机型适配请求 YSKJ-RK3399

[zakuwaki]

型号：ZYSJ-RK3399
存储：4G + 32G
板型图：

UBOOT
https://github.com/cm9vdA/build-linux/blob/master/u-boot/rockchip/u-boot-2023.01/yskj-rk3399_defconfig

dtsi
https://github.com/cm9vdA/build-linux/blob/master/boot/dts/rockchip/mainline/rk3399-yskj-u-boot.dtsi

dts
https://github.com/cm9vdA/build-linux/blob/master/boot/dts/rockchip/mainline/rk3399-yskj.dts

dtb
https://github.com/cm9vdA/build-linux/tree/master/boot/dts/rockchip/bsp

env
https://github.com/cm9vdA/build-linux/tree/master/env

[ophub]

我添加到编译列表了，你到releases里下载测试下，最新的11月的tags里，反馈下结果。
dts在6.1.y和6.6.y里测试都可以正常编译。

[zakuwaki]

可以正常启动，测试一切正常！谢谢大佬，感恩的心

内核启动日志

Details

root@armbian:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.1.119-ophub (root@fv-az1153-138) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 13.3.1 20240614, GNU ld (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 2.42.0.20240614) #1 SMP Tue Nov 26 23:07:35 EST 2024
[    0.000000] Machine model: RK3399 YSKJ Board
[    0.000000] efi: UEFI not found.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 256 MiB at 0x00000000e1000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 29 pages/cpu s78184 r8192 d32408 u118784
[    0.000000] pcpu-alloc: s78184 r8192 d32408 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: root=UUID=5f3d4c39-9ae6-4758-b1a2-1c30c2a4b13b rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=85b8ac7f-ed99-4fd8-aeb2-fa3760df55ad usb-storage.quirks=  net.ifnames=0 max_loop=128 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=85b8ac7f-ed99-4fd8-aeb2-fa3760df55ad cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3670264K/4061184K available (18368K kernel code, 3942K rwdata, 15548K rodata, 6016K init, 923K bss, 128776K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000004f0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000580000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002148] Console: colour dummy device 80x25
[    0.002219] printk: console [tty1] enabled
[    0.002277] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002296] pid_max: default: 32768 minimum: 301
[    0.002711] LSM: Security Framework initializing
[    0.002824] SELinux:  Initializing.
[    0.003361] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.003395] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005638] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.006650] cblist_init_generic: Setting adjustable number of callback queues.
[    0.006660] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.006950] rcu: Hierarchical SRCU implementation.
[    0.006957] rcu: 	Max phase no-delay instances is 1000.
[    0.009057] Platform MSI: msi-controller@fee20000 domain created
[    0.009526] PCI/MSI: /interrupt-controller@fee00000/msi-controller@fee20000 domain created
[    0.010296] EFI services will not be available.
[    0.010975] smp: Bringing up secondary CPUs ...
[    0.011924] Detected VIPT I-cache on CPU1
[    0.012090] cacheinfo: Unable to detect cache hierarchy for CPU 1
[    0.012110] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.012133] GICv3: CPU1: using allocated LPI pending table @0x0000000000590000
[    0.012189] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013262] Detected VIPT I-cache on CPU2
[    0.013430] cacheinfo: Unable to detect cache hierarchy for CPU 2
[    0.013450] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.013473] GICv3: CPU2: using allocated LPI pending table @0x00000000005a0000
[    0.013528] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.014663] Detected VIPT I-cache on CPU3
[    0.014836] cacheinfo: Unable to detect cache hierarchy for CPU 3
[    0.014857] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.014879] GICv3: CPU3: using allocated LPI pending table @0x00000000005b0000
[    0.014932] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.016086] CPU features: detected: Spectre-v2
[    0.016097] CPU features: detected: Spectre-v4
[    0.016103] CPU features: detected: Spectre-BHB
[    0.016110] CPU features: detected: ARM erratum 1742098
[    0.016117] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.016123] Detected PIPT I-cache on CPU4
[    0.016236] cacheinfo: Unable to detect cache hierarchy for CPU 4
[    0.016251] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.016269] GICv3: CPU4: using allocated LPI pending table @0x00000000005c0000
[    0.016308] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.017355] Detected PIPT I-cache on CPU5
[    0.017478] cacheinfo: Unable to detect cache hierarchy for CPU 5
[    0.017494] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.017512] GICv3: CPU5: using allocated LPI pending table @0x00000000005d0000
[    0.017551] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.017663] smp: Brought up 1 node, 6 CPUs
[    0.017701] SMP: Total of 6 processors activated.
[    0.017709] CPU features: detected: 32-bit EL0 Support
[    0.017716] CPU features: detected: 32-bit EL1 Support
[    0.017724] CPU features: detected: CRC32 instructions
[    0.017844] CPU: All CPU(s) started at EL2
[    0.017860] alternatives: applying system-wide alternatives
[    0.021826] devtmpfs: initialized
[    0.037925] Registered cp15_barrier emulation handler
[    0.037945] Registered setend emulation handler
[    0.038100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.038120] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.043414] prandom: seed boundary self test passed
