rpi-io

rpi-io is a lite ESM module for Node.js to control Raspberry Pi GPIO: access (in, out), input event detection and PWM peripheral control.

rpi-io is built on a high performance hybrid architecture based on Node.js + C addon.

rpi-io is designed for recent versions of Raspberry and related OS and middlewares. It has been tested in the following environments:

Raspberry Pi models: RPi 5, RPi 4B and RPi Zero 2.
Raspberry Pi OS (64-bit): Debian Bookworm and Trixie.
Middlewares (installed by default with OS distribution):
- Input/Output - libgpiod v1.6.3 (Bookworm) and v2.2.1 (Trixie)
- PWM - sysfs interface.

Prerequisites

libgpiod

By default, libgpiod is available with the latest Raspberry Pi OS distributions. If you want to install rpi-io with older - not tested - distributions, be sure it is installed.

sudo apt-get update
sudo apt-get install -y libgpiod-dev gpiod

Then check the installed version

gpioinfo --version

Compilation tools

sudo apt-get install -y build-essential python3

Node.js

Please make sure that you a recent version of Node.js. Recommended tested versions are v23 and further as they support require(esm) by default.

Older versions starting at v20.19 where require(esm) has been backported should work as well, but they haven't been tested extensively.

Installation

1. User rights

To run scripts without sudo, add your user to the gpio group.

sudo usermod -a -G gpio $USER

Then log out and log back in.

2. Install the module from your project main directory

cd /your-project
npm install rpi-io

3. Compile C addon from rpi-io directory

cd /your-project/node_modules/rpi-io/
npm install

If you meet errors during this step, stay in the same directory and check your environment.

npm run check

If the error is an alert about high-level vulnerabilities related to the tar module,

be sure that you are installing rpi-io version 2.0.8 or more,
follow the NPM recommendation to run npm audit fix --force to install the appropriate version of node-gyp.

If you need to recompile the module when errors are fixed, stay in the same directory and the run the following scripts.

npm run clean
npm run install

Configuration for PWM-based peripherals

If you want to use hardware-based PWM peripherals, some configuration is required:

Edit the file /boot/firmware/config.txt and add the required dtoverlay configuration for PWM as showed in the examples below.

sudo nano /boot/firmware/config.txt

# Examples of PWM configuration to add to/boot/firmware/config.txt
# Default one-channel config: GPIO 18 as channel 0
[all]
dtoverlay=pwm
# Default two-channel config: GPIO 18 as channel 0 and GPIO 19 as channel 1
[all]
dtoverlay=pwm-2chan
# Custom two-channel config: GPIO 12 as channel 0 and GPIO 13 as channel 1
[all]
dtoverlay=pwm-2chan,pin=12,func=4,pin2=13,func2=4

Reboot the Raspberry Pi.
Test the PWM configuration.

# Testing PWM configuration after reboot
pinctrl get 12
# 12: a0    pd | lo // GPIO12 = PWM0_CHAN0
pinctrl get 13
# 13: a0    pd | lo // GPIO13 = PWM0_CHAN1

Usage

PLEASE NOTE: In all this document, GPIO line numbers are the BCM ones as defined in https://pinout.xyz/.

OUT operations

Example of LED control

Diagram

GPIO Pin (Output)
          │
         ┌┴┐
         │ │  Current-limiting resistor (220Ω or 330Ω)
         └┬┘
          │
          ▼   ← LED (anode +)
         ───
          |   ← LED (cathode -)
          |
        ─────  GND (0V)
          ─

Code example

// Import rpi-io module
import {RIO} from "rpi-io"

// Define instance for OUT operation on some GPIO e.g. 17 with initial value
const led = new RIO(17, "output", {value: 0})

// Turn the led on
led.write(1)

// Turn the led off after 5s and close the instance before leaving
setTimeout(()=>{
    led.write(0)
    led.close()
}, 5000)

