sonic-cfggen with sonicv2 dockers

dockers/docker-fpm/Dockerfile.j2

@@ -2,7 +2,10 @@ FROM docker-base
 
 RUN apt-get update
 
-RUN apt-get install -y libdbus-1-3 libdaemon0 libjansson4
+RUN apt-get install -y libdbus-1-3 libdaemon0 libjansson4 
+
+# Dependencies for sonic-cfggen 
+RUN apt-get install -y python-lxml python-jinja2 python-netaddr python-ipaddr python-yaml 
 
 COPY \
 {% for deb in docker_fpm_debs.split(' ') -%}
@@ -19,7 +22,9 @@ debs/{{ deb }}{{' '}}
 RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y
 RUN rm -rf /debs
 
-COPY ["start.sh", "/usr/bin/"]
+COPY ["*.j2", "/etc/swss/bgp/"]
+COPY ["start.sh", "config.sh", "/usr/bin/"]
 
-ENTRYPOINT /usr/bin/start.sh    \
+ENTRYPOINT /usr/bin/config.sh   \
+        && /usr/bin/start.sh    \
         && /bin/bash

dockers/docker-fpm/bgpd.conf.j2

@@ -0,0 +1,63 @@
+!
+{% block banner %}
+! =========== Managed by sonic-cfggen DO NOT edit manually! ====================
+! generated by templates/quagga/bgpd.conf.j2 using minigraph_facts.py
+! file: bgpd.conf
+!
+{% endblock banner %}
+!
+{% block system_init %}
+hostname {{ inventory_hostname }}
+password zebra
+log syslog informational
+log facility local4
+! enable password {# {{ en_passwd }} TODO: param needed #}
+{% endblock system_init %}
+!
+{% block bgp_init %}
+!
+! bgp multiple-instance
+!
+router bgp {{ minigraph_bgp_asn }}
+  bgp log-neighbor-changes
+  bgp bestpath as-path multipath-relax
+{# TODO: use lo[0] for backward compatibility, will revisit the case with multiple lo interfaces #}
+  bgp router-id {{ minigraph_lo_interfaces[0]['addr'] }}
+{# advertise loopback #}
+{% for lo in minigraph_lo_interfaces %}
+{% if lo['addr'] | ipv4 %}
+  network {{ lo['addr'] }}/32
+{% elif lo['addr'] | ipv6 %}
+  address-family ipv6
+    network {{ lo['addr'] }}/128
+  exit-address-family
+{% endif %}
+{% endfor %}
+{% endblock bgp_init %}
+{% block vlan_advertisement %}
+{% for interface in minigraph_interfaces %}
+{% if interface['name'].startswith('Vlan') %}
+  network {{ interface['subnet'] }}
+{% endif %}
+{% endfor %}
+{% endblock vlan_advertisement %}
+{% block bgp_sessions %}
+{% for bgp_session in minigraph_bgp %}
+{% if bgp_session['asn'] != 0 %}
+  neighbor {{ bgp_session['addr'] }} remote-as {{ bgp_session['asn'] }}
+  neighbor {{ bgp_session['addr'] }} description {{ bgp_session['name'] }}
+{% if bgp_session['addr'] | ipv6 %}
+  address-family ipv6
+    neighbor {{ bgp_session['addr'] }} activate
+    maximum-paths 64
+  exit-address-family
+{% endif %}
+{% endif %}
+{% endfor %}
+{% endblock bgp_sessions %}
+!
+maximum-paths 64
+!
+route-map ISOLATE permit 10
+set as-path prepend {{ minigraph_bgp_asn }}
+!

dockers/docker-fpm/config.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+mkdir -p /etc/quagga
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /etc/swss/bgp/bgpd.conf.j2 >/etc/quagga/bgpd.conf
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /etc/swss/bgp/zebra.conf.j2 >/etc/quagga/zebra.conf
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /etc/swss/bgp/isolate.j2 >/usr/sbin/bgp-isolate
+chown root:root /usr/sbin/bgp-isolate
+chmod 0755 /usr/sbin/bgp-isolate
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /etc/swss/bgp/unisolate.j2 >/usr/sbin/bgp-unisolate
+chown root:root /usr/sbin/bgp-unisolate
+chmod 0755 /usr/sbin/bgp-unisolate
+

dockers/docker-fpm/isolate.j2

@@ -0,0 +1,20 @@
+#!/bin/bash
+## vtysh only accepts script in stdin, so cannot be directly used in shebang
+## Cut the tail of this script and feed vtysh stdin
+sed -n -e '9,$p' < "$0" | vtysh "$@"
+## Exit with vtysh return code
+exit $?
+
+## vtysh script start from next line, which line number MUST eqaul in 'sed' command above
+
+configure terminal
+  router bgp {{ minigraph_bgp_asn }}
+{% for bgp_session in minigraph_bgp %}
+    neighbor {{ bgp_session['addr'] }} route-map ISOLATE out
+{% endfor %}
+  exit
+exit
+
+{% for bgp_session in minigraph_bgp %}
+clear ip bgp {{ bgp_session['addr'] }} soft out
+{% endfor %}

