[voq][chassis] Remove created ports from the default vlan.#2607
[voq][chassis] Remove created ports from the default vlan.#2607arlakshm merged 2 commits intosonic-net:masterfrom
Conversation
Added a test case in test_virtual_chassis.py Signed-off-by: Nathan Wolfe <[email protected]>
|
|
|
/Azp run Azure.sonic-swss |
|
Azure Pipelines successfully started running 1 pipeline(s). |
|
/Azp run Azure.sonic-swss |
|
Azure Pipelines successfully started running 1 pipeline(s). |
|
/Azp run Azure.sonic-swss |
|
/azpw run Azure.sonic-swss |
|
/AzurePipelines run Azure.sonic-swss |
|
Azure Pipelines successfully started running 1 pipeline(s). |
|
/Azp run Azure.sonic-swss |
|
Azure Pipelines successfully started running 1 pipeline(s). |
|
Latest sonic-swss failures were on unit tests I didn't change: @arlakshm should we rekick sonic-swss again? |
|
/Azp run Azure.sonic-swss |
|
Azure Pipelines successfully started running 1 pipeline(s). |
|
Failures again were unrelated to my changes: test_mux.py::TestMuxTunnel::test_NH FAILED [ 18%] Rescheduling sonic-swss |
|
/azpw run Azure.sonic-swss |
|
/AzurePipelines run Azure.sonic-swss |
|
Azure Pipelines successfully started running 1 pipeline(s). |
|
@Ndancejic , can you please take a look at this failures when possible. |
|
the mux failures are a timing issue, the check fails because the sai doesn't have time to complete the update before the test checks the nh id. Because of this, the cleanup of that test doesn't happen and leaves some unexpected neighbors left over which causes the subsequent failures. I can see that the sairedis records show the correct Nexthop id. I can add a sleep to prevent this from happening in the future |
|
/Azp run Azure.sonic-swss |
|
Created #2664 for 202211 branch |
Signed-off-by: Nazarii Hnydyn <[email protected]>
*Merge remote-tracking branch 'upstream/master' into dash (#2663) * Modify coppmgr mergeConfig to support preserving copp tables through reboot. (#2548) * Avoid aborting orchagent when setting TUNNEL attributes (#2591) * Handle Mac address 'none' (#2593) * Increase diff coverage to 80% (#2599) * Add missing parameter to on_switch_shutdown_request method. (#2567) * Add ZMQ based ProducerStateTable and CustomerStateTable. * Revert "[voq][chassis]Add show fabric counters port/queue commands (#2522)" (#2611) * Added new attributes for Vnet and Vxlan ecmp configurations. (#2584) * added support for monitoring, primary and adv_prefix and overlay_dmac. * [routesync] Fix for stale dynamic neighbor (#2553) * [MuxOrch] Enabling neighbor when adding in active state (#2601) * Changed the BFD default detect multiplier to 10x (#2614) * Remove TODO comments that are no longer relevant (#2622) * Fix issue #13341 ARP entry can be out of sync between kernel and APPL_DB if multiple updates are received from RTNL (#2619) * [refactor]Refactoring sai handle status (#2621) * Vxlan tunnel endpoint custom monitoring APPL DB table. (#2589) * added support for monitoring, primary and adv_prefix. changed filter_mac to overlay_dmac * Data Structures and code to write APP_DB VNET_MONITOR table entries for custom monitoring of Vxlan tunnel endpoints. * [bfdorch] add local discriminator to state DB (#2629) * [acl] Add new ACL key BTH_OPCODE and AETH_SYNDROME (#2617) * [voq][chassis] Remove created ports from the default vlan. (#2607) * [EVPN]Handling race condition when remote VNI arrives before tunnel map entry (#2642) *Added check in remote VNI add to ensure vxlan tunnel map is created before adding the remote end point. * [test_mux] add sleep in test_NH (#2648) * [autoneg]Fixing adv interface types to be set when AN is disabled (#2638) * [hash]: Add UT infra. (#2660) *Added UT infra for Generic Hash feature *Aligned PBH tests with Generic Hash UT infra * [sai_failure_dump]Invoking dump during SAI failure (#2644) * [ResponsePublisher] add pipeline support (#2511) * [dash] Fix compilation issue caused by missing include.