[    0.045246] prandom: 100 self tests passed
[    0.045293] pinctrl core: initialized pinctrl subsystem
[    0.045870] DMI not present or invalid.
[    0.046449] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.048334] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.049209] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.049850] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.049905] audit: initializing netlink subsys (disabled)
[    0.050130] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
[    0.051371] thermal_sys: Registered thermal governor 'step_wise'
[    0.051424] cpuidle: using governor ladder
[    0.051635] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.051814] ASID allocator initialised with 65536 entries
[    0.051927] Serial: AMBA PL011 UART driver
[    0.071229] platform ff770000.syscon:usb2phy@e450: Fixed dependency cycle(s) with /i2c@ff3d0000/fusb30x@22/connector
[    0.071666] platform fe330000.mmc: Fixed dependency cycle(s) with /syscon@ff770000/phy@f780
[    0.071747] platform ff770000.syscon:phy@f780: Fixed dependency cycle(s) with /mmc@fe330000
[    0.072099] platform ff7c0000.phy: Fixed dependency cycle(s) with /i2c@ff3d0000/fusb30x@22/connector
[    0.073510] platform fec00000.dp: Fixed dependency cycle(s) with /vop@ff8f0000
[    0.073605] platform ff8f0000.vop: Fixed dependency cycle(s) with /dp@fec00000
[    0.074424] platform fec00000.dp: Fixed dependency cycle(s) with /vop@ff900000
[    0.074519] platform ff900000.vop: Fixed dependency cycle(s) with /dp@fec00000
[    0.075972] platform ff900000.vop: Fixed dependency cycle(s) with /hdmi@ff940000
[    0.076068] platform ff8f0000.vop: Fixed dependency cycle(s) with /hdmi@ff940000
[    0.076155] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff8f0000
[    0.076256] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff900000
[    0.083290] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[    0.084002] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[    0.084554] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[    0.085205] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[    0.085770] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[    0.100785] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.100797] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.100806] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.100812] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.100820] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.100825] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.100833] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.100838] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.102073] cryptd: max_cpu_qlen set to 1000
[    0.167948] raid6: neonx8   gen()  1814 MB/s
[    0.236056] raid6: neonx4   gen()  1772 MB/s
[    0.304170] raid6: neonx2   gen()  1464 MB/s
[    0.372286] raid6: neonx1   gen()  1049 MB/s
[    0.440414] raid6: int64x8  gen()  1014 MB/s
[    0.508516] raid6: int64x4  gen()   989 MB/s
[    0.576623] raid6: int64x2  gen()   960 MB/s
[    0.644739] raid6: int64x1  gen()   711 MB/s
[    0.644745] raid6: using algorithm neonx8 gen() 1814 MB/s
[    0.712853] raid6: .... xor() 1265 MB/s, rmw enabled
[    0.712859] raid6: using neon recovery algorithm
[    0.713078] ACPI: Interpreter disabled.
[    0.716396] iommu: Default domain type: Translated
[    0.716407] iommu: DMA domain TLB invalidation policy: strict mode
[    0.716893] SCSI subsystem initialized
[    0.717088] libata version 3.00 loaded.
[    0.717319] usbcore: registered new interface driver usbfs
[    0.717374] usbcore: registered new interface driver hub
[    0.717409] usbcore: registered new device driver usb
[    0.717947] mc: Linux media interface: v0.10
[    0.718022] videodev: Linux video capture interface: v2.00
[    0.718313] EDAC MC: Ver: 3.0.0
[    0.719426] Advanced Linux Sound Architecture Driver Initialized.
[    0.720272] vgaarb: loaded
[    0.720697] clocksource: Switched to clocksource arch_sys_counter
[    0.721304] VFS: Disk quotas dquot_6.6.0
[    0.721389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.721534] FS-Cache: Loaded
[    0.721794] pnp: PnP ACPI: disabled
[    0.732396] NET: Registered PF_INET protocol family
[    0.732723] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.737583] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.737651] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.737711] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.738081] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.739385] TCP: Hash tables configured (established 32768 bind 32768)
[    0.739698] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.739867] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.740006] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.740421] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.740459] NET: Registered PF_XDP protocol family
[    0.740471] PCI: CLS 0 bytes, default 64
[    0.741115] Trying to unpack rootfs image as initramfs...
[    0.750114] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.750826] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.751553] kvm [1]: IPA Size Limit: 40 bits
[    0.754586] kvm [1]: vgic-v2@fff20000
[    0.754632] kvm [1]: GIC system register CPU interface enabled
[    0.754859] kvm [1]: vgic interrupt IRQ18
[    0.755096] kvm [1]: Hyp mode initialized successfully
[    0.757772] Initialise system trusted keyrings
