current meter scale to 500

[P-I-Engineer]

current meter scale was incorrect. i have this aio for testing.

[lida2003]

current meter scale was incorrect. i have this aio for testing.

@P-I-Engineer Thanks for you PR. Currently, we are on Chinese Year Holiday. We can't look the data (in lab) before Feb 17.

Can you share your test data when configure scale 500?

I think it might be poorly calibrated. So we will check and re-do the calibration on Feb 17 back from holiday.

Ref: BetaFlight Current Calibration Guide

[P-I-Engineer]

inav current meter scale: 250
aocoda recommended scale: 540
betaflight config scale: 500

i flew with the scale at 500. i consumed 156mah per my telemetry, i charged 156mah back in. Obviously the number being the same is coincidental. But matches up way better than double the consumption when using a scale of 250.

[lida2003]

aocoda recommended scale: 540

Well, I'm NOT sure if there is any suggestion comes from us. But I indeed checked bf configurations, which is 500.

• betalight config: #define DEFAULT_CURRENT_METER_SCALE 500
• unified target: set ibata_scale = 500

As I didn't see any report or data for this AIO board right now. We'll check again, and then come back to the issue.

[lida2003]

@P-I-Engineer

We have did current calibration, and the result as below.

PR will be provided later.

BetaFlight/iNav Current Calibration Guide