[AHM] Final Staking Configs for Kusama#883
Merged
ggwpez merged 11 commits intooty-dev-asset-hub-migration-2506from Sep 6, 2025
Merged
[AHM] Final Staking Configs for Kusama#883ggwpez merged 11 commits intooty-dev-asset-hub-migration-2506from
ggwpez merged 11 commits intooty-dev-asset-hub-migration-2506from
Conversation
Contributor
I think it should be: according to the setup: |
Contributor
Author
|
/cmd bench --runtime asset-hub-kusama --pallet pallet_election_provider_multi_block pallet_election_provider_multi_block_signed pallet_election_provider_multi_block_unsigned pallet_election_provider_multi_block_verifier pallet_staking_async --clean |
Contributor
|
/cmd bench --runtime asset-hub-kusama --pallet pallet_election_provider_multi_block pallet_election_provider_multi_block_signed pallet_election_provider_multi_block_unsigned pallet_election_provider_multi_block_verifier pallet_staking_async --clean |
|
Command "bench --runtime asset-hub-kusama --pallet pallet_election_provider_multi_block pallet_election_provider_multi_block_signed pallet_election_provider_multi_block_unsigned pallet_election_provider_multi_block_verifier pallet_staking_async --clean" has started 🚀 See logs here |
kianenigma
commented
Sep 5, 2025
| RuntimeParameters::Treasury(dynamic_params::treasury::Parameters::BurnPortion( | ||
| dynamic_params::treasury::BurnPortion, | ||
| Some(Permill::from_percent(0)), | ||
| // TODO: @kianenigma/!bkontur - is this ok? |
Contributor
Author
There was a problem hiding this comment.
Why is this needed to begin with? some benchmarks fail without it? I though the default for MinInflation is already defined above in all cases.
Contributor
There was a problem hiding this comment.
Why is this needed to begin with? some benchmarks fail without it? I though the default for
MinInflationis already defined above in all cases.
I don't know, this impl Default is kind of confusing, but something on the way requires that.
I just copy this according to actual relay/kusama: https://github.com/polkadot-fellows/runtimes/blob/main/relay/kusama/src/lib.rs#L753-L756
Member
There was a problem hiding this comment.
Benchmarks have a where bound for RuntimeParameters: Default. So you just return any variant, does not matter which. Otherwise the benchmark would have no way to construct this opaque type.
ggwpez
reviewed
Sep 5, 2025
relay/kusama/src/lib.rs
Outdated
| type UnixTime = Timestamp; | ||
| type PointsPerBlock = ConstU32<20>; | ||
| // TODO @kianenigma | ||
| type MaxOffenceBatchSize = ConstU32<50>; |
ggwpez
reviewed
Sep 5, 2025
| let message = SessionReportToXcm::convert(session_report); | ||
| let dest = AssetHubLocation::get(); | ||
| let _ = xcm::prelude::send_xcm::<xcm_config::XcmRouter>(dest, message).inspect_err(|err| { | ||
| log::error!(target: "runtime::ah-client", "Failed to send relay session report: {:?}", err); |
Contributor
Author
There was a problem hiding this comment.
We can't handle the error before paritytech/polkadot-sdk#9619
We might be able to merge it next week, let's see.
ggwpez
reviewed
Sep 5, 2025
| // TODO: after https://github.com/paritytech/polkadot-sdk/pull/9619, use `XCMSender::send` and handle error | ||
| let _ = send_xcm::<xcm_config::XcmRouter>(AssetHubLocation::get(), message).inspect_err( | ||
| |err| { | ||
| log::error!(target: "runtime::ah-client", "Failed to send relay offence message: {:?}", err); |
Contributor
Author
There was a problem hiding this comment.
We can't handle the error before paritytech/polkadot-sdk#9619
We might be able to merge it next week, let's see.
ggwpez
reviewed
Sep 5, 2025
| "staking": { | ||
| "validatorCount": 1000, | ||
| "devStakers": Some((2_000, 25_000)), | ||
| "devStakers": Some((4_000, 15_000)), |
Member
There was a problem hiding this comment.
I had some TODO in a checklist for you to set some Genesis config values for Kusama, is this it? Can i Check that off?
