Sonic installer script for armhf

README.md

@@ -88,10 +88,14 @@ To build Arm32 bit for (ARMHF) plaform
 
     make configure PLATFORM=[ASIC_VENDOR] PLATFORM_ARCH=armhf
 
-    **example**:
+    make target/sonic-[ASIC_VENDER]-armhf.bin
+
+    # example:
 
     make configure PLATFORM=marvell-armhf PLATFORM_ARCH=armhf
 
+    make target/sonic-marvell-armhf.bin
+
 
 
 To build Arm64 bit for plaform
@@ -100,7 +104,7 @@ To build Arm64 bit for plaform
 
     make configure PLATFORM=[ASIC_VENDOR] PLATFORM_ARCH=arm64
 
-    **example**:
+    # example:
 
     make configure PLATFORM=marvell-arm64 PLATFORM_ARCH=arm64
 

installer/armhf/install.sh

@@ -1,9 +1,7 @@
 #!/bin/sh
 
-#  Copyright (C) 2014,2015 Curt Brune <curt@cumulusnetworks.com>
-#  Copyright (C) 2015 david_yang <david_yang@accton.com>
+#  Copyright (C) Marvell Inc
 #
-#  SPDX-License-Identifier:     GPL-2.0
 
 set -e
 
@@ -42,88 +40,13 @@ hw_load() {
 
 . ./platform.conf
 
-#install_uimage
-
-#hw_load_str="$(hw_load)"
-
-echo "Copying uImage to NAND flash:"
-# global mount defines
-demo_dev=ubi0
-mtd_dev=/dev/$(cat /proc/mtd | grep "SONIC" | grep -o "mtd[0-9]")
-mtd_num=$(echo $mtd_dev | grep -o "[0-9]")
-demo_mount=/tmp
-onie_dev=$(blkid | grep ONIE-BOOT | head -n 1 | awk '{print $1}' |  sed -e 's/:.*$//')
-
-echo "Format mtd partition '$mtd_dev'"
-ubiformat $mtd_dev
-#attaches MTD devices (which describe raw flash) to UBI and creates corresponding UBI devices; ('-m 2' --> mtd2)
-echo "ubiattach mtd '$mtd_num'"
-ubiattach /dev/ubi_ctrl -m $mtd_num
-#creates UBI volumes on UBI devices
-ubimkvol  /dev/$demo_dev -N $demo_dev -s 3700MiB
-
-demo_mount=$(mktemp -d)
-mkdir -p $demo_mount
-echo "Mounting ubifs partition"
-mount -t ubifs /dev/ubi0_0 $demo_mount
-echo "Mounting $demo_dev on $demo_mount..."
-echo "sonic extract image starts ..."
-# Decompress the file for the file system directly to the partition
-unzip -o $ONIE_INSTALLER_PAYLOAD -x "$FILESYSTEM_DOCKERFS" -d $demo_mount/
-cd $demo_mount
-if [ -f fs.cpio ]
-then
-    cpio -id < fs.cpio
-    rm fs.cpio
-elif [ -f fs.squashfs ]
-then
-    unsquashfs -f -d $demo_mount fs.squashfs
-    rm -f fs.squashfs
-fi
-cd -
-TAR_EXTRA_OPTION="--numeric-owner"
-mkdir -p $demo_mount/var/lib/$DOCKERFS_DIR
-unzip -op $ONIE_INSTALLER_PAYLOAD "$FILESYSTEM_DOCKERFS" | tar -xpz $TAR_EXTRA_OPTION -f - -C $demo_mount/var/lib/$DOCKERFS_DIR
+install_uimage
 
-echo "unmounting nand partition"
-umount $demo_mount
+hw_load_str="$(hw_load)"
 