[    0.757996] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.765617] zbud: loaded
[    0.767747] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.768364] fuse: init (API version 7.38)
[    0.769056] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    0.837893] NET: Registered PF_ALG protocol family
[    0.837936] xor: measuring software checksum speed
[    0.839072]    8regs           :  2901 MB/sec
[    0.840128]    32regs          :  3135 MB/sec
[    0.841417]    arm64_neon      :  2559 MB/sec
[    0.841424] xor: using function: 32regs (3135 MB/sec)
[    0.841440] Key type asymmetric registered
[    0.841446] Asymmetric key parser 'x509' registered
[    0.841546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.841715] io scheduler mq-deadline registered
[    0.841723] io scheduler kyber registered
[    0.841904] io scheduler bfq registered
[    0.935736] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.935754] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.937235] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.937248] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.941473] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[    0.943698] printk: console [ttyS2] disabled
[    0.943766] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
[    0.944128] printk: console [ttyS2] enabled
[    0.945280] Serial: AMBA driver
[    0.950807] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[    0.951606] rockchip-vop ff900000.vop: Adding to iommu group 3
[    0.959818] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.962555] brd: module loaded
[    1.042238] loop: module loaded
[    1.048485] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[    1.048502] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[    1.048661] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    1.048942] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.048955] rk_gmac-dwmac fe300000.ethernet: TX delay(0x35).
[    1.048966] rk_gmac-dwmac fe300000.ethernet: RX delay(0x29).
[    1.048986] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.049034] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.054053] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.054270] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    1.054285] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[    1.054294] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    1.054302] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    1.054309] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    1.054318] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    1.054325] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    1.054332] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    1.054340] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    1.054347] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.810949] Freeing initrd memory: 12872K
[    6.942487] usbcore: registered new interface driver cdc_wdm
[    6.942540] usbcore: registered new interface driver usb-storage
[    6.942625] usbcore: registered new interface driver usbserial_generic
[    6.942649] usbserial: USB Serial support registered for generic
[    6.942683] usbcore: registered new interface driver ch341
[    6.942717] usbserial: USB Serial support registered for ch341-uart
[    6.942749] usbcore: registered new interface driver cp210x
[    6.942770] usbserial: USB Serial support registered for cp210x
[    6.942799] usbcore: registered new interface driver ftdi_sio
[    6.942819] usbserial: USB Serial support registered for FTDI USB Serial Device
[    6.942850] usbcore: registered new interface driver garmin_gps
[    6.942870] usbserial: USB Serial support registered for Garmin GPS usb/tty
[    6.942913] usbcore: registered new interface driver ipw
[    6.942933] usbserial: USB Serial support registered for IPWireless converter
[    6.942979] usbcore: registered new interface driver opticon
[    6.943000] usbserial: USB Serial support registered for opticon
[    6.943032] usbcore: registered new interface driver pl2303
[    6.943051] usbserial: USB Serial support registered for pl2303
[    6.943081] usbcore: registered new interface driver qcaux
[    6.943101] usbserial: USB Serial support registered for qcaux
[    6.943130] usbcore: registered new interface driver qcserial
[    6.943151] usbserial: USB Serial support registered for Qualcomm USB modem
[    6.943182] usbcore: registered new interface driver symbolserial
[    6.943216] usbserial: USB Serial support registered for symbol
[    6.943840] mousedev: PS/2 mouse device common for all mice
[    6.944495] ehci-platform fe3c0000.usb: EHCI Host Controller
[    6.944720] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    6.944842] ehci-platform fe3c0000.usb: irq 47, io mem 0xfe3c0000
[    6.945040] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[    6.945786] i2c_dev: i2c /dev entries driver
[    6.947849] i2c 0-001b: Fixed dependency cycle(s) with /i2c@ff3c0000/pmic@1b/regulators/LDO_REG8
[    6.948589] rk808 0-001b: chip id: 0x0
[    6.952890] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    6.952922] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    6.964709] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    6.964856] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    6.964917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    6.964933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.964944] usb usb1: Product: EHCI Host Controller