Contributor
Author
There was a problem hiding this comment.
Yeah this is correct now and no benchmarks shoulf fail.
ggwpez
reviewed
Sep 5, 2025
| /// Parameters used to calculate staking era payouts. | ||
| #[dynamic_pallet_params] | ||
| #[codec(index = 0)] | ||
| pub mod inflation { |
Member
There was a problem hiding this comment.
Not sure if you saw Gavs recent interview, but he basically argued that Inflation is not the right terminology, but rather Interest or Issuance.
ggwpez
reviewed
Sep 5, 2025
Comment on lines
+1346
to
+1347
| // TODO: @kianenigma/!bkontur - do we want to allow StakingAdmin here? | ||
| Inflation(_) => frame_system::ensure_root(origin.clone()), |
Member
There was a problem hiding this comment.
Suggested change
| // TODO: @kianenigma/!bkontur - do we want to allow StakingAdmin here? | |
| Inflation(_) => frame_system::ensure_root(origin.clone()), | |
| Inflation(_) => frame_system::ensure_root(origin.clone()), |
I think root is okay, there should only be changes needed to this rarely.
Contributor
Author
There was a problem hiding this comment.
True, inflation should be root-only, will fix.
ggwpez
reviewed
Sep 5, 2025
| // NOTES: | ||
| // * a lot of the parameters are defined as `storage` such that they can be upgraded with a smaller | ||
| // overhead by the root origin, as opposed to a code upgrade. We expect to remove them. If all | ||
| // goes well in Kusama AHM, we can stop using `storage` in Polkadot. |
Member
There was a problem hiding this comment.
They could also be in the parameter pallet
ggwpez
reviewed
Sep 5, 2025
| /// At the time of writing, Kusama has 1000 active validators, and ~2k validator candidates. | ||
| /// | ||
| /// Safety note: This increases the weight of `on_initialize_into_snapshot_msp` weight. Double check TODO @kianenigma. | ||
| pub storage TargetSnapshotPerBlock: u32 = 3000; |
ggwpez
reviewed
Sep 5, 2025
| 5 | ||
| } else { | ||
| if matches!( | ||
| pallet_ah_migrator::AhMigrationStage::<Runtime>::get(), |
Member
There was a problem hiding this comment.
Suggested change
| pallet_ah_migrator::AhMigrationStage::<Runtime>::get(), | |
| pallet_ah_migrator::AhMigrationStage::<Runtime>::get().is_finished() |
There should be a function like this, but it would do the same.
ggwpez
reviewed
Sep 5, 2025
system-parachains/asset-hubs/asset-hub-kusama/src/staking/mod.rs
Outdated
Show resolved
Hide resolved
ggwpez
reviewed
Sep 5, 2025
| use crate::dynamic_params; | ||
|
|
||
| // TODO @kianenigma one sanity check test for this as we had in the RC | ||
| let params = polkadot_runtime_common::impls::EraPayoutParams { |
ggwpez
reviewed
Sep 5, 2025
| /// confused in case AH block times change. Ideally, this value should be updated alongside AH's | ||
| /// block time. If AH blocks progress faster, our eras will become shorter, which is not a | ||
| /// critical issue. | ||
| pub const RelaySessionDuration: BlockNumber = 1 * HOURS; |
Member
There was a problem hiding this comment.
Suggested change
| pub const RelaySessionDuration: BlockNumber = 1 * HOURS; | |
| pub const RelaySessionDuration: BlockNumber = 1 * RC_HOURS; |
Or some renamed import to distinguish please.
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
ggwpez
reviewed
Sep 5, 2025
| for InitiateStakingAsync<EXPECTED_SPEC> | ||
| { | ||
| fn on_runtime_upgrade() -> Weight { | ||
| if crate::VERSION.spec_version == EXPECTED_SPEC { |
Member
There was a problem hiding this comment.
These spec migrations have gone wrong so many time 🙈, would be happy if we can avoid it.
ggwpez
reviewed
Sep 5, 2025
ggwpez
reviewed
Sep 5, 2025
| let minimum_score = sp_npos_elections::ElectionScore { | ||
| minimal_stake: 2957640724907066, | ||
| sum_stake: 3471819933857856584, | ||
| sum_stake_squared: 78133097080615021100202963085417458, |
Member
There was a problem hiding this comment.
