Implement observer instrument

examples/metrics/observer_example.py

@@ -0,0 +1,72 @@
+# Copyright 2020, OpenTelemetry Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+"""
+This example shows how the Observer metric instrument can be used to capture
+asynchronous metrics data.
+"""
+import psutil
+
+from opentelemetry import metrics
+from opentelemetry.sdk.metrics import LabelSet, Meter
+from opentelemetry.sdk.metrics.export import ConsoleMetricsExporter
+from opentelemetry.sdk.metrics.export.batcher import UngroupedBatcher
+from opentelemetry.sdk.metrics.export.controller import PushController
+
+# Configure a stateful batcher
+batcher = UngroupedBatcher(stateful=True)
+
+metrics.set_preferred_meter_implementation(lambda _: Meter(batcher))
+meter = metrics.meter()
+
+# Exporter to export metrics to the console
+exporter = ConsoleMetricsExporter()
+
+# Configure a push controller
+controller = PushController(meter=meter, exporter=exporter, interval=2)
+
+
+# Callback to gather cpu usage
+def get_cpu_usage_callback(observer):
+    for (number, percent) in enumerate(psutil.cpu_percent(percpu=True)):
+        label_set = meter.get_label_set({"cpu_number": str(number)})
+        observer.observe(percent, label_set)
+
+
+meter.register_observer(
+    callback=get_cpu_usage_callback,
+    name="cpu_percent",
+    description="per-cpu usage",
+    unit="1",
+    value_type=float,
+    label_keys=("cpu_number",),
+)
+
+
+# Callback to gather RAM memory usage
+def get_ram_usage_callback(observer):
+    ram_percent = psutil.virtual_memory().percent
+    observer.observe(ram_percent, LabelSet())
+
+
+meter.register_observer(
+    callback=get_ram_usage_callback,
+    name="ram_percent",
+    description="RAM memory usage",
+    unit="1",
+    value_type=float,
+    label_keys=(),
+)
+
+input("Press a key to finish...\n")

examples/metrics/record.py

@@ -30,15 +30,25 @@
 exporter = ConsoleMetricsExporter()
 # controller collects metrics created from meter and exports it via the
 # exporter every interval
-controller = PushController(meter, exporter, 5)
+controller = PushController(meter=meter, exporter=exporter, interval=5)
 
 # Example to show how to record using the meter
 counter = meter.create_metric(
-    "requests", "number of requests", 1, int, Counter, ("environment",)
+    name="requests",
+    description="number of requests",
+    unit="1",
+    value_type=int,
+    metric_type=Counter,
+    label_keys=("environment",),
 )
 
 counter2 = meter.create_metric(
-    "clicks", "number of clicks", 1, int, Counter, ("environment",)
+    name="clicks",
+    description="number of clicks",
+    unit="1",
+    value_type=int,
+    metric_type=Counter,
+    label_keys=("environment",),
 )
 
 # Labelsets are used to identify key-values that are associated with a specific

examples/metrics/simple_example.py

@@ -29,6 +29,7 @@
 from opentelemetry.sdk.metrics.export.controller import PushController
 
 batcher_mode = "stateful"
+stateful_bacher = False
 
 
 def usage(argv):
@@ -50,7 +51,8 @@ def usage(argv):
 # lifetime.
 # False indicates the batcher computes checkpoints which describe the updates
 # of a single collection period (deltas)
-batcher = UngroupedBatcher(batcher_mode == "stateful")
+stateful_bacher = batcher_mode == "stateful"
+batcher = UngroupedBatcher(stateful=stateful_bacher)
 
 # If a batcher is not provided, a default batcher is used
 # Meter is responsible for creating and recording metrics
@@ -66,15 +68,30 @@ def usage(argv):
 
