Twisted Edwards parameters for BLS12-377

CHANGELOG.md

@@ -2,6 +2,8 @@
 
 ## Pending
 
+- [\#76](https://github.com/arkworks-rs/curves/pull/76) twisted Edwards parameters for bls12-377
+
 ### Breaking changes
 
 ### Features

bls12_377/src/constraints/curves.rs

@@ -1,11 +1,22 @@
 use crate::Parameters;
-use ark_r1cs_std::groups::bls12;
+use ark_ec::bls12::Bls12Parameters;
+use ark_ec::ModelParameters;
+use ark_r1cs_std::{
+    fields::fp::FpVar,
+    groups::{bls12, curves::twisted_edwards::AffineVar as TEAffineVar},
+};
 
 /// An element of G1 in the BLS12-377 bilinear group.
 pub type G1Var = bls12::G1Var<Parameters>;
 /// An element of G2 in the BLS12-377 bilinear group.
 pub type G2Var = bls12::G2Var<Parameters>;
 
+/// An element of G1 (in TE Affine form) in the BLS12-377 bilinear group.
+pub type G1TEAffineVar = TEAffineVar<
+    <Parameters as Bls12Parameters>::G1Parameters,
+    FpVar<<<Parameters as Bls12Parameters>::G1Parameters as ModelParameters>::BaseField>,
+>;
+
 /// Represents the cached precomputation that can be performed on a G1 element
 /// which enables speeding up pairing computation.
 pub type G1PreparedVar = bls12::G1PreparedVar<Parameters>;
@@ -21,6 +32,11 @@ fn test() {
         G1Var,
     >()
     .unwrap();
+    ark_curve_constraint_tests::curves::te_test::<
+        <Parameters as Bls12Parameters>::G1Parameters,
+        G1TEAffineVar,
+    >()
+    .unwrap();
     ark_curve_constraint_tests::curves::sw_test::<
         <Parameters as Bls12Parameters>::G2Parameters,
         G2Var,

bls12_377/src/curves/g1.rs

@@ -1,5 +1,11 @@
-use ark_ec::models::{ModelParameters, SWModelParameters};
+use ark_ec::models::{
+    twisted_edwards_extended::{
+        GroupAffine as TEGroupAffine, GroupProjective as TEGroupProjective,
+    },
+    ModelParameters, MontgomeryModelParameters, SWModelParameters, TEModelParameters,
+};
 use ark_ff::{field_new, Zero};
+use core::ops::Neg;
 
 use crate::{
     fields::{FQ_ONE, FQ_ZERO},
@@ -40,6 +46,128 @@ impl SWModelParameters for Parameters {
     }
 }
 