dockers/docker-fpm/unisolate.j2

@@ -0,0 +1,20 @@
+#!/bin/bash
+## vtysh only accepts script in stdin, so cannot be directly used in shebang
+## Cut the tail of this script and feed vtysh stdin
+sed -n -e '9,$p' < "$0" | vtysh "$@"
+## Exit with vtysh return code
+exit $?
+
+## vtysh script start from next line, which line number MUST eqaul in 'sed' command above
+
+configure terminal
+  router bgp {{ minigraph_bgp_asn }}
+{% for bgp_session in minigraph_bgp %}
+    no neighbor {{ bgp_session['addr'] }} route-map ISOLATE out
+{% endfor %}
+  exit
+exit
+
+{% for bgp_session in minigraph_bgp %}
+clear ip bgp {{ bgp_session['addr'] }} soft out
+{% endfor %}

dockers/docker-fpm/zebra.conf.j2

@@ -0,0 +1,61 @@
+!
+{% block banner %}
+! =========== Managed by sonic-cfggen DO NOT edit manually! ====================
+! generated by templates/quagga/zebra.conf.j2 using minigraph_facts.py
+! file: zebra.conf
+!
+{% endblock banner %}
+!
+{% block sys_init %}
+hostname {{ inventory_hostname }}
+password zebra
+enable password zebra
+{% endblock sys_init %}
+!
+{% block interfaces %}
+! Enable link-detect (default disabled)
+{% for interface in minigraph_interfaces %}
+interface {{ interface['alias'] }}
+link-detect
+!
+{% endfor %}
+{% endblock interfaces %}
+!
+{% block default_route %}
+! set static default route to mgmt gateway as a backup to learned default
+ip route 0.0.0.0/0 {{ minigraph_mgmt_interface['gwaddr'] }} 200
+{% endblock default_route %}
+!
+{% block source_loopback %}
+! Set ip source to loopback for bgp learned routes
+route-map RM_SET_SRC permit 10
+    set src {{ minigraph_lo_interfaces[0]['addr'] }}
+!
+{% set lo_ipv6_addrs = [] %}
+{% if minigraph_lo_interfaces is defined %}
+{%   for interface in minigraph_lo_interfaces %}
+{%     if interface['addr'] is defined and interface['addr']|ipv6 %}
+{%       if lo_ipv6_addrs.append(interface['addr']) %}
+{%       endif %}
+{%     endif %}
+{%   endfor %}
+{% endif %}
+{% if lo_ipv6_addrs|length > 0 %} 
+route-map RM_SET_SRC6 permit 10
+    set src {{ lo_ipv6_addrs[0] }}
+!
+{% endif %}
+ip protocol bgp route-map RM_SET_SRC
+!
+{% if lo_ipv6_addrs|length > 0 %}
+ipv6 protocol bgp route-map RM_SET_SRC6
+!
+{% endif %}
+{% endblock source_loopback %}
+!
+{% block logging %}
+log syslog informational
+log facility local4
+{% endblock logging %}
+!
+

dockers/docker-lldp-sv2/Dockerfile.j2

@@ -8,7 +8,10 @@ debs/
 
 COPY python-wheels /python-wheels
 
-RUN apt-get update && apt-get install -y python-pip supervisor libbsd0 libevent-2.0-5 libjansson4 libwrap0 libxml2 libpci3 libperl5.20
+RUN apt-get update && apt-get install -y python-pip supervisor libbsd0 libevent-2.0-5 libjansson4 libwrap0 libxml2 libpci3 libperl5.20 
+
+# Dependencies for sonic-cfggen                                                                                                                                                           
+RUN apt-get install -y python-lxml python-jinja2 python-netaddr python-ipaddr python-yaml 
 
 ## Pre-install the fundamental packages
 ## Install Python SSWSDK
@@ -27,5 +30,8 @@ RUN pip install /python-wheels/sswsdk-2.0.1-py2-none-any.whl && \
 
 COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
 COPY reconfigure.sh /opt/reconfigure.sh
+COPY ["config.sh", "/usr/bin/"]
+COPY ["lldpd.conf.j2", "/etc/swss/lldp/"]
+COPY ["lldpd", "/etc/default/"]
 
