationConfig(
+            mode=CompilationMode.VLLM_COMPILE,
+            use_inductor_graph_partition=True,
+            splitting_ops=["vllm::unified_attention"],
         )
-        # with inductor partition we use splitting_ops directly for
-        # partition rules
-        assert config.compilation_config.splitting_ops == ["vllm::unified_attention"]
+    )
+    # with inductor partition we use splitting_ops directly for
+    # partition rules
+    assert config.compilation_config.splitting_ops == ["vllm::unified_attention"]
 
-    # When attn_fusion pass enabled, splitting_ops now default to attention ops.
+    # When attn_fusion pass enabled.
     config = VllmConfig(
         compilation_config=CompilationConfig(
             mode=CompilationMode.VLLM_COMPILE,
@@ -189,29 +185,27 @@ def test_splitting_ops_dynamic():
             cudagraph_mode=CUDAGraphMode.PIECEWISE,
         )
     )
-    # With the new simplified logic, attention fusion works with splitting_ops
-    assert config.compilation_config.splitting_ops_contain_attention()
-    # cudagraph mode remains PIECEWISE
-    assert config.compilation_config.cudagraph_mode == CUDAGraphMode.PIECEWISE
+    assert config.compilation_config.splitting_ops == []
+    # cudagraph mode also fall back to FULL
+    assert config.compilation_config.cudagraph_mode == CUDAGraphMode.FULL
 
     # When both use_inductor_graph_partition and attn_fusion pass enabled.
-    if is_torch_equal_or_newer("2.9.0.dev"):
-        config = VllmConfig(
-            compilation_config=CompilationConfig(
-                mode=CompilationMode.VLLM_COMPILE,
-                use_inductor_graph_partition=True,
-                pass_config={"enable_attn_fusion": True, "enable_noop": True},
-                custom_ops=["+quant_fp8"],
-                cudagraph_mode=CUDAGraphMode.PIECEWISE,
-            )
+    config = VllmConfig(
+        compilation_config=CompilationConfig(
+            mode=CompilationMode.VLLM_COMPILE,
+            use_inductor_graph_partition=True,
+            pass_config={"enable_attn_fusion": True, "enable_noop": True},
+            custom_ops=["+quant_fp8"],
+            cudagraph_mode=CUDAGraphMode.PIECEWISE,
         )
-        # With inductor graph partition, attn_fusion and splitting_ops
-        # work together. Default splitting_ops include attention ops.
-        assert config.compilation_config.splitting_ops_contain_attention()
-        # enable_attn_fusion is directly supported under
-        # use_inductor_graph_partition=True, and cudagraph_mode
-        # is unchanged.
-        assert config.compilation_config.cudagraph_mode == CUDAGraphMode.PIECEWISE
+    )
+    # With inductor graph partition, attn_fusion and splitting_ops
+    # work together. Default splitting_ops include attention ops.
+    assert config.compilation_config.splitting_ops_contain_attention()
+    # enable_attn_fusion is directly supported under
+    # use_inductor_graph_partition=True, and cudagraph_mode
+    # is unchanged.
+    assert config.compilation_config.cudagraph_mode == CUDAGraphMode.PIECEWISE
 
