Test Plan for Chassis/Multi-ASIC GCU

docs/testplan/Add-cluster-with-GCU.md

@@ -0,0 +1,168 @@
+# Add cluster with Generic Config Updater (GCU) Test Plan
+
+## Overview
+
+This test plan covers the dynamic addition of new T1 devices to a running T2 cluster. The feature allows updating the configuration at runtime using generic config update mechanisms, enabling the integration of new neighbors into the system without service disruption.
+
+### Objective
+Verify that:
+- New T1 devices can be added to a live T2 cluster via runtime configuration updates.
+- The devices are correctly registered in the system database.
+- Neighbor connections are established successfully.
+- The newly added devices are operational and can forward data traffic.
+
+### Affected Configuration Tables
+The following configuration/state tables are updated dynamically as part of this test:
+<pre>
+/BGP_NEIGHBOR
+/BUFFER_PG
+/CABLE_LENGTH
+/DEVICE_NEIGHBOR
+/DEVICE_NEIGHBOR_METADATA
+/INTERFACE
+/PORT
+/PORTCHANNEL_MEMBER
+/PORTCHANNEL_INTERFACE
+/PORT_QOS_MAP
+</pre>
+
+
+##  Generic Config Updater (GCU) Test Coverage for Multi-ASIC Support
+The existing community test coverage for the Generic Config Updater (GCU) has been enhanced to support running in multi-ASIC platforms and t2 topology.
+
+### Key Changes
+1. Multi-ASIC Adaptation:
+Test cases have been adapted to use a fixture that returns a random ASIC namespace for verification.
+
+2. Namespace Customization:
+For multi-ASIC DUT hosts, JSON patch paths are customized to include the namespace prefix. For changes in global paths, the /localhost prefix was added to the path.
+
+3. Single-ASIC Compatibility:
+For single-ASIC DUT hosts, no changes were made to the paths, ensuring compatibility with the existing test setup.
+
+### Test Case Updates
+
+- test_ipv6.py --> test_ip_bgp.py
+Previously, this test case verified paths only for IPv6 BGP neighbors. It has been expanded to run repeatedly for both IPv4 and IPv6 BGP neighbor types. As a result, the test suite file has been renamed to test_ip_bgp.py to reflect its broader scope.
+
+### Test PRs
+
+Above changes were added via Test PRs:
+- [Generalizing GCU test suite to verify both ip types (IPV4, IPV6) for BGP Neighbors](https://github.com/sonic-net/sonic-mgmt/pull/13650)
+- [[GCU] [MA] Adding support in existing tests - Common changes](https://github.com/sonic-net/sonic-mgmt/pull/15182)
+Separate test PRs handled the addition of T2/multi-ASIC GCU support. They can be tracked from PR #15182, as all related PRs are referenced there.
+
+## Testbed
+
+The test will run on T2 testbeds.
+
+## Testing Plan
+
+### Test Suite # 1 - Basic Add Cluster With Data Traffic
+
+#### Test Objective
+
+To verify updates in config paths:
+<pre>
+/BGP_NEIGHBOR
+/DEVICE_NEIGHBOR
+/DEVICE_NEIGHBOR_METADATA
+/PORTCHANNEL_MEMBER
+/PORTCHANNEL_INTERFACE
+/INTERFACE
+/PORT
+</pre>
+
+#### Test Requirements:
+
+At least two frontend DUT hosts are required to perform traffic. Modifications via apply-patch are applied on the downstream frontend DUT host. The scenario verifies data traffic from upstream to downstream and downstream to downstream.
+
+#### Testing Parameters
+
+- With/without acl config.
+- Apply-patch standalone/aggregrated changes.
+
+#### Setup Configuration
+
+- Select a random ASIC from the downstream host.
+- Select a random BGP neighbor from that namespace and announce a static route for a DST_IP that is advertised only via this neighbor.
+- Verify the route table in the downstream DUT host to ensure that the static route is visible.
+
+![](../testplan/images/Add_Cluster_Setup.PNG)
+
+Remove Peers from Downstream Namespace:
+- Remove all BGP neighbors for the selected ASIC namespace via apply-patch.
+- Verify the route table. All routes for BGP neighbors should be gone. Additionally, all kernel and directly connected routes toward the neighbor IPs should be removed.
+- Shutdown local interfaces for the selected ASIC namespace via apply-patch.
+- Verify that the admin status of local interfaces in the selected ASIC namespace is down/down.
+- Perform data traffic tests toward a randomly selected neighbor. Traffic should fail.
+- Perform data traffic tests toward the static route from the randomly selected neighbor. Traffic should fail.
+
+![](../testplan/images/Add_Cluster_Remove_Peers.PNG)
+
+Re-add Peers and Re-enable Interfaces:
+- Change cable lengths.
+- Re-add peers in the downstream namespace. -
+- Re-enable interfaces.
+- Verify that the peers are re-added, BGP sessions are established, and the route table is updated.
+- Verify the buffer profile exists in CONFIG_DB, APPL_DB, and ASIC_DB.
+
+![](../testplan/images/Add_Cluster_Readd_Peers.PNG)
+
+#### Testing Steps
+
+Data traffic verifications:
+- Perform data traffic tests toward a randomly selected neighbor/the static route from the randomly selected neighbor. Traffic should pass. Verify there are no packet drops via checking pkt counters.
+- Perform data traffic from upsteram to downstream linecard (interlinecard). Perform data traffic from the other asic of the same downsteram linecard (innerlinecard).
+- Variation with acl config (DATAACL, CTRLPLANE) verifies traffic passes/drops based on acl rules and src/dst port criterion.
+
+![](../testplan/images/Add_Cluster_Data_Validation_up-down.PNG)
+
+![](../testplan/images/Add_Cluster_Data_Validation_down-down.PNG)
+
+[to be enhanced]
+As a test variation, instead of applying changes per ASIC namespace, the same scenario shall be adapted to apply changes to a randomly selected interface that is a member of a portchannel from a randomly selected namespace.
+
+### Test Case # 2 - Update CABLE Length
+
+#### Test Objective
+
+To verify updates in config path
+</pre>
+/CABLE_LENGTH
+</pre>
+
+#### Testing Steps
+
+- Select a random ASIC namespace and shut down the interfaces.
+- Update cable length via apply-patch. Identify the current cable length and add the previous or next supported length value for this frontend card.
+- Bring the interfaces back up via apply-patch.
+- Verify that the interfaces are up.
+- Verify in CONFIG_DB and APPL_DB that the new cable length is applied.
+- Verify that updated pg lossless profile was created in CONFIG_DB and APPL_DB and that it was assigned to active interfaces.
+
+
+### Test Case # 3 - Load QoS
+
+#### Test Objective
+To verify qos updates in multi-asic t2 platform.
+To verify updates in tables
+<pre>
+/BUFFER_PG
+/PORT_QOS_MAP
+</pre>
+
+#### Testing Steps
+
+- Select a random ASIC namespace and shut down the interfaces. (to be modified per interface)
+- Remove QoS config via apply-patch remove operation for tables "BUFFER_PG", "PORT_QOS_MAP".
+- Verify that configuration is cleared in CONFIG_DB, APPL_DB.
+- Add back QoS config via apply-patch add operation in tables "BUFFER_PG", "PORT_QOS_MAP".
+- Verify that configuration is populated to CONFIG_DB, APPL_DB.
+- Bring the interfaces back up via apply-patch.
+- Verify that the interfaces are up.
+
+### Test PRs
+
+Above changes were added via Test PR:
+- [Adding new Tests for Chassis/Multi-ASIC GCU](https://github.com/sonic-net/sonic-mgmt/pull/14887)