faq/stream-to: Document all the issues with using SqueezeLite for local playback

docs/faq/stream-to.md

@@ -1,6 +1,39 @@
 ## My Local HA Device
 
-Install the [squeezelite addon](https://github.com/pssc/ha-addon-squeezelite) which will then allow streaming over an audio connection from the HA host to your speaker or amplifier
+Install the [squeezelite addon](https://github.com/pssc/ha-addon-squeezelite) which will then allow streaming over an audio connection from the HA host to your speaker or amplifier.
+
+Some problems (listed individually below) may affect this solution and the following settings should avoid all these issues:
+
+  * Enable “Show unused configuration options” on the SqueezeLite add-on, then set:
+    * build: **pa** (PortAudio) or **alsa**
+    * options: `-a 150ms` (target latency, experiment to find best value)
+  * Ensure that the *Output format* format in the Music Assistant *Advanced Settings* for the player is set to anything *other* than **WAV**.
+
+### Audio too fast or slow on track change (wrong sampling rate)
+
+The PulseAudio version of SqueezeLite has a known issue of [playing back audio with the wrong sampling rate](https://github.com/ralph-irving/squeezelite/issues/177) on track changes.
+
+If this is encountered, enable “Show unused configuration options” in the SqueezeLite settings and change the *build* type to **pa** (PortAudio) or **alsa**.
+
+### Initial audio swallowed or stuttering on track change
+
+The PulseAudio version of SqueezeLite also has known [synchronization problems on track changes](https://github.com/ralph-irving/squeezelite/issues/155).
+
+If this is encountered then, as above, change the *build* type to **pa** (PortAudio) or **alsa**.
+
+### “Helicopter noises” / chopped off playback
+
+If “[helicopter noises](https://github.com/pssc/ha-addon-squeezelite/issues/1)” are heard then adjust the target latency to a higher value.
+
+To do so, enable “Show unused configuration options” and add `-a 150ms` to the *options* text field while using the ALSA or PA (PortAudio) *build*. Experimentation with higher or lower values may be required.
+
+### Static instead of audio playback on some tracks
+
+This is [an issue with Music Assistant itself](https://github.com/music-assistant/support/issues/4163) and affects all tracks not using the `i16` sampling format (such as 24/32-bit audio) when streaming with the **WAV** *Output codec*.
+
+When encountering this issue, change the *Output format* to **FLAC** (or any other non-WAV format) in the Music Assistant player *Advanced Settings*.
+
+Alternatively, enabling “Show unused configuration options” and adding `-W` to the *options* field of the SqueezeLite add-on also works around this issue.
 
 ## My Random Connected Device