[    6.964952] usb usb1: Manufacturer: Linux 6.1.119-ophub ehci_hcd
[    6.964961] usb usb1: SerialNumber: fe3c0000.usb
[    6.965520] hub 1-0:1.0: USB hub found
[    6.965555] hub 1-0:1.0: 1 port detected
[    6.967122] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    6.978307] cpu cpu0: EM: created perf domain
[    6.979529] cpu cpu4: EM: OPP:408000 is inefficient
[    6.979852] cpu cpu4: EM: created perf domain
[    6.982114] sdhci: Secure Digital Host Controller Interface driver
[    6.982120] sdhci: Copyright(c) Pierre Ossman
[    6.982123] Synopsys Designware Multimedia Card Interface Driver
[    6.982666] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.983618] ledtrig-cpu: registered to indicate activity on CPUs
[    6.984765] hid: raw HID events driver (C) Jiri Kosina
[    6.984823] usbcore: registered new interface driver usbhid
[    6.984827] usbhid: USB HID core driver
[    7.033682] Initializing XFRM netlink socket
[    7.034078] NET: Registered PF_INET6 protocol family
[    7.085067] Segment Routing with IPv6
[    7.085085] RPL Segment Routing with IPv6
[    7.085180] In-situ OAM (IOAM) with IPv6
[    7.085414] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    7.087134] NET: Registered PF_PACKET protocol family
[    7.087163] NET: Registered PF_KEY protocol family
[    7.087540] 8021q: 802.1Q VLAN Support v1.8
[    7.088843] registered taskstats version 1
[    7.088892] Loading compiled-in X.509 certificates
[    7.095317] zswap: loaded using pool zstd/zbud
[    7.096269] Key type .fscrypt registered
[    7.096276] Key type fscrypt-provisioning registered
[    7.097249] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    7.362284] alg: No test for 842 (842-scomp)
[    7.362670] alg: No test for 842 (842-generic)
[    7.905125] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    7.905997] clk: Disabling unused clocks
[    7.906997] ALSA device list:
[    7.907010]   No soundcards found.
[    7.909071] Freeing unused kernel memory: 6016K
[    7.909249] Run /init as init process
[    7.909256]   with arguments:
[    7.909262]     /init
[    7.909267]   with environment:
[    7.909271]     HOME=/
[    7.909276]     TERM=linux
[    7.909280]     splash=verbose
[    7.909285]     ubootpart=85b8ac7f-ed99-4fd8-aeb2-fa3760df55ad
[    7.909291]     cgroup_enable=memory
[    7.909296]     cgroup_memory=1
[    7.938523] fbcon: Taking over console
[    8.350158] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    8.350279] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    8.350334] ohci-platform fe3e0000.usb: irq 64, io mem 0xfe3e0000
[    8.375635] OF: graph: no port node found in /i2c@ff3d0000/fusb30x@22
[    8.395659] rk808-rtc rk808-rtc: registered as rtc0
[    8.396351] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:26 UTC (1358499026)
[    8.416884] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[    8.416898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.416905] usb usb2: Product: Generic Platform OHCI controller
[    8.416912] usb usb2: Manufacturer: Linux 6.1.119-ophub ohci_hcd
[    8.416916] usb usb2: SerialNumber: fe3e0000.usb
[    8.428204] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    8.437170] hub 2-0:1.0: USB hub found
[    8.437212] hub 2-0:1.0: 1 port detected
[    8.480910] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    8.481028] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002010010
[    8.481068] xhci-hcd xhci-hcd.1.auto: irq 66, io mem 0xfe900000
[    8.481170] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    8.486898] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    8.486937] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    8.487098] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    8.487110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.487117] usb usb3: Product: xHCI Host Controller
[    8.487124] usb usb3: Manufacturer: Linux 6.1.119-ophub xhci-hcd
[    8.487130] usb usb3: SerialNumber: xhci-hcd.1.auto
[    8.554946] hub 3-0:1.0: USB hub found
[    8.555188] hub 3-0:1.0: 1 port detected
[    8.574029] mmc1: CQHCI version 5.10
[    8.583680] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.583919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    8.583927] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.583931] usb usb4: Product: xHCI Host Controller
[    8.583935] usb usb4: Manufacturer: Linux 6.1.119-ophub xhci-hcd
[    8.583938] usb usb4: SerialNumber: xhci-hcd.1.auto
[    8.588345] hub 4-0:1.0: USB hub found
[    8.588383] hub 4-0:1.0: 1 port detected
[    8.629116] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    8.681057] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[    8.695904] mmc1: Command Queue Engine enabled
[    8.695935] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    8.696729] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB
[    8.699674] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    8.699689] GPT:6324223 != 61071359
[    8.699697] GPT:Alternate GPT header not at the end of the disk.
[    8.699700] GPT:6324223 != 61071359
[    8.699703] GPT: Use GNU Parted to correct GPT errors.
[    8.699728]  mmcblk1: p1 p2
[    8.701158] mmcblk1boot0: mmc1:0001 BJTD4R 4.00 MiB
[    8.702553] mmcblk1boot1: mmc1:0001 BJTD4R 4.00 MiB
[    8.703634] mmcblk1rpmb: mmc1:0001 BJTD4R 4.00 MiB, chardev (240:0)
[    8.945235] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.