 echo "Updating U-Boot environment variables"
-#global uboot enviroment settings
-FW_ENV='/dev/mtd0 \t\t 0x00500000 \t 0x80000 \t 0x100000 \t 8'
-
-kernel_addr=0x1100000
-fdt_addr=0x1000000
-
-image_name="/boot/zImage"
-fdt_name="/boot/armada-385-ET6448M_4G_Nand.dtb"
-
-#BOOTARGS='setenv bootargs root='$demo_dev' rw rootwait ubi.mtd='$mtd_num' rootfstype=ubifs debug panic=1 ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off console=ttyS0,115200 ${othbootargs} ${mtdparts}'
-BOOTARGS='setenv bootargs root='$demo_dev' rw rootwait ubi.mtd='$mtd_num' rootfstype=ubifs panic=1 console=ttyS0,115200 ${othbootargs} ${mtdparts}'
-UBI_LOAD='run ubi_sonic_boot_mount_ubi; ubifsload $kernel_addr $image_name;ubifsload $fdt_addr $fdt_name'
-UBIBOOTCMD='run ubi_sonic_boot_bootargs; run ubi_sonic_boot_load; bootz $kernel_addr - $fdt_addr'
-
-
-echo -e $FW_ENV > /etc/fw_env.config
-
-fw_setenv -f image_name $image_name > /dev/null
-fw_setenv -f fdt_name $fdt_name > /dev/null
-fw_setenv -f kernel_addr $kernel_addr > /dev/null
-fw_setenv -f fdt_addr $fdt_addr > /dev/null
-
-#make sure ubi number (0) and ubi volume name (ubi0) are set correctly in bootargs_root:
-#For example, the below command creates an 3000MiB volume on UBI device 0:
-#setenv bootargs_root root=ubi0:ubi0 rw ubi.mtd=2 rootfstype=ubifs
-
-fw_setenv -f mtdids 'nand0=armada-nand' > /dev/null
-fw_setenv -f mtdparts 'mtdparts=armada-nand:10m(U-Boot)ro,208m@10m(ONIE),-(SONIC)' > /dev/null
-fw_setenv -f ubi_sonic_boot_mount_ubi 'ubi part SONIC; ubifsmount ubi0' > /dev/null
-
-fw_setenv -f ubi_sonic_boot_bootargs $BOOTARGS > /dev/null
-fw_setenv -f ubi_sonic_boot_load $UBI_LOAD > /dev/null
-fw_setenv -f ubi_sonic_boot $UBIBOOTCMD > /dev/null
-fw_setenv -f bootcmd 'usb start; run ubi_sonic_boot' > /dev/null
 
+fw_setenv -f -s /tmp/env.txt
 
 cd /
 

platform/marvell-armhf/one-image.mk

@@ -1,7 +1,7 @@
 # sonic marvell one image installer
 
-SONIC_ONE_IMAGE = sonic-marvell.bin
-$(SONIC_ONE_IMAGE)_MACHINE = marvell
+SONIC_ONE_IMAGE = sonic-marvell-armhf.bin
+$(SONIC_ONE_IMAGE)_MACHINE = marvell-armhf
 $(SONIC_ONE_IMAGE)_IMAGE_TYPE = onie
 $(SONIC_ONE_IMAGE)_INSTALLS += $(SYSTEMD_SONIC_GENERATOR)
 ifeq ($(INSTALL_DEBUG_TOOLS),y)