 # Metric instruments allow to capture measurements
 requests_counter = meter.create_metric(
-    "requests", "number of requests", 1, int, Counter, ("environment",)
+    name="requests",
+    description="number of requests",
+    unit="1",
+    value_type=int,
+    metric_type=Counter,
+    label_keys=("environment",),
 )
 
 clicks_counter = meter.create_metric(
-    "clicks", "number of clicks", 1, int, Counter, ("environment",)
+    name="clicks",
+    description="number of clicks",
+    unit="1",
+    value_type=int,
+    metric_type=Counter,
+    label_keys=("environment",),
 )
 
 requests_size = meter.create_metric(
-    "requests_size", "size of requests", 1, int, Measure, ("environment",)
+    name="requests_size",
+    description="size of requests",
+    unit="1",
+    value_type=int,
+    metric_type=Measure,
+    label_keys=("environment",),
 )
 
 # Labelsets are used to identify key-values that are associated with a specific
@@ -86,21 +103,15 @@ def usage(argv):
 # Update the metric instruments using the direct calling convention
 requests_size.record(100, staging_label_set)
 requests_counter.add(25, staging_label_set)
-# Sleep for 5 seconds, exported value should be 25
 time.sleep(5)
 
 requests_size.record(5000, staging_label_set)
 requests_counter.add(50, staging_label_set)
-# Exported value should be 75
 time.sleep(5)
 
 requests_size.record(2, testing_label_set)
 requests_counter.add(35, testing_label_set)
-# There should be two exported values 75 and 35, one for each labelset
 time.sleep(5)
 
 clicks_counter.add(5, staging_label_set)
-# There should be three exported values, labelsets can be reused for different
-# metrics but will be recorded seperately, 75, 35 and 5
-
 time.sleep(5)

opentelemetry-api/src/opentelemetry/metrics/__init__.py

@@ -47,13 +47,6 @@ def add(self, value: ValueT) -> None:
             value: The value to add to the handle.
         """
 
-    def set(self, value: ValueT) -> None:
-        """No-op implementation of `GaugeHandle` set.
-
-        Args:
-            value: The value to set to the handle.
-        """
-
     def record(self, value: ValueT) -> None:
         """No-op implementation of `MeasureHandle` record.
 
@@ -71,15 +64,6 @@ def add(self, value: ValueT) -> None:
         """
 
 
-class GaugeHandle:
-    def set(self, value: ValueT) -> None:
-        """Sets the current value of the handle to ``value``.
-
-        Args:
-            value: The value to set to the handle.
-        """
-
-
 class MeasureHandle:
     def record(self, value: ValueT) -> None:
         """Records the given ``value`` to this handle.
@@ -121,7 +105,7 @@ def get_handle(self, label_set: LabelSet) -> "object":
 
         Handles are useful to reduce the cost of repeatedly recording a metric
         with a pre-defined set of label values. All metric kinds (counter,
-        gauge, measure) support declaring a set of required label keys. The
+        measure) support declaring a set of required label keys. The
         values corresponding to these keys should be specified in every handle.
         "Unspecified" label values, in cases where a handle is requested but
         a value was not provided are permitted.
@@ -150,14 +134,6 @@ def add(self, value: ValueT, label_set: LabelSet) -> None:
             label_set: `LabelSet` to associate with the returned handle.
         """
 
-    def set(self, value: ValueT, label_set: LabelSet) -> None:
-        """No-op implementation of `Gauge` set.
-
-        Args:
-            value: The value to set the gauge metric to.
-            label_set: `LabelSet` to associate with the returned handle.
-        """
-
     def record(self, value: ValueT, label_set: LabelSet) -> None:
         """No-op implementation of `Measure` record.
 
@@ -183,28 +159,6 @@ def add(self, value: ValueT, label_set: LabelSet) -> None:
         """
 
 
-class Gauge(Metric):
-    """A gauge type metric that expresses a pre-calculated value.
-
-    Gauge metrics have a value that is either ``Set`` by explicit
-    instrumentation or observed through a callback. This kind of metric
-    should be used when the metric cannot be expressed as a sum or because
-    the measurement interval is arbitrary.
-    """
-
-    def get_handle(self, label_set: LabelSet) -> "GaugeHandle":
-        """Gets a `GaugeHandle`."""
-        return GaugeHandle()
-
-    def set(self, value: ValueT, label_set: LabelSet) -> None:
-        """Sets the value of the gauge to ``value``.
-
-        Args:
-            value: The value to set the gauge metric to.
-            label_set: `LabelSet` to associate with the returned handle.
-        """
-
-
 class Measure(Metric):
     """A measure type metric that represent raw stats that are recorded.
 