-ENTRYPOINT ["/usr/bin/supervisord"]
+ENTRYPOINT /usr/bin/config.sh && /usr/bin/supervisord

dockers/docker-lldp-sv2/config.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /etc/swss/lldp/lldpd.conf.j2 >/etc/lldpd.conf
+

dockers/docker-lldp-sv2/lldpd

@@ -0,0 +1,6 @@
+###############################################################################
+# Managed by sonic-cfggen
+###############################################################################
+
+# Uncomment to start SNMP subagent and enable CDP, SONMP and EDP protocol
+DAEMON_ARGS=""

dockers/docker-lldp-sv2/lldpd.conf.j2

@@ -0,0 +1,3 @@
+{% for member in alias_map %}
+configure ports {{member['sonic']}} lldp portidsubtype local {{member['origin']}}
+{% endfor %}

dockers/docker-platform-monitor/Dockerfile.j2

@@ -0,0 +1,28 @@
+FROM docker-base
+
+RUN apt-get update
+
+RUN apt-get install -y smartmontools sensord 
+
+# Dependencies for sonic-cfggen                                                                                                                                                           
+RUN apt-get install -y python-lxml python-jinja2 python-netaddr python-ipaddr python-yaml 
+
+COPY debs/ debs
+
+RUN dpkg -i \
+{% for deb in docker_fpm_debs.split(' ') -%}
+debs/{{ deb }}{{' '}}
+{%- endfor %}
+
+## Clean up
+RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y
+RUN rm -rf /debs
+
+COPY ["config.sh", "/usr/bin/"]
+
+ENTRYPOINT /usr/bin/config.sh       \
+    && service rsyslog start        \
+    && service lm-sensors start     \
+    && service smartmontools start  \
+    && service sensord start        \
+    && /bin/bash

dockers/docker-platform-monitor/config.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+mkdir -p /etc/sensors.d
+
+hwsku=`sonic-cfggen -m /etc/sonic/minigraph.xml -v minigraph_hwsku`
+/bin/cp -rf /usr/share/sonic/$hwsku/sensors.conf /etc/sensors.d/
+

dockers/docker-snmp-sv2/Dockerfile.j2

@@ -17,6 +17,9 @@ ENV PYTHONOPTIMIZE 1
 ## Clean up
 RUN apt-get update && apt-get install -y libmysqlclient-dev libmysqld-dev libperl-dev libpci-dev libpci3 libsensors4 libsensors4-dev libwrap0-dev
 
+# Dependencies for sonic-cfggen                                                                                                                                                           
+RUN apt-get install -y python-lxml python-jinja2 python-netaddr python-ipaddr python-yaml 
+
 RUN dpkg -i \
 {% for deb in docker_snmp_sv2_debs.split(' ') -%}
 debs/{{ deb }}{{' '}}
@@ -44,8 +47,11 @@ RUN apt-get -y install build-essential wget libssl-dev openssl supervisor && \
     rm -rf ~/.cache
 
 COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
+COPY ["*.j2", "/etc/swss/snmp/"]
+COPY ["snmpd", "/etc/default/"]
+COPY ["config.sh", "/usr/bin/"]
 
 ## Although exposing ports is not need for host net mode, keep it for possible bridge mode
 EXPOSE 161/udp 162/udp
 
-ENTRYPOINT ["/usr/bin/supervisord"]
+ENTRYPOINT /usr/bin/config.sh && /usr/bin/supervisord 

dockers/docker-snmp-sv2/config.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+#sysDescription is currently mounted, uncomment this line and provide version.yml instead if use copying instead of mounting
+#sonic-cfggen -m /etc/sonic/minigraph.xml -y /etc/sonic/version.yml -t /etc/swss/snmp/sysDescription.j2 >/etc/ssw/sysDescription
+
+mkdir -p /etc/snmp
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -y /etc/sonic/snmp.yml -t /etc/swss/snmp/snmpd.conf.j2 >/etc/snmp/snmpd.conf
+
+hwsku=`sonic-cfggen -m /etc/sonic/minigraph.xml -v minigraph_hwsku`
+/bin/cp -rf /usr/share/sonic/$hwsku/alias_map.json /etc/snmp/
+
+

dockers/docker-snmp-sv2/snmpd

@@ -0,0 +1,11 @@
+# This file controls the activity of snmpd
+
+# Don't load any MIBs by default.
+# You might comment this lines once you have the MIBs downloaded.
+export MIBS=
+
+# snmpd control (yes means start daemon).
+SNMPDRUN=yes
+
+# snmpd options (use syslog, close stdin/out/err).
+SNMPDOPTS='-LS4d -Lf /dev/null -u snmp -g snmp -I -smux,mteTrigger,mteTriggerConf,ifTable,ifXTable -p /run/snmpd.pid'