[201911] Adding SKU Mellanox-SN3800-D100C12S2#7972
[201911] Adding SKU Mellanox-SN3800-D100C12S2#7972prsunny merged 10 commits intosonic-net:201911from
Conversation
| @@ -0,0 +1,2 @@ | |||
| SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800_2x10g_28x50g_48x100g.xml | |||
There was a problem hiding this comment.
why is the xml file name different from sai_3800_2x10g_100x50g_12x100g.xml?
There was a problem hiding this comment.
How is this change tested?
There was a problem hiding this comment.
okay, this has to be fixed. I will fix it.
|
Can someone from NVDIA team sign-off? @liat-grozovik , @volodymyrsamotiy . |
| Ethernet144 144,145,146,147 etp37 37 10000 | ||
| Ethernet148 148,149 etp38a 38 50000 | ||
| Ethernet150 150,151 etp38b 38 50000 | ||
| Ethernet152 152,153 etp39a 38 50000 |
There was a problem hiding this comment.
yes, it is. Sorry, I will fix it.
| @@ -0,0 +1 @@ | |||
| ../../x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 No newline at end of file | |||
There was a problem hiding this comment.
pg_profile is pointing to ../Mellanox-SN3800-D112C8/pg_profile_lookup.ini. Can you confirm if these soft-links are correct?
There was a problem hiding this comment.
yes I verified it on the workspace, the symbolic link is there. I also verified the pg_profile_lookup.ini file is viewable on the switch as well.
…er mode of 10G ports
alexrallen
left a comment
alexrallen
left a comment
There was a problem hiding this comment.
Approve with exception of 10G ports needing validation.
|
@liat-grozovik , @volodymyrsamotiy , @dgsudharsan , can we merge this? |
4 participants
Why I did it
To create a new SKU Mellanox-SN3800-D100C12S2
How I did it
I arrived at the SKU configuration values based on the following SKU template, Port mapping and number of uplinks and downlinks.
SKU template:
Port configuration
• Breakout mode for each port - Defined in port mapping
• Speed of the port Defined in Port mapping
• Auto-negotiation enable/disable No setting required
• FEC mode No setting required
• Type of transceiver used Not needed
Buffer configuration
• Shared headroom enable
• If shared headroom enabled what is the over-subscription ratio as in SN3800
• Dynamic Buffer disable
• In static buffer scenario how many uplinks and downlinks? as in SN3800
• 2km cable support required? no
Switch configuration
• Warmboot enabled? yes
• Should warmboot be added to SAI profile when enabled? yes
• Is VxLAN source port range set? yes
• Should Vxlan source port range be added to SAI profile when set. as in SN3800
• Is Static Policy Based Hashing enabled? no
Port Mapping
etp1 to etp36 split into 50G
etp37 and etp40 is 10G
etp38 and etp39 splint into 50G
etp41 to etp52 split into 50G
etp53 to etp64 is 100G
Number of Uplinks / Downlinks:
TO topology: 12 100G uplinks and rest all downlinks.
T1 topology: (SKU will not be used in T1 topology), so same 12 100G uplinks and rest all downlinks is used to arrive at buffer config values.
How to verify it
Build the image, install it on the 3800 switch and set the SKU and verify the ports come up with proper speeds.
Which release branch to backport (provide reason below if selected)
Description for the changelog
Changes are in sonic-buildimage/device/mellanox/x86_64-mlnx_msn3800-r0/Mellanox-SN3800-D100C12S2/ folder.
A picture of a cute animal (not mandatory but encouraged)