[zakuwaki]

另外小白也想请教和学习下添加机型的sop。
目前通过学习仓库下的样例，知道了如何添加机型和dts编译kernel和固件
但现在还卡在u-boot环节有些困惑，比如这个commit里都是二进制文件，不知道是怎么来的，特别是rk3399_loader，感觉网上的介绍非常少

[ophub]

添加内核的方法： unifreq/linux-6.1.y@71866aa
把dts放在源码里，添加编译列表，编译测试，编译方法在仓库里有。
看： https://github.com/ophub/amlogic-s9xxx-armbian/tree/main/compile-kernel
或者看： https://github.com/ophub/kernel

u-boot可以看他们官方的文档。

各家也有一些编译的编译方法，例如你发的仓库里就有编译源文件及方法： https://github.com/cm9vdA/build-linux

rockchip有一些厂家也有专用的仓库和编译方法，例如瑞莎家的仓库： https://wiki.radxa.com/Rockpi4/dev/u-boot

用的仓库的根是一家的，各厂商自己做了一些自适配，并进行了编译简化操作，方便大家简单上手自己编译。

我现在的u-boot仓库是使用上面的方法编译好的可以直接使用的二进制文件。我也想过要不要整理个u-boot源文件仓库，并写个actions或者shell方便大家一键编译，达到像编译armbian/openwrt/kernel一样简单易用。但是我看上面这些厂家和大佬们都介绍的挺明白的了，我在之前的帖子里也使用他们的方法，编译的方法都是他们仓库里写的文档，我照着一步步地操作最终编译好了，我小白都能看懂并编译出来，你多看几遍再实际操作下就能熟练diy了。amlogic有些特别的锁bootloader设备，flippy大佬传授了他的经验，我根据他的方法也制作了可用的u-boot，并把过程截图写入了仓库的文档。

比如我使用cm9vdA的方法的案例： #1380
还有使用瑞莎家的案例：ophub/amlogic-s9xxx-openwrt#415

在一些帖子里我都做了详细的过程介绍，有代码有截图地尽量能把过程和细节都介绍清楚，你看看之前的帖子。

[zakuwaki]

谢谢大佬的授人以渔❤️

[gdanmac]

交换芯片mt7530DU 能驱动起来吗？

[ACCodelover]