+pub type G1TEAffine = TEGroupAffine<Parameters>;
+pub type G1TEProjective = TEGroupProjective<Parameters>;
+
+// BLS12-377::G1 also has a twisted Edwards form.
+// It can be obtained via the following script, implementing
+// 1. SW -> Montgomery -> TE1 transformation: https://en.wikipedia.org/wiki/Montgomery_curve
+// 2. TE1 -> TE2 normalization (enforcing `a = -1`)
+// ``` sage
+//
+// # modulus
+// p=0x1ae3a4617c510eac63b05c06ca1493b1a22d9f300f5138f1ef3622fba094800170b5d44300000008508c00000000001
+// Fp=Zmod(p)
+//
+// #####################################################
+// # Weierstrass curve: y² = x³ + A * x + B
+// #####################################################
+// # curve y^2 = x^3 + 1
+// WA=Fp(0)
+// WB=Fp(1)
+//
+// #####################################################
+// # Montgomery curve: By² = x³ + A * x² + x
+// #####################################################
+// # root for x^3 + 1 = 0
+// alpha = -1
+// # s = 1 / (sqrt(3alpha^2 + a))
+// s = 1/(Fp(3).sqrt())
+//
+// # MA = 3 * alpha * s
+// MA=Fp(228097355113300204138531148905234651262148041026195375645000724271212049151994375092458297304264351187709081232384)
+// # MB = s
+// MB=Fp(10189023633222963290707194929886294091415157242906428298294512798502806398782149227503530278436336312243746741931)
+//
+// # #####################################################
+// # # Twisted Edwards curve 1: a * x² + y² = 1 + d * x² * y²
+// # #####################################################
+// # a = (MA+2)/MB
+// TE1a=Fp(61134141799337779744243169579317764548490943457438569789767076791016838392692895365021181670618017873462480451583)
+// # b = (MA-2)/MB
+// TE1d=Fp(197530284213631314266409564115575768987902569297476090750117185875703629955647927409947706468955342250977841006588)
+//
+// # #####################################################
+// # # Twisted Edwards curve 2: a * x² + y² = 1 + d * x² * y²
+// # #####################################################
+// # a = -1
+// TE2a=Fp(-1)
+// # b = -TE1d/TE1a
+// TE2d=Fp(122268283598675559488486339158635529096981886914877139579534153582033676785385790730042363341236035746924960903179)
+//
+// ```
+
+impl TEModelParameters for Parameters {
+    /// COEFF_A = -1
+    const COEFF_A: Fq = field_new!(Fq, "-1");
+
+    /// COEFF_D = 122268283598675559488486339158635529096981886914877139579534153582033676785385790730042363341236035746924960903179 mod q
+    #[rustfmt::skip]
+    const COEFF_D: Fq = field_new!(Fq, "122268283598675559488486339158635529096981886914877139579534153582033676785385790730042363341236035746924960903179");
+
+    /// COFACTOR = (x - 1)^2 / 3  = 30631250834960419227450344600217059328
+    const COFACTOR: &'static [u64] = &[0x0, 0x170b5d4430000000];
+
+    /// COFACTOR_INV = COFACTOR^{-1} mod r
+    /// = 5285428838741532253824584287042945485047145357130994810877
+    #[rustfmt::skip]
+    const COFACTOR_INV: Fr = field_new!(Fr, "5285428838741532253824584287042945485047145357130994810877");
+
+    /// AFFINE_GENERATOR_COEFFS = (GENERATOR_X, GENERATOR_Y)
+    const AFFINE_GENERATOR_COEFFS: (Self::BaseField, Self::BaseField) =
+        (TE_GENERATOR_X, TE_GENERATOR_Y);
+
+    type MontgomeryModelParameters = Parameters;
+
+    /// Multiplication by `a` is multiply by `-1`.
+    #[inline(always)]
+    fn mul_by_a(elem: &Self::BaseField) -> Self::BaseField {
+        elem.neg()
+    }
+}
+
+// BLS12-377::G1 also has a Montgomery form.
+// BLS12-377::G1 also has a twisted Edwards form.
+// It can be obtained via the following script, implementing
+// SW -> Montgomery transformation: https://en.wikipedia.org/wiki/Montgomery_curve
+// ``` sage
+//
+// # modulus
+// p=0x1ae3a4617c510eac63b05c06ca1493b1a22d9f300f5138f1ef3622fba094800170b5d44300000008508c00000000001
+// Fp=Zmod(p)
+//
+// #####################################################
+// # Weierstrass curve: y² = x³ + A * x + B
+// #####################################################
+// # curve y^2 = x^3 + 1
+// WA=Fp(0)
+// WB=Fp(1)
+//
+// #####################################################
+// # Montgomery curve: By² = x³ + A * x² + x
+// #####################################################
+// # root for x^3 + 1 = 0
+// alpha = -1
+// # s = 1 / (sqrt(3alpha^2 + a))
+// s = 1/(Fp(3).sqrt())
+//
+// # MA = 3 * alpha * s
+// MA=Fp(228097355113300204138531148905234651262148041026195375645000724271212049151994375092458297304264351187709081232384)
+// # MB = s
+// MB=Fp(10189023633222963290707194929886294091415157242906428298294512798502806398782149227503530278436336312243746741931)
+// ```
+impl MontgomeryModelParameters for Parameters {
+    /// COEFF_A = 228097355113300204138531148905234651262148041026195375645000724271212049151994375092458297304264351187709081232384
+    #[rustfmt::skip]
+    const COEFF_A: Fq = field_new!(Fq, "228097355113300204138531148905234651262148041026195375645000724271212049151994375092458297304264351187709081232384");
+
+    /// COEFF_B = 10189023633222963290707194929886294091415157242906428298294512798502806398782149227503530278436336312243746741931
+    #[rustfmt::skip]
+    const COEFF_B: Fq = field_new!(Fq, "10189023633222963290707194929886294091415157242906428298294512798502806398782149227503530278436336312243746741931");
+
+    type TEModelParameters = Parameters;
+}
+
 /// G1_GENERATOR_X =
 /// 81937999373150964239938255573465948239988671502647976594219695644855304257327692006745978603320413799295628339695
 #[rustfmt::skip]
@@ -49,3 +177,56 @@ pub const G1_GENERATOR_X: Fq = field_new!(Fq, "819379993731509642399382555734659
 /// 241266749859715473739788878240585681733927191168601896383759122102112907357779751001206799952863815012735208165030
 #[rustfmt::skip]
 pub const G1_GENERATOR_Y: Fq = field_new!(Fq, "241266749859715473739788878240585681733927191168601896383759122102112907357779751001206799952863815012735208165030");
+
+// The generator for twisted Edward form is the same SW generator converted into the normalized TE form (TE2).
+// ``` sage
+// # following scripts in previous section
+// #####################################################
+// # Weierstrass curve generator
+// #####################################################
+// Wx = Fp(81937999373150964239938255573465948239988671502647976594219695644855304257327692006745978603320413799295628339695)
+// Wy = Fp(241266749859715473739788878240585681733927191168601896383759122102112907357779751001206799952863815012735208165030)
+//
+// assert(Wy^2 - Wx^3 - WA * Wx - WB == 0)
+//
+// #####################################################
+// # Montgomery curve generator
+// #####################################################
+// # x = s * (x - alpha)
+// Mx = Fp(251803586774461569862800610331871502335378228972505599912537082323947581271784390797244487924068052270360793200630)
+// # y = s * y
+// My = Fp(77739247071951651095607889637653357561348174979132042929587539214321586851215673796661346812932566642719051699820)
+//
+// assert(MB * My^2 == Mx^3+ MA * Mx^2 + Mx)
+//
+// # #####################################################
+// # # Twisted Edwards curve 1 generator
+// # #####################################################
+// # x = Mx/My
+// TE1x = Fp(82241236807150726090333472814441006963902378430536027612759193445733851062772474760677400112551677454953925168208)
+// # y = (Mx - 1)/(Mx+1)
+// TE1y = Fp(6177051365529633638563236407038680211609544222665285371549726196884440490905471891908272386851767077598415378235)
+//
+// assert( TE1a * TE1x^2 + TE1y^2 == 1 + TE1d * TE1x^2 * TE1y^2 )
+//
+//
+// # #####################################################
+// # # Twisted Edwards curve 2 generator
+// # #####################################################
+// beta = (-TE1a).sqrt()
+// # x = TE1x * sqrt(-TE1a)
+// TE2x = Fp(71222569531709137229370268896323705690285216175189308202338047559628438110820800641278662592954630774340654489393)
+// # y = TE1y
+// TE2y = Fp(6177051365529633638563236407038680211609544222665285371549726196884440490905471891908272386851767077598415378235)
+//
+// assert( TE2a * TE2x^2 + TE2y^2 == 1 + TE2d * TE2x^2 * TE2y^2 )
+// ```
+/// TE_GENERATOR_X =
+/// 71222569531709137229370268896323705690285216175189308202338047559628438110820800641278662592954630774340654489393
+#[rustfmt::skip]
+pub const TE_GENERATOR_X: Fq = field_new!(Fq, "71222569531709137229370268896323705690285216175189308202338047559628438110820800641278662592954630774340654489393");
+
+/// TE_GENERATOR_Y =
+/// 6177051365529633638563236407038680211609544222665285371549726196884440490905471891908272386851767077598415378235
+#[rustfmt::skip]
+pub const TE_GENERATOR_Y: Fq = field_new!(Fq, "6177051365529633638563236407038680211609544222665285371549726196884440490905471891908272386851767077598415378235");