So this value should be larger than recent election sum_stake_squared? Recent election event here https://kusama.subscan.io/event/29967817-0 looks like about 2^115.7, whereas the value here is 2^115.9.
Just asking since i thought this should be a lower bound.
Contributor
Author
There was a problem hiding this comment.
Correct, this value should be larger. The reason being that the lower this value, the better the election is (smaller variance). So the the "lower bound (aka. worst bound)" in this case is a larger value.
ggwpez
reviewed
Sep 5, 2025
| use super::*; | ||
|
|
||
| // TODO: @kianenigma | ||
| mod message_sizes { |
muharem
reviewed
Sep 5, 2025
| let params = relay_common::EraPayoutParams { | ||
| total_staked, | ||
| total_stakable: 0, // TODO: double check | ||
| total_stakable: Balances::total_issuance(), |
Contributor
There was a problem hiding this comment.
this used to be Nis total issuance
Contributor
Author
There was a problem hiding this comment.
correct, and NIS is not part of KAH anymore. Balances TI is the right alternative, and what we have been using in Polkadot all the while.
…' into kiz-staking-ahm-kusama
|
Command "bench --runtime asset-hub-kusama --pallet pallet_election_provider_multi_block pallet_election_provider_multi_block_signed pallet_election_provider_multi_block_unsigned pallet_election_provider_multi_block_verifier pallet_staking_async --clean" has failed ❌! See logs here |
Member
|
We should benchmark on top of this #856 |
ggwpez
merged commit 71ace0f
into
oty-dev-asset-hub-migration-2506
45 of 46 checks passed
Contributor
1 task
kianenigma
added a commit
that referenced
this pull request
Sep 10, 2025
Follow up to #883, addressing some review comments. - Inflation -> Issuance rename - More use of parameters pallet for scheduler, MQ, and staking elections - Migration to initialize staking-async is not reliant on spec version --------- Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
fellowship-merge-bot bot
added a commit
that referenced
this pull request
Sep 24, 2025
A high-level look of the migration is this: <img width="1204" height="745" alt="Screenshot 2025-09-17 at 18 23 57" src="https://github.com/user-attachments/assets/1fb39ef8-5efa-4db2-81db-6dd775af3a39" /> You can see the main components being the `pallet_rc_migrator` and `pallet_ah_migrator`. The RC migrator pallet takes data out of the RC storage and enqueues it for AH through XCM::Transact calls to the AH migrator pallet. Each pallet on the RC side has a migrator module that handles the removal of the old data and creation of the messages for AH. AH then processes these messages through the MQ pallet and acknowledges back to RC that they were processed (not shown in the graphic). There is rate-limiting code in place to prevent it from overloading the DMP queue or Asset Hub. ## For Reviewers The review comments are being addressed in #915. We need eyes on the Core part that is described below. ## Core STM The main stage transitions look like this. The only manual part is the scheduling call by the fellowship that kicks off the procedure: * `Pending` wait for Fellowship to call `schedule_migration(when)` -> Scheduled * `Scheduled` waiting for scheduled block -> `WaitingForAH` * `WaitingForAH` AH replies that it is ready -> `WarmUp` * `WarmUp` waiting for warm-up end -> `Starting` * `Starting` doing some startup initialization -> `DataMigration` * `DataMigration` MAIN PART **all pallet migrations finish** -> `CoolOff` * `CoolOff` waiting for cool-off to end -> `SignalMigrationFinish` * `SignalMigrationFinish` send signal to AH that we are done -> `MigrationDone` * `MigrationDone` finished, unlock all Pallets. ### State Machine The core State Machine lives in the `RcMigrator` pallet in its `on_initialize`: https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L1338-L1342 On each block the Rc Migrator checks the current state and possibly progresses to the next one. It will only do a single state transition per block to reduce complexity