可以正常启动，测试一切正常！谢谢大佬，感恩的心

内核启动日志

root@armbian:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.1.119-ophub (root@fv-az1153-138) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 13.3.1 20240614, GNU ld (Arm GNU Toolchain 13.3.Rel1 (Build arm-13.24)) 2.42.0.20240614) #1 SMP Tue Nov 26 23:07:35 EST 2024
[    0.000000] Machine model: RK3399 YSKJ Board
[    0.000000] efi: UEFI not found.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 256 MiB at 0x00000000e1000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 29 pages/cpu s78184 r8192 d32408 u118784
[    0.000000] pcpu-alloc: s78184 r8192 d32408 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: root=UUID=5f3d4c39-9ae6-4758-b1a2-1c30c2a4b13b rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=85b8ac7f-ed99-4fd8-aeb2-fa3760df55ad usb-storage.quirks=  net.ifnames=0 max_loop=128 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=85b8ac7f-ed99-4fd8-aeb2-fa3760df55ad cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3670264K/4061184K available (18368K kernel code, 3942K rwdata, 15548K rodata, 6016K init, 923K bss, 128776K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000004f0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000580000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002148] Console: colour dummy device 80x25
[    0.002219] printk: console [tty1] enabled
[    0.002277] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002296] pid_max: default: 32768 minimum: 301
[    0.002711] LSM: Security Framework initializing
[    0.002824] SELinux:  Initializing.
[    0.003361] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.003395] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.005638] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.006650] cblist_init_generic: Setting adjustable number of callback queues.
[    0.006660] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.006950] rcu: Hierarchical SRCU implementation.
[    0.006957] rcu: 	Max phase no-delay instances is 1000.
[    0.009057] Platform MSI: msi-controller@fee20000 domain created
[    0.009526] PCI/MSI: /interrupt-controller@fee00000/msi-controller@fee20000 domain created
[    0.010296] EFI services will not be available.
[    0.010975] smp: Bringing up secondary CPUs ...
[    0.011924] Detected VIPT I-cache on CPU1
[    0.012090] cacheinfo: Unable to detect cache hierarchy for CPU 1
[    0.012110] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.012133] GICv3: CPU1: using allocated LPI pending table @0x0000000000590000
[    0.012189] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013262] Detected VIPT I-cache on CPU2
[    0.013430] cacheinfo: Unable to detect cache hierarchy for CPU 2
[    0.013450] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.013473] GICv3: CPU2: using allocated LPI pending table @0x00000000005a0000
[    0.013528] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.014663] Detected VIPT I-cache on CPU3
[    0.014836] cacheinfo: Unable to detect cache hierarchy for CPU 3
[    0.014857] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.014879] GICv3: CPU3: using allocated LPI pending table @0x00000000005b0000
[    0.014932] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.016086] CPU features: detected: Spectre-v2
[    0.016097] CPU features: detected: Spectre-v4
[    0.016103] CPU features: detected: Spectre-BHB
[    0.016110] CPU features: detected: ARM erratum 1742098
[    0.016117] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.016123] Detected PIPT I-cache on CPU4
[    0.016236] cacheinfo: Unable to detect cache hierarchy for CPU 4
[    0.016251] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.016269] GICv3: CPU4: using allocated LPI pending table @0x00000000005c0000
[    0.016308] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.017355] Detected PIPT I-cache on CPU5
[    0.017478] cacheinfo: Unable to detect cache hierarchy for CPU 5
[    0.017494] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.017512] GICv3: CPU5: using allocated LPI pending table @0x00000000005d0000
[    0.017551] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.017663] smp: Brought up 1 node, 6 CPUs
[    0.017701] SMP: Total of 6 processors activated.
[    0.017709] CPU features: detected: 32-bit EL0 Support
[    0.017716] CPU features: detected: 32-bit EL1 Support
[    0.017724] CPU features: detected: CRC32 instructions
[    0.017844] CPU: All CPU(s) started at EL2
[    0.017860] alternatives: applying system-wide alternatives
[    0.021826] devtmpfs: initialized
[    0.037925] Registered cp15_barrier emulation handler
[    0.037945] Registered setend emulation handler
[    0.038100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.038120] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.043414] prandom: seed boundary self test passed
[    0.045246] prandom: 100 self tests passed
[    0.045293] pinctrl core: initialized pinctrl subsystem
[    0.045870] DMI not present or invalid.
[    0.046449] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.048334] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.049209] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.049850] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.049905] audit: initializing netlink subsys (disabled)
[    0.050130] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
[    0.051371] thermal_sys: Registered thermal governor 'step_wise'
[    0.051424] cpuidle: using governor ladder
[    0.051635] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.051814] ASID allocator initialised with 65536 entries
[    0.051927] Serial: AMBA PL011 UART driver
[    0.071229] platform ff770000.syscon:usb2phy@e450: Fixed dependency cycle(s) with /i2c@ff3d0000/fusb30x@22/connector
[    0.071666] platform fe330000.mmc: Fixed dependency cycle(s) with /syscon@ff770000/phy@f780
[    0.071747] platform ff770000.syscon:phy@f780: Fixed dependency cycle(s) with /mmc@fe330000
[    0.072099] platform ff7c0000.phy: Fixed dependency cycle(s) with /i2c@ff3d0000/fusb30x@22/connector
[    0.073510] platform fec00000.dp: Fixed dependency cycle(s) with /vop@ff8f0000
[    0.073605] platform ff8f0000.vop: Fixed dependency cycle(s) with /dp@fec00000
[    0.074424] platform fec00000.dp: Fixed dependency cycle(s) with /vop@ff900000
[    0.074519] platform ff900000.vop: Fixed dependency cycle(s) with /dp@fec00000
[    0.075972] platform ff900000.vop: Fixed dependency cycle(s) with /hdmi@ff940000
[    0.076068] platform ff8f0000.vop: Fixed dependency cycle(s) with /hdmi@ff940000
[    0.076155] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff8f0000
[    0.076256] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff900000
[    0.083290] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000
[    0.084002] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000
[    0.084554] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000
[    0.085205] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000
[    0.085770] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000