IN operations

Getting button status and listening to input events

Diagram of pull-down electronic circuit

VCC (3.3V)
          │
          ○  ← Switch/Button (open = not pressed)
          │
          ├──────────── GPIO Pin
          │
         ┌┴┐
         │ │  Pull-down resistor (10kΩ typical)
         └┬┘
          │
        ─────  GND (0V)
          ─

Code example

// Import rpi-io module
import {RIO, ctrlC} from "rpi-io"

// Define instance for IN operation on some GPIO e.g. 18
const btn = new RIO(18, "input", {bias: "pull-down"})

// Close instance on script interrupt
ctrlC(() => {
    btn.close()
})

// Instant read
console.log("button value:", btn.read())

// Event monitoring for both edges ("rising"/"falling") with rebounce threshold (30)
const callback = edge => {console.log("edge:", edge)}
btn.monitoringStart(callback, "both", 30)

// Stop monitoring after 10s
setTimeout(()=>{
    btn.monitoringStop()
}, 10000)

Pull-up variant

VCC (3.3V)
          │
         ┌┴┐
         │ │  Pull-up resistor (10kΩ typical)
         └┬┘
          │
          ├──────────── GPIO Pin
          │
          ○  ← Switch/Button (open = not pressed)
          │
        ─────  GND (0V)
          ─

const btn = new RIO(18, "input", {bias: "pull-up"})

PWM operations in hardware mode

Servo motor

REMINDER: PWM peripherals used in hardware mode need some specific [configuration](## Configuration for PWM-based peripherals).

Diagram for servo-motor SG90

                                    ┌─────────────────────┐
                                    │                     │
        External Power (5V)         │    Servo Motor      │
              │                     │                     │
              │    VCC (red)        │  ┌───────────────┐  │
              ├────────────────────────┤               │  │
              │                     │  │     Motor     │  │
              │    GND (brown/black)│  └───────┬───────┘  │
              ├────────────────────────────────┤          │
              │                     │    ┌─────┴─────┐    │
              │                     │    │   Gear    │    │
              │                     │    │   Box     │    │
              │                     │    └─────┬─────┘    │
              │                     │     ─────┴─────     │
              │                     │    ( Servo Arm )    │
              │    Signal (orange)  │                     │
 GPIO Pin ─────────────────────────────                   │
   (PWM)                            │                     │
              │                     └─────────────────────┘
              │
            ─────  Common GND ← Important: Pi GND must connect here
              ─

Code example

import {RIO, sleep, ctrlC, } from "rpi-io"

(async () => {
  
    // Init pwm line (13) and set duty range in µs
    const servo = new RIO(13, "pwm", {
        period: 20000,  // 20,000,000 ns ~ 50 Hz
        dutyMin: 500,   //    500,000 ns ~ 0.5 ms
        dutyMax: 2500   //  2,500,000 ns ~ 2.5 ms
    })
    ctrlC(() => {
        servo.close()
    })

    await sleep(2000)
    servo.pwmDuty(50)
    console.log("servo duty = 50%")     // ~ 0.5 + (0.5 * (2.5 ms - 0.5 ms)) = 1.5 ms
    await sleep(2000)
    servo.pwmDuty(100)
    console.log("servo duty = 100%")    // ~ 0.5 + (1.0 * (2.5 ms - 0.5 ms)) = 2.5 ms
    await sleep(2000)
    servo.pwmDuty(0)
    console.log("servo duty = 0%")      // ~ 0.5 + (0.0 * (2.5 ms - 0.5 ms)) = 0.5 ms
    await sleep(2000)
    servo.close()
    console.log("servo closed")
})()

Fade-in LED

PWM can also be used for progressive LED light with the same electronic circuit as write operations. See example below.

import {RIO, sleep, ctrlC, } from "rpi-io"
(async () => {
    // Init pwm line 12 and duty range in µs
    const led = new RIO(12, "pwm", {
        period: 1000,  // 1,000,000 ns ~ 1 KHz
        dutyMin: 0,
        dutyMax: 1000
    })
 
    ctrlC(() => {
        led.close()
    })

    for (let i = 1; i < 101; i++) {
        led.pwmDuty(i)
        await sleep(30, false)
    }
    await sleep(2000, false)
    led.pwmDuty(0)
    led.close()
    log("led closed")
})()

More examples

To get familiar with the module, you might have a glance on examples and play with them with the GPIO lines of your own electronic circuit.

