Tutorials: Tabs tool

Here is a link to some useful information: https://staff.ltam.lu/feljc/software/cnc/bCNC_DXF_to_Gcode.pdf Here is a link to the original page: https://github.com/vlachoudis/bCNC/wiki/Tutorials:-Tabs-tool/83a2959fc01f23830583939ef1da345cc41c52c9

My first experience with this tool failed because the default settings in the "cut" tool had the "only leave selected islands uncut" box checked. This box needs to be unchecked or else the tool paths will cut through the tabs.