[    0.100785] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.100797] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.100806] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.100812] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.100820] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.100825] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.100833] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.100838] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.102073] cryptd: max_cpu_qlen set to 1000
[    0.167948] raid6: neonx8   gen()  1814 MB/s
[    0.236056] raid6: neonx4   gen()  1772 MB/s
[    0.304170] raid6: neonx2   gen()  1464 MB/s
[    0.372286] raid6: neonx1   gen()  1049 MB/s
[    0.440414] raid6: int64x8  gen()  1014 MB/s
[    0.508516] raid6: int64x4  gen()   989 MB/s
[    0.576623] raid6: int64x2  gen()   960 MB/s
[    0.644739] raid6: int64x1  gen()   711 MB/s
[    0.644745] raid6: using algorithm neonx8 gen() 1814 MB/s
[    0.712853] raid6: .... xor() 1265 MB/s, rmw enabled
[    0.712859] raid6: using neon recovery algorithm
[    0.713078] ACPI: Interpreter disabled.
[    0.716396] iommu: Default domain type: Translated
[    0.716407] iommu: DMA domain TLB invalidation policy: strict mode
[    0.716893] SCSI subsystem initialized
[    0.717088] libata version 3.00 loaded.
[    0.717319] usbcore: registered new interface driver usbfs
[    0.717374] usbcore: registered new interface driver hub
[    0.717409] usbcore: registered new device driver usb
[    0.717947] mc: Linux media interface: v0.10
[    0.718022] videodev: Linux video capture interface: v2.00
[    0.718313] EDAC MC: Ver: 3.0.0
[    0.719426] Advanced Linux Sound Architecture Driver Initialized.
[    0.720272] vgaarb: loaded
[    0.720697] clocksource: Switched to clocksource arch_sys_counter
[    0.721304] VFS: Disk quotas dquot_6.6.0
[    0.721389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.721534] FS-Cache: Loaded
[    0.721794] pnp: PnP ACPI: disabled
[    0.732396] NET: Registered PF_INET protocol family
[    0.732723] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.737583] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.737651] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.737711] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.738081] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.739385] TCP: Hash tables configured (established 32768 bind 32768)
[    0.739698] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.739867] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.740006] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.740421] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.740459] NET: Registered PF_XDP protocol family
[    0.740471] PCI: CLS 0 bytes, default 64
[    0.741115] Trying to unpack rootfs image as initramfs...
[    0.750114] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.750826] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.751553] kvm [1]: IPA Size Limit: 40 bits
[    0.754586] kvm [1]: vgic-v2@fff20000
[    0.754632] kvm [1]: GIC system register CPU interface enabled
[    0.754859] kvm [1]: vgic interrupt IRQ18
[    0.755096] kvm [1]: Hyp mode initialized successfully
[    0.757772] Initialise system trusted keyrings
[    0.757996] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.765617] zbud: loaded
[    0.767747] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.768364] fuse: init (API version 7.38)
[    0.769056] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    0.837893] NET: Registered PF_ALG protocol family
[    0.837936] xor: measuring software checksum speed
[    0.839072]    8regs           :  2901 MB/sec
[    0.840128]    32regs          :  3135 MB/sec
[    0.841417]    arm64_neon      :  2559 MB/sec
[    0.841424] xor: using function: 32regs (3135 MB/sec)
[    0.841440] Key type asymmetric registered
[    0.841446] Asymmetric key parser 'x509' registered
[    0.841546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.841715] io scheduler mq-deadline registered
[    0.841723] io scheduler kyber registered
[    0.841904] io scheduler bfq registered
[    0.935736] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.935754] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.937235] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.937248] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.941473] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[    0.943698] printk: console [ttyS2] disabled
[    0.943766] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
[    0.944128] printk: console [ttyS2] enabled
[    0.945280] Serial: AMBA driver
[    0.950807] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[    0.951606] rockchip-vop ff900000.vop: Adding to iommu group 3
[    0.959818] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.962555] brd: module loaded
[    1.042238] loop: module loaded
[    1.048485] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[    1.048502] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[    1.048661] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    1.048942] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.048955] rk_gmac-dwmac fe300000.ethernet: TX delay(0x35).
[    1.048966] rk_gmac-dwmac fe300000.ethernet: RX delay(0x29).
[    1.048986] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.049034] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.054053] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.054270] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    1.054285] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[    1.054294] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    1.054302] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    1.054309] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    1.054318] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    1.054325] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    1.054332] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    1.054340] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    1.054347] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.810949] Freeing initrd memory: 12872K
[    6.942487] usbcore: registered new interface driver cdc_wdm
[    6.942540] usbcore: registered new interface driver usb-storage
[    6.942625] usbcore: registered new interface driver usbserial_generic
[    6.942649] usbserial: USB Serial support registered for generic
[    6.942683] usbcore: registered new interface driver ch341
[    6.942717] usbserial: USB Serial support registered for ch341-uart
[    6.942749] usbcore: registered new interface driver cp210x
[    6.942770] usbserial: USB Serial support registered for cp210x
[    6.942799] usbcore: registered new interface driver ftdi_sio
[    6.942819] usbserial: USB Serial support registered for FTDI USB Serial Device
[    6.942850] usbcore: registered new interface driver garmin_gps
[    6.942870] usbserial: USB Serial support registered for Garmin GPS usb/tty
[    6.942913] usbcore: registered new interface driver ipw
[    6.942933] usbserial: USB Serial support registered for IPWireless converter
[    6.942979] usbcore: registered new interface driver opticon
[    6.943000] usbserial: USB Serial support registered for opticon
[    6.943032] usbcore: registered new interface driver pl2303