@@ -224,15 +178,46 @@ def record(self, value: ValueT, label_set: LabelSet) -> None:
         """
 
 
-MetricT = TypeVar("MetricT", Counter, Gauge, Measure)
+class Observer:
+    """An observer type metric instrument used to capture a current set of values.
+
+
+    Observer instruments are asynchronous, a callback is invoked with the
+    observer instrument as argument allowing the user to capture multiple
+    values per collection interval.
+    """
+
+    def observe(self, value: ValueT, label_set: LabelSet) -> None:
+        """Captures ``value`` to the observer.
+
+        Args:
+            value: The value to capture to this observer metric.
+            label_set: `LabelSet` associated to ``value``.
+        """
+
+
+class DefaultObserver(Observer):
+    """No-op implementation of ``Observer``."""
+
+    def observe(self, value: ValueT, label_set: LabelSet) -> None:
+        """Captures ``value`` to the observer.
+
+        Args:
+            value: The value to capture to this observer metric.
+            label_set: `LabelSet` associated to ``value``.
+        """
+
+
+MetricT = TypeVar("MetricT", Counter, Measure, Observer)
+ObserverCallbackT = Callable[[Observer], None]
 
 
 # pylint: disable=unused-argument
 class Meter(abc.ABC):
     """An interface to allow the recording of metrics.
 
-    `Metric` s are used for recording pre-defined aggregation (gauge and
-    counter), or raw values (measure) in which the aggregation and labels
+    `Metric` s are used for recording pre-defined aggregation (counter),
+    or raw values (measure) in which the aggregation and labels
     for the exported metric are deferred.
     """
 
@@ -272,14 +257,41 @@ def create_metric(
         Args:
             name: The name of the metric.
             description: Human-readable description of the metric.
-            unit: Unit of the metric values.
+            unit: Unit of the metric values following the UCUM convention
+                (https://unitsofmeasure.org/ucum.html).
             value_type: The type of values being recorded by the metric.
             metric_type: The type of metric being created.
             label_keys: The keys for the labels with dynamic values.
             enabled: Whether to report the metric by default.
         Returns: A new ``metric_type`` metric with values of ``value_type``.
         """
 
+    @abc.abstractmethod
+    def register_observer(
+        self,
+        callback: ObserverCallbackT,
+        name: str,
+        description: str,
+        unit: str,
+        value_type: Type[ValueT],
+        label_keys: Sequence[str] = (),
+        enabled: bool = True,
+    ) -> "Observer":
+        """Registers an ``Observer`` metric instrument.
+
+        Args:
+            callback: Callback invoked each collection interval with the
+                observer as argument.
+            name: The name of the metric.
+            description: Human-readable description of the metric.
+            unit: Unit of the metric values following the UCUM convention
+                (https://unitsofmeasure.org/ucum.html).
+            value_type: The type of values being recorded by the metric.
+            label_keys: The keys for the labels with dynamic values.
+            enabled: Whether to report the metric by default.
+        Returns: A new ``Observer`` metric instrument.
+        """
+
     @abc.abstractmethod
     def get_label_set(self, labels: Dict[str, str]) -> "LabelSet":
         """Gets a `LabelSet` with the given labels.
@@ -314,6 +326,18 @@ def create_metric(
         # pylint: disable=no-self-use
         return DefaultMetric()
 
+    def register_observer(
+        self,
+        callback: ObserverCallbackT,
+        name: str,
+        description: str,
+        unit: str,
+        value_type: Type[ValueT],
+        label_keys: Sequence[str] = (),
+        enabled: bool = True,
+    ) -> "Observer":
+        return DefaultObserver()
+
     def get_label_set(self, labels: Dict[str, str]) -> "LabelSet":
         # pylint: disable=no-self-use
         return DefaultLabelSet()