platform/marvell-armhf/platform.conf

@@ -0,0 +1,134 @@
+#  Copyright (C) Marvell Inc
+
+# over ride default behaviour
+
+echo "Preparing for installation ... "
+
+# global defines
+kernel_addr=0x1100000
+fdt_addr=0x1000000
+
+image_name="/boot/zImage"
+fdt_name="/boot/armada-385-ET6448M_4G_Nand.dtb"
+
+# global mount defines
+demo_dev=ubi0
+mtd_dev=/dev/$(cat /proc/mtd | grep "SONIC" | grep -o "mtd[0-9]")
+mtd_num=$(echo $mtd_dev | grep -o "[0-9]")
+demo_mount=/tmp
+FW_ENV='/dev/mtd0 \t\t 0x00500000 \t 0x80000 \t 0x100000 \t 8'
+
+BOOTARGS='setenv bootargs root='$demo_dev' rw rootwait ubi.mtd='$mtd_num' rootfstype=ubifs panic=1 console=ttyS0,115200 ${othbootargs} ${mtdparts}'
+UBI_LOAD='run ubi_sonic_boot_mount_ubi; ubifsload $kernel_addr $image_name;ubifsload $fdt_addr $fdt_name'
+UBIBOOTCMD='run ubi_sonic_boot_bootargs; run ubi_sonic_boot_load; bootz $kernel_addr - $fdt_addr'
+
+et6448m_machine_conf() {
+
+    echo "Configure platform et6448m "
+    rm $demo_mount/lib/udev/rules.d/73-usb-net-by-mac.rules
+    rm -f $demo_mount/usr/bin/reboot || true
+    rm -fr $demo_mount/host/machine.conf 
+    cp /etc/machine.conf $demo_mount/host/
+
+    SONIC_VERSION=$(cat $demo_mount/etc/sonic/sonic_version.yml | grep build_version | cut -f2 -d"'")
+    FIRST_BOOT_FILE="$demo_mount/host/image-$SONIC_VERSION/platform"
+    mkdir -p $FIRST_BOOT_FILE
+    touch $FIRST_BOOT_FILE/firsttime
+
+    MAC_ADDR=$(fw_printenv | grep ^ethaddr= | cut -f2 -d"=")
+    sed -i "s/switchMacAddress=.*/switchMacAddress=$MAC_ADDR/g" $demo_mount/usr/share/sonic/device/armhf-marvell_et6448m_52x-r0/et6448m/profile.ini
+}
+
+prepare_uboot() {
+    echo "Setting up U-Boot environment..."
+
+    echo -e $FW_ENV > /etc/fw_env.config
+
+    fw_setenv -f image_name $image_name > /dev/null
+    fw_setenv -f fdt_name $fdt_name > /dev/null
+    fw_setenv -f kernel_addr $kernel_addr > /dev/null
+    fw_setenv -f fdt_addr $fdt_addr > /dev/null
+
+    #make sure ubi number (0) and ubi volume name (ubi0) are set correctly in bootargs_root:
+    #For example, the below command creates an 3000MiB volume on UBI device 0:
+    #setenv bootargs_root root=ubi0:ubi0 rw ubi.mtd=2 rootfstype=ubifs
+
+    fw_setenv -f mtdids 'nand0=armada-nand' > /dev/null
+    fw_setenv -f mtdparts 'mtdparts=armada-nand:10m(U-Boot)ro,20m@10m(ONIE),-(SONIC)' > /dev/null
+    fw_setenv -f ubi_sonic_boot_mount_ubi 'ubi part SONIC; ubifsmount ubi0' > /dev/null
+
+    fw_setenv -f ubi_sonic_boot_bootargs $BOOTARGS > /dev/null
+    fw_setenv -f ubi_sonic_boot_load $UBI_LOAD > /dev/null
+    fw_setenv -f ubi_sonic_boot $UBIBOOTCMD > /dev/null
+    fw_setenv -f bootcmd 'usb start; run ubi_sonic_boot' > /dev/null
+
+}
+
+install_uimage() {
+
+    ubidetach /dev/ubi_ctrl -m $mtd_num 2>/dev/null || true 
+
+    echo -en "Format mtd partition '$mtd_dev' "
+    ubiformat $mtd_dev -y -q || {
+        echo "Failed"
+    }
+
+    #attaches MTD devices (which describe raw flash) to UBI and creates corresponding UBI devices; ('-m 2' --> mtd2)
+    echo -en "ubiattach mtd '$mtd_num' "
+    ubiattach /dev/ubi_ctrl -m $mtd_num || {
+        echo "Failed"
+    }
+
+    #creates UBI volumes on UBI devices
+    ubimkvol  /dev/$demo_dev -N $demo_dev -s 3900MiB
+
+    demo_mount=$(mktemp -d) || {
+        echo "Error: Unable to create file sstem mount point"
+        exit 1
+    }
+
+    echo "Mounting $demo_dev on $demo_mount "
+    mount -t ubifs /dev/ubi0_0 $demo_mount || {
+        echo "Failed"
+    }
+
+    echo "Extracting NOS "
+
+    # Decompress the file for the file system directly to the partition
+    unzip -o $ONIE_INSTALLER_PAYLOAD -x "$FILESYSTEM_DOCKERFS" -d $demo_mount/
+    cd $demo_mount
+
+    if [ -f fs.cpio ]; then
+        cpio -id < fs.cpio
+        if [ $? -ne 0 ]; then
+            echo "cpio extraction Failed"
+        fi
+        rm fs.cpio
+    elif [ -f fs.squashfs ]; then
+        unsquashfs -f -d $demo_mount $FILESYSTEM_SQUASHFS
+        if [ $? -ne 0 ]; then
+            echo "unsquashfs extraction Failed"
+        fi
+        rm -f $FILESYSTEM_SQUASHFS
+    fi
+
+    cd -
+    TAR_EXTRA_OPTION="--numeric-owner"
+    mkdir -p $demo_mount/var/lib/$DOCKERFS_DIR
+    unzip -op $ONIE_INSTALLER_PAYLOAD "$FILESYSTEM_DOCKERFS" | tar -xpz $TAR_EXTRA_OPTION -f - -C $demo_mount/var/lib/$DOCKERFS_DIR
+
+    # Update uboot Environment
+    prepare_uboot
+
+    # Platform configuration
+    et6448m_machine_conf
+
+    # Unmounting mount path
+    umount $demo_mount
+
+    echo "Reboot board to boot from installed OS"
+}
+
+hw_load() {
+    echo "mtdpart default && ubi part SONIC && ubifsmount 'demo_dev' && ubifsload '$kernel_addr' 'image_name'"
+}