[    6.943051] usbserial: USB Serial support registered for pl2303
[    6.943081] usbcore: registered new interface driver qcaux
[    6.943101] usbserial: USB Serial support registered for qcaux
[    6.943130] usbcore: registered new interface driver qcserial
[    6.943151] usbserial: USB Serial support registered for Qualcomm USB modem
[    6.943182] usbcore: registered new interface driver symbolserial
[    6.943216] usbserial: USB Serial support registered for symbol
[    6.943840] mousedev: PS/2 mouse device common for all mice
[    6.944495] ehci-platform fe3c0000.usb: EHCI Host Controller
[    6.944720] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    6.944842] ehci-platform fe3c0000.usb: irq 47, io mem 0xfe3c0000
[    6.945040] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[    6.945786] i2c_dev: i2c /dev entries driver
[    6.947849] i2c 0-001b: Fixed dependency cycle(s) with /i2c@ff3c0000/pmic@1b/regulators/LDO_REG8
[    6.948589] rk808 0-001b: chip id: 0x0
[    6.952890] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    6.952922] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    6.964709] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    6.964856] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    6.964917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    6.964933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.964944] usb usb1: Product: EHCI Host Controller
[    6.964952] usb usb1: Manufacturer: Linux 6.1.119-ophub ehci_hcd
[    6.964961] usb usb1: SerialNumber: fe3c0000.usb
[    6.965520] hub 1-0:1.0: USB hub found
[    6.965555] hub 1-0:1.0: 1 port detected
[    6.967122] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    6.978307] cpu cpu0: EM: created perf domain
[    6.979529] cpu cpu4: EM: OPP:408000 is inefficient
[    6.979852] cpu cpu4: EM: created perf domain
[    6.982114] sdhci: Secure Digital Host Controller Interface driver
[    6.982120] sdhci: Copyright(c) Pierre Ossman
[    6.982123] Synopsys Designware Multimedia Card Interface Driver
[    6.982666] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.983618] ledtrig-cpu: registered to indicate activity on CPUs
[    6.984765] hid: raw HID events driver (C) Jiri Kosina
[    6.984823] usbcore: registered new interface driver usbhid
[    6.984827] usbhid: USB HID core driver
[    7.033682] Initializing XFRM netlink socket
[    7.034078] NET: Registered PF_INET6 protocol family
[    7.085067] Segment Routing with IPv6
[    7.085085] RPL Segment Routing with IPv6
[    7.085180] In-situ OAM (IOAM) with IPv6
[    7.085414] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    7.087134] NET: Registered PF_PACKET protocol family
[    7.087163] NET: Registered PF_KEY protocol family
[    7.087540] 8021q: 802.1Q VLAN Support v1.8
[    7.088843] registered taskstats version 1
[    7.088892] Loading compiled-in X.509 certificates
[    7.095317] zswap: loaded using pool zstd/zbud
[    7.096269] Key type .fscrypt registered
[    7.096276] Key type fscrypt-provisioning registered
[    7.097249] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    7.362284] alg: No test for 842 (842-scomp)
[    7.362670] alg: No test for 842 (842-generic)
[    7.905125] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    7.905997] clk: Disabling unused clocks
[    7.906997] ALSA device list:
[    7.907010]   No soundcards found.
[    7.909071] Freeing unused kernel memory: 6016K
[    7.909249] Run /init as init process
[    7.909256]   with arguments:
[    7.909262]     /init
[    7.909267]   with environment:
[    7.909271]     HOME=/
[    7.909276]     TERM=linux
[    7.909280]     splash=verbose
[    7.909285]     ubootpart=85b8ac7f-ed99-4fd8-aeb2-fa3760df55ad
[    7.909291]     cgroup_enable=memory
[    7.909296]     cgroup_memory=1
[    7.938523] fbcon: Taking over console
[    8.350158] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    8.350279] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    8.350334] ohci-platform fe3e0000.usb: irq 64, io mem 0xfe3e0000
[    8.375635] OF: graph: no port node found in /i2c@ff3d0000/fusb30x@22
[    8.395659] rk808-rtc rk808-rtc: registered as rtc0
[    8.396351] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:26 UTC (1358499026)
[    8.416884] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[    8.416898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.416905] usb usb2: Product: Generic Platform OHCI controller
[    8.416912] usb usb2: Manufacturer: Linux 6.1.119-ophub ohci_hcd
[    8.416916] usb usb2: SerialNumber: fe3e0000.usb
[    8.428204] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    8.437170] hub 2-0:1.0: USB hub found
[    8.437212] hub 2-0:1.0: 1 port detected
[    8.480910] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    8.481028] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002010010
[    8.481068] xhci-hcd xhci-hcd.1.auto: irq 66, io mem 0xfe900000
[    8.481170] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    8.486898] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    8.486937] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    8.487098] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    8.487110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.487117] usb usb3: Product: xHCI Host Controller
[    8.487124] usb usb3: Manufacturer: Linux 6.1.119-ophub xhci-hcd
[    8.487130] usb usb3: SerialNumber: xhci-hcd.1.auto
[    8.554946] hub 3-0:1.0: USB hub found
[    8.555188] hub 3-0:1.0: 1 port detected
[    8.574029] mmc1: CQHCI version 5.10
[    8.583680] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.583919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    8.583927] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.583931] usb usb4: Product: xHCI Host Controller
[    8.583935] usb usb4: Manufacturer: Linux 6.1.119-ophub xhci-hcd
[    8.583938] usb usb4: SerialNumber: xhci-hcd.1.auto
[    8.588345] hub 4-0:1.0: USB hub found
[    8.588383] hub 4-0:1.0: 1 port detected
[    8.629116] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    8.681057] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[    8.695904] mmc1: Command Queue Engine enabled
[    8.695935] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    8.696729] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB
[    8.699674] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    8.699689] GPT:6324223 != 61071359
[    8.699697] GPT:Alternate GPT header not at the end of the disk.
[    8.699700] GPT:6324223 != 61071359
[    8.699703] GPT: Use GNU Parted to correct GPT errors.
[    8.699728]  mmcblk1: p1 p2
[    8.701158] mmcblk1boot0: mmc1:0001 BJTD4R 4.00 MiB
[    8.702553] mmcblk1boot1: mmc1:0001 BJTD4R 4.00 MiB
[    8.703634] mmcblk1rpmb: mmc1:0001 BJTD4R 4.00 MiB, chardev (240:0)
[    8.945235] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.

请问交换芯片mt7530DU 能正常使用吗？

[lilmik]

这么快就适配了，88买这东西不亏~

[JIJK4]

这么快就适配了，88买这东西不亏~

网口还是一个吧

[shabby2333]

这么快就适配了，88买这东西不亏~

网口还是一个吧

网口只认一个，能当傻瓜交换机用

[lilmik]

这么快就适配了，88买这东西不亏~

网口还是一个吧

是的，任意插入一个网口是可以用的。插入多个网口就连不上断网了

[shabby2333]

这么快就适配了，88买这东西不亏~

网口还是一个吧

是的，任意插入一个网口是可以用的。插入多个网口就连不上断网了

多个也行 不环路即可