ClusterProperty

Parameters

Parameter	Attribute	DataType	Description	Allowed Values
Name	Key	String	Name of the cluster.
AddEvictDelay	Write	UInt32	Specifies how many seconds after a node is evicted that the failover cluster service will wait before adding a new node.
BlockCacheSize	Write	UInt32	Controls the size of the Cluster Shared Volume Memory Cache in MB.
ClusterLogLevel	Write	UInt32	Controls the level of cluster logging.
ClusterLogSize	Write	UInt32	Controls the maximum size of the cluster log files on each of the nodes.
CrossSiteDelay	Write	UInt32	Controls the time interval, in milliseconds, that the cluster network driver waits between sending Cluster Service heartbeats across sites.
CrossSiteThreshold	Write	UInt32	Controls how many Cluster Service heartbeats that can be missed across sites before it determines that Cluster Service has stopped responding.
CrossSubnetDelay	Write	UInt32	Controls the time interval, in milliseconds, that the cluster network driver waits between sending Cluster Service heartbeats across subnets.
CrossSubnetThreshold	Write	UInt32	Controls how many Cluster Service heartbeats that can be missed across subnets before it determines that Cluster Service has stopped responding.
DatabaseReadWriteMode	Write	UInt32	Specifies the read/write mode for the cluster database.
DefaultNetworkRole	Write	UInt32	Specifies the role that the cluster automatically assigns to any newly discovered or created network.
Description	Write	String	Stores administrative comments about the cluster.
DrainOnShutdown	Write	UInt32	Specifies whether to enable Node Drain for a cluster.
DynamicQuorum	Write	UInt32	Enables the cluster to change the required number of nodes that need to participate in quorum when nodes shut down or crash.
NetftIPSecEnabled	Write	UInt32	Specifies whether Internet Protocol Security (IPSec) encryption is enabled for inter-node cluster communication.
PreferredSite	Write	String	Specifies the preferred site for a site-aware cluster.
QuarantineDuration	Write	UInt32	Specifies the quarantine duration for a node, in seconds.
QuarantineThreshold	Write	UInt32	Specifies the quarantine threshold for a node, in minutes.
SameSubnetDelay	Write	UInt32	Controls the delay, in milliseconds, between netft heartbeats.
SameSubnetThreshold	Write	UInt32	Controls how many heartbeats can be missed on the same subnet before the route is declared as unreachable.
ShutdownTimeoutInMinutes	Write	UInt32	Specifies how many minutes after a system shutdown is initiated that the failover cluster service will wait for resources to go offline.

Description

Configures cluster properties on a failover cluster.

Requirements

• Target machine must be running Windows Server 2008 R2 or later.

Examples

Example 1

This example shows how to set a number of failover cluster properties.

.NOTES This example assumes the failover cluster is already present.

Configuration ClusterProperty_SetClusterPropertiesConfig
{
    Import-DscResource -ModuleName FailoverClusterDsc

    node localhost
    {
        ClusterProperty SetProperties
        {
            Name = 'Cluster1'
            AddEvictDelay = 60
            ClusterLogSize = 300
            Description = ''
            SameSubnetDelay = 1000
            SameSubnetThreshold = 5
        }
    }
}