of the code. Generally, there are three states per pallet (called [*stages*](https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L190-L389) in the code). Some pallets have more then three, but it is generally still a multiple of three and always follows the pattern of `PalletInit`, `PalletOngoing { cursor }`, `PalletDone`: https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L239-L244 Each pallet then has one migrator struct (eg. `MultisigMigrator<T>`) that migrates the storage items from the Relay side. It lives in the module of its name `rc-migrator/src/multisig.rs` respectively. Taking Multisigs as an example; you can find two functions in the migrator struct: `migrate_many` and `migrate_single`. The former one is from the [`PalletMigration` trait](https://github.com/polkadot-fellows/runtimes/blob/715dbb4455a127066d0118ce7a096c72200e1126/pallets/rc-migrator/src/types.rs#L209-L221). The `migrate_single` function is done by convention to keep the code readable. The `migrate_many` does the following: - Weight accounting for the RC side: Normal weight tracking to not have overtime RC blocks - Weight accounting for the AH side: Ensuring to not send messages that would take up too much weight on AH processing - Ensure that DMP messages are sensibly sized by using the `XcmBatchAndMeter` - Taking the data out from the Relay chain (deleting it) - Including the data into a DMP message and sending it towards AH ### AH Side The main logic on Asset Hub lives in the `AhMigrator` pallet. It contains at least one extrinsic per pallet to receive the incoming data from the RC. We are using extrinsics since RC is wrapping the data into XCM::Transacts: https://github.com/polkadot-fellows/runtimes/blob/9a20b12e22b019c1c0b15b9af897567a559e424c/pallets/ah-migrator/src/lib.rs#L650-L653 This calls into the [`multisig` module](https://github.com/polkadot-fellows/runtimes/blob/6b603ca47e5c49b3a898be3f8f6b078c424f42a0/pallets/ah-migrator/src/multisig.rs#L37) to integrate the data into the storage. Per convention we are emitting events for each item and the whole batch. The main task of the AH side is to integrate the data. In the example of the multisig it is special since we do not migrate the multisig, but only the reserved account which will be unreserved on AH. ## Messaging Logic The messaging is ACK based. The Relay sends message to Asset Hub up to a specified limit (50). The limit can be adjusted on the fly through a dedicated dispatchable call, restricted to Admin and Manager roles. The limit may be overstepped by the configured batch-size (10), so in total there should never be more than 60 DMPs queued. Each DMP is set to at most [50KB](https://github.com/polkadot-fellows/runtimes/blob/8ef1cc739d756b109dc93eaf3b9da00e3dcf1383/pallets/rc-migrator/src/lib.rs#L131). The Relay Chain migrator creates a query for each XCM data message using the XCM query–response primitives and attaches a response status request from Asset Hub to the message. The XCM executor on Asset Hub then sends back the response status for every message with such a request. The Relay migrator stores each data message sent to Asset Hub until it receives confirmation of successful processing. It also provides a dispatchable call, available only to Admin and Manager roles, to resend any unconfirmed messages. A bug that prevented certain messages from being accounted for during a particulat pallet migration caused the Westend AHM stall. The system was queuing too many DMPs, which forced WAH to author an overweight block while attempting to process them all at once. ## Call Filtering Pallet calls are filtered during the migration for three reasons: - prevent malicious users from spamming the chain with cheap TX and slowing down the migration - prevent users from sending many UMPs out of AH to clog up the UMP queue - prevent interference with pallets that are being migrated to avoid messing up their storage invariants Both RC and AH provide call filters for `Before`, `During` and `After` the