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
Signed-off-by: Nazarii Hnydyn <[email protected]>
) *Merge remote-tracking branch 'upstream/master' into dash (sonic-net#2663) * Modify coppmgr mergeConfig to support preserving copp tables through reboot. (sonic-net#2548) * Avoid aborting orchagent when setting TUNNEL attributes (sonic-net#2591) * Handle Mac address 'none' (sonic-net#2593) * Increase diff coverage to 80% (sonic-net#2599) * Add missing parameter to on_switch_shutdown_request method. (sonic-net#2567) * Add ZMQ based ProducerStateTable and CustomerStateTable. * Revert "[voq][chassis]Add show fabric counters port/queue commands (sonic-net#2522)" (sonic-net#2611) * Added new attributes for Vnet and Vxlan ecmp configurations. (sonic-net#2584) * added support for monitoring, primary and adv_prefix and overlay_dmac. * [routesync] Fix for stale dynamic neighbor (sonic-net#2553) * [MuxOrch] Enabling neighbor when adding in active state (sonic-net#2601) * Changed the BFD default detect multiplier to 10x (sonic-net#2614) * Remove TODO comments that are no longer relevant (sonic-net#2622) * Fix issue #13341 ARP entry can be out of sync between kernel and APPL_DB if multiple updates are received from RTNL (sonic-net#2619) * [refactor]Refactoring sai handle status (sonic-net#2621) * Vxlan tunnel endpoint custom monitoring APPL DB table. (sonic-net#2589) * added support for monitoring, primary and adv_prefix. changed filter_mac to overlay_dmac * Data Structures and code to write APP_DB VNET_MONITOR table entries for custom monitoring of Vxlan tunnel endpoints. * [bfdorch] add local discriminator to state DB (sonic-net#2629) * [acl] Add new ACL key BTH_OPCODE and AETH_SYNDROME (sonic-net#2617) * [voq][chassis] Remove created ports from the default vlan. (sonic-net#2607) * [EVPN]Handling race condition when remote VNI arrives before tunnel map entry (sonic-net#2642) *Added check in remote VNI add to ensure vxlan tunnel map is created before adding the remote end point. * [test_mux] add sleep in test_NH (sonic-net#2648) * [autoneg]Fixing adv interface types to be set when AN is disabled (sonic-net#2638) * [hash]: Add UT infra. (sonic-net#2660) *Added UT infra for Generic Hash feature *Aligned PBH tests with Generic Hash UT infra * [sai_failure_dump]Invoking dump during SAI failure (sonic-net#2644) * [ResponsePublisher] add pipeline support (sonic-net#2511) * [dash] Fix compilation issue caused by missing include.
) *Merge remote-tracking branch 'upstream/master' into dash (sonic-net#2663) * Modify coppmgr mergeConfig to support preserving copp tables through reboot. (sonic-net#2548) * Avoid aborting orchagent when setting TUNNEL attributes (sonic-net#2591) * Handle Mac address 'none' (sonic-net#2593) * Increase diff coverage to 80% (sonic-net#2599) * Add missing parameter to on_switch_shutdown_request method. (sonic-net#2567) * Add ZMQ based ProducerStateTable and CustomerStateTable. * Revert "[voq][chassis]Add show fabric counters port/queue commands (sonic-net#2522)" (sonic-net#2611) * Added new attributes for Vnet and Vxlan ecmp configurations. (sonic-net#2584) * added support for monitoring, primary and adv_prefix and overlay_dmac. * [routesync] Fix for stale dynamic neighbor (sonic-net#2553) * [MuxOrch] Enabling neighbor when adding in active state (sonic-net#2601) * Changed the BFD default detect multiplier to 10x (sonic-net#2614) * Remove TODO comments that are no longer relevant (sonic-net#2622) * Fix issue #13341 ARP entry can be out of sync between kernel and APPL_DB if multiple updates are received from RTNL (sonic-net#2619) * [refactor]Refactoring sai handle status (sonic-net#2621) * Vxlan tunnel endpoint custom monitoring APPL DB table. (sonic-net#2589) * added support for monitoring, primary and adv_prefix. changed filter_mac to overlay_dmac * Data Structures and code to write APP_DB VNET_MONITOR table entries for custom monitoring of Vxlan tunnel endpoints. * [bfdorch] add local discriminator to state DB (sonic-net#2629) * [acl] Add new ACL key BTH_OPCODE and AETH_SYNDROME (sonic-net#2617) * [voq][chassis] Remove created ports from the default vlan. (sonic-net#2607) * [EVPN]Handling race condition when remote VNI arrives before tunnel map entry (sonic-net#2642) *Added check in remote VNI add to ensure vxlan tunnel map is created before adding the remote end point. * [test_mux] add sleep in test_NH (sonic-net#2648) * [autoneg]Fixing adv interface types to be set when AN is disabled (sonic-net#2638) * [hash]: Add UT infra. (sonic-net#2660) *Added UT infra for Generic Hash feature *Aligned PBH tests with Generic Hash UT infra * [sai_failure_dump]Invoking dump during SAI failure (sonic-net#2644) * [ResponsePublisher] add pipeline support (sonic-net#2511) * [dash] Fix compilation issue caused by missing include.