# Simple write
node /your-project/node_modules/rpi-io/test/write.js

# Read and monitor
node /your-project/node_modules/rpi-io/test/read.js

# LED fade-in on PWM line
node /your-project/node_modules/rpi-io/test/pwm-led.js

# Servo-motor SG90 controlled by PWM
node /your-project/node_modules/rpi-io/test/pwm-motor.js

# Test duplicated instance error
node /your-project/node_modules/rpi-io/test/duplicate-error.js

# Test close of all instances
node /your-project/node_modules/rpi-io/test/close-all.js

# Test GPIO line configuration
node /your-project/node_modules/rpi-io/test/line-configuration.js

API

The rpi-io API is based on the class RIO with instance methods.

RIO class and methods

constructor RIO(line, mode, opt)

To create instance according to parameters.

Example

import {RIO} from "rpi-io"
const myOutput = new RIO(17, "output")

Parameter(s)

line {Number} Must be one of the GPIO number as defined in pinout.xyz.
mode {String} Must be one of the following values: "output", "input", "pwm".
opt {Object} Various options depending on selected mode. See details and default values below.

{
  // output - Initial value
  value: 0,
  // input - Circuit bias: "disable", "pull-up", "pull-down"
  bias: "disable",
  // pwm - Delay time (ms) required on instance creation
  //			 depending on device performance. If this value is
  //       too small, the PWM instance creation fails.
  //			 Can be reduced for latest RPi 5
  //			 Must be increased for old RPi Zero.
  exportTime: 100,
  // pwm - period defined in μs. Default value is equivalent
  //			 to a 50 Hz frequency.
  period: 20000,
  // pwm - dutyMin and dutyMax defines the duty cycle use range in µs
  // 		   especially for servo-motors (See their specs!).
  dutyMin: 0,
  dutyMax: 20000
}

Return

{Object} RIO instance

close()

To close instance i.e.

to prevent future use of the line with the current instance
to stop related monitoring process if any
to free PWM resources if any

To reuse a line when closed, a new instance must be created.

Example

import {RIO} from "rpi-io"
const myOutput = new RIO(17, "output")
myOutput.close()

write(value)

To write some value to "output" instance.

Example

import {RIO} from "rpi-io"
const myOutput = new RIO(17, "output")
myOuput.write(1)

Parameter(s)

value {Number} 0 or 1

read()

To read value from "input" instance.

Example

import {RIO} from "rpi-io"
const myInput = new RIO(18, "input")
const result = myInput.read()

Return

{Number} 0 or 1

monitoringStart(callback, edge, bounce)

To start event monitoring of "input" instance.

Example

import {RIO} from "rpi-io"
const myButton = new RIO(18, "input")
const callback = edge => {
    console.log("edge:", edge)
}
myButton.monitoringStart(callback, "both", 30)

Parameter(s)

callback {Function} Function triggered by input events where parameter is edge that can be either "rising" (input change from 0 to 1) or "falling" (input change from 1 to 0).
edge {String} Filter of monitored events: "rising", "falling", "both" (default value).
bounce {Number} Set threshold in ms to filter consecutive events of same type. Default value is 0.

monitoringStop()

To stop event monitoring of "input" instance.

Example

import {RIO} from "rpi-io"
const myButton = new RIO(18, "input")
const callback = 
myButton.monitoringStart(edge => {console.log("edge:", edge)})
// Stop monitoring after 10s
setTimeout(() => {
  myButton.monitoringStop()
}, 10000)

pwmDuty(percent)

To change the duty cycle of a "pwm" instance. The parameter is defined as a percentage to compute a duty cycle based on the dutyMin and dutyMax values of instance definition.