migration. As you can see, most things are disabled during the migration on both chains. After the migration, Relay chain keeps pretty much everything disabled since it was now enabled on AH: - Before: RC everything enabled, AH all new pallets disabled (staking, gov etc) - During: RC mostly everything disabled, AH mostly everything disabled - After: RC mostly everything disabled (staking, gov etc), AH everything enabled (staking, gov etc) This is implemented by returning three bools, one for each phase: https://github.com/polkadot-fellows/runtimes/blob/88f4aaf62236fbee9cfb9183e44333bac45b1371/system-parachains/asset-hubs/asset-hub-polkadot/src/ah_migration/call_filter.rs#L81-L83 ## Testing and Dry-Runs https://github.com/paritytech/ahm-dryrun is the repository for testing infrastructure for AHM. As of now, the following is being tested there (as a part of "[AHM Flow (all steps)](https://github.com/paritytech/ahm-dryrun/actions/workflows/zombie-bite.yml)" nightly action): * Dry-running a migration on a fork of Kusama * Re-running the rust unit tests introduced in this branch * Re-running a subset of the same tests, re-written in TS * Re-running PET tests. Each action produces a table with the summary of the test results: <img width="682" height="357" alt="Screenshot 2025-09-19 at 09 03 20" src="https://github.com/user-attachments/assets/69c1e37d-6f8f-4b57-b97f-75781a1e1a3a" /> And 4 snapshot files (2 real databases, 2 try-runtime snapshots) which can be used to re-run any of the tests, or run the pre/post migration chain, locally. <img width="1347" height="476" alt="Screenshot 2025-09-19 at 09 03 40" src="https://github.com/user-attachments/assets/127cbf76-b2fb-467f-8fef-3e93a9a709f6" /> <details><summary>Full Changelog</summary> <p> - **[AHM] OpenGov for Kusama AH (#877)** - **Relay Chain Accounts to Asset Hub Migration (#515)** - **Test Relay<->AH migration through DMP messages (#528)** - **[AHM] Improve account migration (#532)** - **[AHM] Add multisig migration (#534)** - **[AHM] Proxy migration (#542)** - **[AHM] Cleanup and add Preimage doc (#543)** - **[AHM] Improve accounts migration (#550)** - **[AHM] Preimage migration (#545)** - **[AHM] Add Polkadot call filtering (#559)** - **[AHM] Nomination pools (#562)** - **[AHM] referenda pallet (#558)** - **[AHM] Cleanup (#565)** - **[AHM] Scheduler Pallet (#569)** - **[AHM] Fast unstake and Bags list (#563)** - **[AHM] Pallet claims (#570)** - **[AHM] Conviction Voting Pallet (#578)** - **[AHM] Pallet Indices (#577)** - **[AHM] pause scheduler during migration (#580)** - **[AHM] Asset rate pallet migration (#581)** - **[AHM] Bounties data migration (#585)** - **[AHM] Vesting (#575)** - **[AHM] fix the rc-migrator call filter (#598)** - **[AHM] Sovereign Account Translation (#594)** - **[AHM] Crowdloans (#592)** - **[AHM] Set up AH migration testing framework for single pallets (#597)** - **[AHM] Stage management (#584)** - **[AHM] Do not pause inherents 🙈 (#609)** - **[AHM] Relay Chain accounts' reserves (#602)** - **[AHM] Benchmarks (#589)** - **[AHM] Pallet testing framework (#612)** - **[AHM] fix xcm weight at most (#617)** - **[AHM] Improve weight accounting for accounts migration (#618)** - **[AHM] AH acks messages from RC (#620)** - **[AHM] Pure Proxy Investigation (#621)** - **[AHM] Remove migrated items for pallet preimage and improve testing (#619)** - **[AHM] Referenda metadata (#633)** - **[AHM] Fix accounts migration failures (#628)** - **[AHM] refactor events and enable scheduled migration start (#634)** - **[AHM] Migrating DOT total issuance tracking from RC to AH (#607)** - **[AHM] Comment faulty checks out (#640)** - **Account migrator refactor (#639)** - **[AHM] Rebase (#641)** - **[AHM] Run AHM test in CI (#642)** - **[AHM] Vesting test (#615)** - **[AHM] bags_list and conviction_voting tests (#632)** - **[AHM] Treasury pallet migration (#624)** - **[AHM] Fix tests for pallet preimage (#643)** - **[AHM] Test Coverage Report (#650)** - **[AHM] deactivate/reactivate total