) *Merge remote-tracking branch 'upstream/master' into dash (sonic-net#2663) * Modify coppmgr mergeConfig to support preserving copp tables through reboot. (sonic-net#2548) * Avoid aborting orchagent when setting TUNNEL attributes (sonic-net#2591) * Handle Mac address 'none' (sonic-net#2593) * Increase diff coverage to 80% (sonic-net#2599) * Add missing parameter to on_switch_shutdown_request method. (sonic-net#2567) * Add ZMQ based ProducerStateTable and CustomerStateTable. * Revert "[voq][chassis]Add show fabric counters port/queue commands (sonic-net#2522)" (sonic-net#2611) * Added new attributes for Vnet and Vxlan ecmp configurations. (sonic-net#2584) * added support for monitoring, primary and adv_prefix and overlay_dmac. * [routesync] Fix for stale dynamic neighbor (sonic-net#2553) * [MuxOrch] Enabling neighbor when adding in active state (sonic-net#2601) * Changed the BFD default detect multiplier to 10x (sonic-net#2614) * Remove TODO comments that are no longer relevant (sonic-net#2622) * Fix issue #13341 ARP entry can be out of sync between kernel and APPL_DB if multiple updates are received from RTNL (sonic-net#2619) * [refactor]Refactoring sai handle status (sonic-net#2621) * Vxlan tunnel endpoint custom monitoring APPL DB table. (sonic-net#2589) * added support for monitoring, primary and adv_prefix. changed filter_mac to overlay_dmac * Data Structures and code to write APP_DB VNET_MONITOR table entries for custom monitoring of Vxlan tunnel endpoints. * [bfdorch] add local discriminator to state DB (sonic-net#2629) * [acl] Add new ACL key BTH_OPCODE and AETH_SYNDROME (sonic-net#2617) * [voq][chassis] Remove created ports from the default vlan. (sonic-net#2607) * [EVPN]Handling race condition when remote VNI arrives before tunnel map entry (sonic-net#2642) *Added check in remote VNI add to ensure vxlan tunnel map is created before adding the remote end point. * [test_mux] add sleep in test_NH (sonic-net#2648) * [autoneg]Fixing adv interface types to be set when AN is disabled (sonic-net#2638) * [hash]: Add UT infra. (sonic-net#2660) *Added UT infra for Generic Hash feature *Aligned PBH tests with Generic Hash UT infra * [sai_failure_dump]Invoking dump during SAI failure (sonic-net#2644) * [ResponsePublisher] add pipeline support (sonic-net#2511) * [dash] Fix compilation issue caused by missing include.
…#2607) Signed-off-by: Nathan Wolfe [email protected] What I did -Remove newly created ports from the default vlan on VOQ systems. -Add a test to confirm we're executing removeDefaultVlanMembers when a new port is added on a VOQ system. Why I did it -When a port is created via create_port SAI call the port may be added to the default vlan, this is undesired. How I verified it -On a 7800R3AK-36DM2 linecard with multiple 400G ports I verified that the TX_TAG_ENABLE field in ETPPC_EDITING_PER_PORT_TABLE was not set for and ports. This confirms that no port is a member of any vlan
Added a test case in test_virtual_chassis.py
Signed-off-by: Nathan Wolfe [email protected]
What I did
-Remove newly created ports from the default vlan on VOQ systems.
-Add a test to confirm we're executing
removeDefaultVlanMemberswhen a new port is added on a VOQ system.Why I did it
-When a port is created via create_port SAI call the port may be added to the default vlan, this is undesired.
How I verified it
-On a 7800R3AK-36DM2 linecard with multiple 400G ports I verified that the
TX_TAG_ENABLEfield inETPPC_EDITING_PER_PORT_TABLEwas not set for and ports. This confirms that no port is a member of any vlanNote: I believe we want this change
backported to 202205