Detect SSL_new() returning NULL in outgoing connections #2140
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
zuiderkwast
force-pushed
the
ssl-new-error
branch
from
62e29d2 to
10b0463
Compare
Signed-off-by: Viktor Söderqvist <[email protected]>
zuiderkwast
force-pushed
the
ssl-new-error
branch
from
10b0463 to
1d09511
Compare
zuiderkwast
added
the
release-notes
Codecov ReportAll modified and coverable lines are covered by tests ✅
Additional details and impacted files@@ Coverage Diff @@
## unstable #2140 +/- ##
============================================
- Coverage 71.23% 71.21% -0.02%
============================================
Files 122 122
Lines 66049 66049
============================================
- Hits 47051 47039 -12
- Misses 18998 19010 +12
🚀 New features to boost your workflow:
|
hpatro
pushed a commit
to hpatro/valkey
that referenced
this pull request
Jun 4, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
hpatro
pushed a commit
to hpatro/valkey
that referenced
this pull request
Jun 4, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
Signed-off-by: Harkrishn Patro <[email protected]>
hpatro
pushed a commit
that referenced
this pull request
Jun 9, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
#1939 (comment).
Might fix #1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
Signed-off-by: Harkrishn Patro <[email protected]>
hpatro
pushed a commit
that referenced
this pull request
Jun 11, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
#1939 (comment).
Might fix #1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
Signed-off-by: Harkrishn Patro <[email protected]>
chzhoo
pushed a commit
to chzhoo/valkey
that referenced
this pull request
Jun 12, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
Signed-off-by: chzhoo <[email protected]>
vitarb
pushed a commit
to vitarb/valkey
that referenced
this pull request
Jun 12, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
(cherry picked from commit 17e6686)
Merged
vitarb
pushed a commit
to vitarb/valkey
that referenced
this pull request
Jun 13, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
(cherry picked from commit 17e6686)
shanwan1
pushed a commit
to shanwan1/valkey
that referenced
this pull request
Jun 13, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
Signed-off-by: shanwan1 <[email protected]>
ranshid
pushed a commit
to ranshid/valkey
that referenced
this pull request
Jun 18, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
ranshid
pushed a commit
to ranshid/valkey
that referenced
this pull request
Jun 22, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
ranshid
pushed a commit
that referenced
this pull request
Jul 7, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
#1939 (comment).
Might fix #1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
zuiderkwast
added a commit
to vitarb/valkey
that referenced
this pull request
Aug 15, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
(cherry picked from commit 17e6686)
zuiderkwast
added a commit
to vitarb/valkey
that referenced
this pull request
Aug 15, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
(cherry picked from commit 17e6686)
Signed-off-by: Viktor Söderqvist <[email protected]>
zuiderkwast
added a commit
to vitarb/valkey
that referenced
this pull request
Aug 21, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
(cherry picked from commit 17e6686)
Signed-off-by: Viktor Söderqvist <[email protected]>
zuiderkwast
added a commit
that referenced
this pull request
Aug 22, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
#1939 (comment).
Might fix #1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
(cherry picked from commit 17e6686)
Signed-off-by: Viktor Söderqvist <[email protected]>
sarthakaggarwal97
pushed a commit
to sarthakaggarwal97/valkey
that referenced
this pull request
Sep 16, 2025
When creating an outgoing TLS connection, we don't check if `SSL_new()`
returned NULL.
Without this patch, the check was done only for incoming connections in
`connCreateAcceptedTLS()`. This patch moves the check to
`createTLSConnection()` which is used both for incoming and outgoing
connections.
This check makes sure we fail the connection before going any further,
e.g. when `connCreate()` is followed by `connConnect()`, the latter
returns `C_ERR` which is commonly detected where outgoing connections
are established, such where a replica connects to a primary.
```c
int connectWithPrimary(void) {
server.repl_transfer_s = connCreate(connTypeOfReplication());
if (connConnect(server.repl_transfer_s, server.primary_host, server.primary_port, server.bind_source_addr,
server.repl_mptcp, syncWithPrimary) == C_ERR) {
serverLog(LL_WARNING, "Unable to connect to PRIMARY: %s", connGetLastError(server.repl_transfer_s));
connClose(server.repl_transfer_s);
server.repl_transfer_s = NULL;
return C_ERR;
}
```
For a more thorough explanation, see
valkey-io#1939 (comment).
Might fix valkey-io#1939.
Signed-off-by: Viktor Söderqvist <[email protected]>
(cherry picked from commit 17e6686)
Signed-off-by: Viktor Söderqvist <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
When creating an outgoing TLS connection, we don't check if
SSL_new()returned NULL.Without this patch, the check was done only for incoming connections in
connCreateAcceptedTLS(). This patch moves the check tocreateTLSConnection()which is used both for incoming and outgoing connections.This check makes sure we fail the connection before going any further, e.g. when
connCreate()is followed byconnConnect(), the latter returnsC_ERRwhich is commonly detected where outgoing connections are established, such where a replica connects to a primary.For a more thorough explanation, see #1939 (comment).
Might fix #1939.