Example

import {RIO} from "rpi-io"
// Servo-motor instance
const servo = new RIO(13, "pwm", {
        exportTime: 100,
        period: 20000,
        dutyMin: 500,
        dutyMax: 2500})

// duty cycle = 50% between dutyMin and dutyMax
servo.pwmDuty(50)

Parameter(s)

percent {Number} 0 ≤ percent ≤ 100

Utilities

RIO.closeAll()

Function to close all instances

Example

import {RIO} from "rpi-io"
const led = new RIO(17, "output", {value: 0})
const btn = new RIO(18, "input")
RIO.closeAll()
// led and btn are closed

log(args)

Function similar to console.log but with timestamped prompt. Must be enabled or not by function traceCfg defined thereafter.

warn(args)

Function similar to log but colored and prefixed by sign ⚠️.

traceCfg(level)

Function to enable functions log and warn.

Example for log, warn and traceCfg

import {traceCfg, log, warn} from "rpi-io"
// traceCfg(0) => warn and log are disabled
// traceCfg(1) => warn is enabled and log is disabled
// traceCfg(2) => warn and log are enabled
traceCfg(2)
warn("This is important info") 
log("This is useful info")

sleep(time)

Similar to setTimeout but in async mode.

ctrlC(function)

To run a callback function on ctrl+c event.

Example for sleep and ctrlC

import {sleep, ctrlC} from "rpi-io"
(async () => {
    ctrlC(() => {
        console.log("displayed on script interrupt")
    })
    await sleep(10000)
    console.log("displayed after 10s")
})()

Benchmark

The following tables summarize main operation times on various devices. Results are in micro-seconds (µs).

PLEASE NOTE: As PWM operations rely on files, performance of microSD cards installed on RPi may have a significant impact on results for pwmDuty().

OS Bookworm with libgpiod v1.6.3

	RPi 5B	RPi 4B	RPi Zero2
write	0.72 µs	1.30 µs	2,37 µs
read	1.32 µs	1,09 µs	1,90 µs
pwmDuty (1 KHz)	15.6 µs	25,6 µs	48,4 µs

OS Trixie with libgpiod v2.2.1

	RPi 5B	RPi 4B	RPi Zero2
write	not tested	1.20 µs	not tested
read	not tested	1.37 µs	not tested
pwmDuty (1 KHz)	not tested	24,9 µs	not tested

Licence

MIT

Name		Name	Last commit message	Last commit date
Latest commit History 40 Commits
addon		addon
esm		esm
script		script
test		test
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
binding.gyp		binding.gyp
history.md		history.md
package.json		package.json

Folders and files

Latest commit

History

Repository files navigation

rpi-io

Prerequisites

libgpiod

Compilation tools

Node.js

Installation

Configuration for PWM-based peripherals

Usage

OUT operations

Example of LED control

Diagram

Code example

IN operations

Getting button status and listening to input events

Diagram of pull-down electronic circuit

Code example

Pull-up variant

PWM operations in hardware mode

Servo motor

Diagram for servo-motor SG90

Code example

Fade-in LED

More examples

API

RIO class and methods

constructor RIO(line, mode, opt)

Example

Parameter(s)

Return

close()

Example

write(value)

Example

Parameter(s)

read()

Example

Return

monitoringStart(callback, edge, bounce)

Example

Parameter(s)

monitoringStop()

Example

pwmDuty(percent)

Example

Parameter(s)

Utilities

RIO.closeAll()

Example

log(args)

warn(args)

traceCfg(level)

Example for log, warn and traceCfg

sleep(time)

ctrlC(function)

Example for sleep and ctrlC

Benchmark

Licence

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Contributors

Uh oh!

Languages

Packages