issuance & weights (#648)** - **[AHM] add sudo behind feature flag (#657)** - **[AHM] fast_unstake tests (#658)** - **[AHM] asset_rate test (#660)** - **[AHM] Pallet treasury tests (#664)** - **[AHM] Improve account balances integration tests (#655)** - **[AHM] Integrate AH migrator weights to RC (#665)** - **Testing for bounties migration (#669)** - **[AHM] Westend port adapters (#652)** - **[AHM] fix checking account and total issuance migration (#636)** - **[AHM] Bump polkadot relay and AH versions (#667)** - **[AHM] Fix tests for pallet treasury (#671)** - **[AHM] Claims and Crowdloan tests (#622)** - **[AHM] Benchmarks (#663)** - **[AHM] Add Asset Hub CallFilter (#670)** - **[AHM] Westend staking migration (#689)** - **[AHM] Referenda migration storage checks (#672)** - **[AHM] AH benchmarks cleanup (#690)** - **[AHM] Westend Async Staking Migration (#691)** - **[AHM] Relay Chain migrator benchmarks (#692)** - **[AHM] Asset Hub ops pallet benchmarks (#693)** - **[AHM] Xcm send weights and Batch helper types (#694)** - **Finish staking Westend (#695)** - **[AHM] Account provider/consumer references (#702)** - **[AHM] Fix westend builds (#704)** - **[AHM] Generate weights (#706)** - **[AHM] Proxy fixes and more tests (#707)** - **[AHM] Docs and simpler events (#699)** - **[AHM] Test call decoding (#710)** - **[AHM] Emulated test for migration with async backing (#717)** - **[AHM] Increase test coverage (#720)** - **[AHM] Add referenda checks to Westend migration (#713)** - **[AHM] Nom_pools test (#677)** - **[AHM] Scheduler storage item checks (#680)** - **[AHM] Update Polkadot Snapshot (#725)** - **[AHM] Pallet multisig tests (#666)** - **[AHM] Adapt XCM configuration to account for changes before and after migration (#722)** - **[AHM] document checking account migration (#716)** - **[AHM] Dependency fixes for integration tests and the Polkadot runtime (#751)** - **[AHM] Remove empty conviction voting filter (#750)** - **[AHM] Missing TODOs and `AccountState` type update (#742)** - **[AHM] DMP prioritization on AH (#772)** - **[AHM] Disable #[pallet::hooks] for migrating pallets during migration (#784)** - **[AHM] AH messages prioritization on RC (#787)** - **[AHM] Cache test snapshots and include more tests into CI job (#788)** - **[AHM] Cleanup Westend feature (#789)** - **[AHM] Introducing the Cool-Off stage (#786)** - **[AHM] Flow Control System (#780)** - **[AHM] Migrate pallet delegated-staking to AH (#791)** - **[AHM] Merge master into dev branch (#793)** - **[AHM] Disable indirect XCMs from RC to AH and vice versa during migration (#774)** - **Rebase** - **bring back RelayTreasuryLocation to make old tests compiole** - **[AHM] Missing `RootLocation` for WaivedLocation for AHP (#798)** - **[AHM] Missing `SecretaryEntities` for AHP (#797)** - **[AHM] Migration idempotency (#808)** - **[AHM] Block number providers for migrating pallets (#809)** - **[AHM] Copy latest ah-ops pallet from the SDK (#810)** - **[AHM / ah-migrator]: Implement RC->AH account translation `mocked` migration across all involved pallets (#807)** - **[AHM] Complete account balances tests (#674)** - **[AHM] Address TODOs (#815)** - **[AHM] Async staking config (#812)** - **[AHM] Optional migration manager account id (#818)** - **[AHM] Type safe Hold and Freeze-Reason translation (#819)** - **[AHM] Create new response query on resend and tests (#816)** - **PolkadotAssetHub: Enable Async Backing (#763)** - **Ensure no era planned when migration starts (#728)** - **[AHM] with async backing (#822)** - **[AHM] Staking migration (#821)** - **identify with only validator account** - **[AHM] Tests work for Paseo (#827)** - **[AHM] Child bounties (#613)** - **[AHM] Cleanup and linter fixes (#828)** - **[AHM] Fix snowbridge test - wrong import of `RelayTreasuryPalletAccount` (instead of AH, it should be BH) (#831)** - **[AHM] Account Translation mapping (#829)** - **Fast unstake: remove alias** - **fmt** - **[AHM] Max migrated items per block (#834)** - **[AHM] Record