 
 def test_resolve_operator_overload():
@@ -249,25 +243,36 @@ def test_resolve_operator_overload():
         "tp_size",
         "enable_sequence_parallelism",
         "max_num_batched_tokens",
-        "use_cudagraph",
+        "cudagraph_mode",
         "expected_max_size",
     ),
     [
-        (None, None, 1, False, 2048, True, 512),
-        ([1, 2, 4], 4, 1, False, 2048, True, 4),
-        ([1, 2, 4], 8, 1, False, 2048, True, RuntimeError),
-        ([1, 256], None, 1, False, 2048, 256),
-        ([], None, 1, False, 2048, False, 0),
-        (None, 0, 1, False, 2048, False, 0),
+        (None, None, 1, False, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, 256),
+        ([1, 2, 4], 4, 1, False, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, 4),
+        (
+            [1, 2, 4],
+            8,
+            1,
+            False,
+            2048,
+            CUDAGraphMode.FULL_AND_PIECEWISE,
+            ValidationError,
+        ),
+        ([1, 256], None, 1, False, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, 256),
+        ([], None, 1, False, 2048, CUDAGraphMode.NONE, 0),
+        (None, 0, 1, False, 2048, CUDAGraphMode.NONE, 0),
         # truncated to nearest multiple of 8 or 16
-        (None, 257, 1, False, 2048, True, 256),
-        ([1, 2, 4, 15], None, 1, False, 2048, True, 15),  # max from list
-        ([1, 2, 4, 15], None, 2, True, 2048, True, 4),  # filtered out 15 due to SP
-        ([1, 2, 4, 15], None, 1, False, 8, True, 4),  # limited by the max_tokens
+        (None, 257, 1, False, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, 256),
+        # max from list
+        ([1, 2, 4, 15], None, 1, False, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, 15),
+        # filtered out 15 due to SP
+        ([1, 2, 4, 15], None, 2, True, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, 4),
+        # limited by the max_tokens
+        ([1, 2, 4, 15], None, 1, False, 8, CUDAGraphMode.FULL_AND_PIECEWISE, 4),
         # the list should contain at least 1 element when use cudagraph
-        ([], None, 1, False, 2048, True, RuntimeError),
+        ([], None, 1, False, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, ValidationError),
         # the max capturing size should be >= 1 when use cudagraph
-        (None, 0, 1, False, 2048, True, RuntimeError),
+        (None, 0, 1, False, 2048, CUDAGraphMode.FULL_AND_PIECEWISE, ValidationError),
     ],
 )
 def test_cudagraph_sizes_post_init(
@@ -276,14 +281,13 @@ def test_cudagraph_sizes_post_init(
     tp_size,
     enable_sequence_parallelism,
     max_num_batched_tokens,
-    use_cudagraph,
+    cudagraph_mode,
     expected_max_size,
 ):
     ctx = nullcontext()
-    if isinstance(expected_max_size, Exception):
+    if expected_max_size == ValidationError:
         ctx = pytest.raises(expected_max_size)
 
-    cudagraph_mode = CUDAGraphMode.PIECEWISE if use_cudagraph else CUDAGraphMode.NONE
     with ctx:
         compilation_config = CompilationConfig(
             cudagraph_capture_sizes=cudagraph_capture_sizes,
@@ -298,11 +302,13 @@ def test_cudagraph_sizes_post_init(
         engine_args = EngineArgs(
             model="facebook/opt-125m",
             tensor_parallel_size=tp_size,
+            max_num_seqs=min(max_num_batched_tokens, 128),
             max_num_batched_tokens=max_num_batched_tokens,
             compilation_config=compilation_config,
         )
         vllm_config = engine_args.create_engine_config()
 
-    assert (
-        vllm_config.compilation_config.max_cudagraph_capture_size == expected_max_size
-    )
+        assert (
+            vllm_config.compilation_config.max_cudagraph_capture_size
+            == expected_max_size
+        )

tests/compile/test_decorator.py

@@ -80,7 +80,6 @@ def test_ignore_torch_compile_decorator(use_inductor_graph_partition, monkeypatc
     vllm_config = VllmConfig(
         compilation_config=CompilationConfig(
             mode=CompilationMode.VLLM_COMPILE,
-            use_cudagraph=True,
             splitting_ops=["silly::attention"],
             cudagraph_capture_sizes=[1, 2],
             use_inductor_graph_partition=use_inductor_graph_partition,
@@ -215,7 +214,6 @@ def test_conditional_compile_enable_if(use_inductor_graph_partition, monkeypatch
         ),
         compilation_config=CompilationConfig(
             mode=CompilationMode.VLLM_COMPILE,
-            use_cudagraph=True,
             splitting_ops=["silly::attention"],
             cudagraph_capture_sizes=[1, 2],
             use_inductor_graph_partition=use_inductor_graph_partition,
@@ -257,7 +255,6 @@ def test_conditional_compile_enable_if(use_inductor_graph_partition, monkeypatch
         ),
         compilation_config=CompilationConfig(
             mode=CompilationMode.VLLM_COMPILE,
-            use_cudagraph=True,
             splitting_ops=["silly::attention"],
             cudagraph_capture_sizes=[1, 2],
             use_inductor_graph_partition=use_inductor_graph_partition,

tests/models/multimodal/generation/test_qwen2_5_vl.py

@@ -60,11 +60,8 @@ def test_qwen2_5_vl_evs_functionality(
     with vllm_runner(
         model,
         runner="generate",
-        max_model_len=4000,
-        max_num_seqs=1,
         dtype=dtype,
         limit_mm_per_prompt={"video": 1},
-        tensor_parallel_size=1,
         video_pruning_rate=video_pruning_rate,
     ) as vllm_model:
         # Generate output - this should not crash