migration timings (#835)** - **[AHM] Remove storage aliases and cleanup (#832)** - **[AHM] fix Kusama bags list pallet benchmarks (#836)** - **[AHM] Unprocessed msg buffer size 50 (#839)** - **[AHM] Post migration cool off stage (#841)** - **[AHM] Multisig test and storage_alias cleanup (#842)** - **[AHM] Remove fast-unstake and test fixes (#846)** - **Run try-state check for all pallets post AHM rust tests (#833)** - **[AHM] Preserve on RC manager' account (#843)** - **[AHM] Filter staking calls before migration starts (#847)** - **[AHM] State Decode Tests (#848)** - **[AHM] Send xcm extrinsic within migrator pallets (#851)** - **Merge and cleanup merge commit** - #845 - #852 - #862 - #875 - #872 - #877 - #626 - #879 - #885 - #886 - #882 - #883 - #854 - #888 - #895 - #892 - #896 - #889 </p> </details> // only to let all CIs to execute for now - [ ] Does not require a CHANGELOG entry --------- Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io> Signed-off-by: Adrian Catangiu <adrian@parity.io> Signed-off-by: Andrei Sandu <andrei-mihail@parity.io> Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io> Co-authored-by: Muharem <ismailov.m.h@gmail.com> Co-authored-by: Dónal Murray <donalm@seadanda.dev> Co-authored-by: Adrian Catangiu <adrian@parity.io> Co-authored-by: Giuseppe Re <giuseppe.re@parity.io> Co-authored-by: Andrii <ndk@parity.io> Co-authored-by: Bastian Köcher <git@kchr.de> Co-authored-by: Yuri Volkov <0@mcornholio.ru> Co-authored-by: s0me0ne-unkn0wn <48632512+s0me0ne-unkn0wn@users.noreply.github.com> Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com> Co-authored-by: Branislav Kontur <bkontur@gmail.com> Co-authored-by: GitHub Action <action@github.com> Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com> Co-authored-by: fellowship-merge-bot[bot] <151052383+fellowship-merge-bot[bot]@users.noreply.github.com> Co-authored-by: Pablo Andrés Dorado Suárez <hola@pablodorado.com> Co-authored-by: ordian <write@reusable.software> Co-authored-by: Alistair Singh <alistair.singh7@gmail.com> Co-authored-by: Sergej Sakac <73715684+Szegoo@users.noreply.github.com> Co-authored-by: Bastian Köcher <info@kchr.de> Co-authored-by: Serban Iorga <serban@parity.io> Co-authored-by: Xiliang Chen <xlchen1291@gmail.com> Co-authored-by: Nikolai Kozlov <1431590+nkpar@users.noreply.github.com> Co-authored-by: nkprt <nikolai@parity.io> Co-authored-by: Eugenio Paluello <eugypalu@gmail.com> Co-authored-by: Javier Viola <363911+pepoviola@users.noreply.github.com> Co-authored-by: polka.dom <polkadotdom@gmail.com> Co-authored-by: Dónal Murray <donal.murray@parity.io> Co-authored-by: Karol Kokoszka <karol.k91@gmail.com> Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com> Co-authored-by: Clara van Staden <claravanstaden64@gmail.com> Co-authored-by: Ankan <10196091+Ank4n@users.noreply.github.com> Co-authored-by: clangenb <37865735+clangenb@users.noreply.github.com> Co-authored-by: Andrei Sandu <andrei-mihail@parity.io> Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com> Co-authored-by: Alexandre Baldé <alexandre.balde@parity.io> Co-authored-by: Maksym H <1177472+mordamax@users.noreply.github.com> Co-authored-by: Alin Dima <alin@parity.io> Co-authored-by: Alexander Theißen <alex.theissen@me.com> Co-authored-by: Christian Langenbacher <clangenb+gh@protonmail.ch> Co-authored-by: Ankan <ankan.anurag@gmail.com> Co-authored-by: Karol Kokoszka <karol@parity.io> Co-authored-by: brenzi <brenzi@users.noreply.github.com> Co-authored-by: Doordashcon <jesse.chejieh@gmail.com> Co-authored-by: eskimor <eskimor@users.noreply.github.com> Co-authored-by: Robert <robert@gonimo.com> Co-authored-by: Raymond Cheung <178801527+raymondkfcheung@users.noreply.github.com> Co-authored-by: Maciej <kz_sky@outlook.com> Co-authored-by: Paolo La Camera <paolo.lacamera@pm.me> Co-authored-by: kianenigma <kian@parity.io> Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com> Co-authored-by: Alexander Cyon <Sajjon@users.noreply.github.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.