bls12_377/src/curves/mod.rs

@@ -31,3 +31,5 @@ pub type G1Affine = bls12::G1Affine<Parameters>;
 pub type G1Projective = bls12::G1Projective<Parameters>;
 pub type G2Affine = bls12::G2Affine<Parameters>;
 pub type G2Projective = bls12::G2Projective<Parameters>;
+
+pub use g1::{G1TEAffine, G1TEProjective};

bls12_377/src/curves/tests.rs

@@ -1,19 +1,22 @@
 #![allow(unused_imports)]
+use crate::{
+    g1, g2, Bls12_377, Fq, Fq12, Fq2, Fr, G1Affine, G1Projective, G1TEProjective, G2Affine,
+    G2Projective,
+};
+use ark_ec::{
+    models::SWModelParameters, short_weierstrass_jacobian, AffineCurve, PairingEngine,
+    ProjectiveCurve,
+};
 use ark_ff::{
     fields::{Field, FpParameters, PrimeField, SquareRootField},
     One, Zero,
 };
 use ark_serialize::CanonicalSerialize;
-use ark_std::test_rng;
-
-use ark_ec::{models::SWModelParameters, AffineCurve, PairingEngine, ProjectiveCurve};
-use ark_std::rand::Rng;
+use ark_std::{rand::Rng, test_rng};
 use core::ops::{AddAssign, MulAssign};
 
-use crate::{g1, g2, Bls12_377, Fq, Fq12, Fq2, Fr, G1Affine, G1Projective, G2Affine, G2Projective};
-
 use ark_algebra_test_templates::{
-    curves::{curve_tests, sw_tests},
+    curves::{curve_tests, edwards_tests, sw_tests},
     groups::group_test,
 };
 
@@ -22,6 +25,7 @@ fn test_g1_projective_curve() {
     curve_tests::<G1Projective>();
 
     sw_tests::<g1::Parameters>();
+    edwards_tests::<g1::Parameters>();
 }
 
 #[test]
@@ -30,6 +34,10 @@ fn test_g1_projective_group() {
     let a: G1Projective = rng.gen();
     let b: G1Projective = rng.gen();
     group_test(a, b);
+
+    let c = rng.gen();
+    let d = rng.gen();
+    group_test::<G1TEProjective>(c, d);
 }
 
 #[test]

bls12_377/src/fields/fr.rs

@@ -1,4 +1,4 @@
-///! Bls12-377 scalar field.
+//! Bls12-377 scalar field.
 ///
 /// Roots of unity computed from modulus and R using this sage code:
 ///
@@ -76,7 +76,8 @@ impl FpParameters for FrParameters {
 
     /// GENERATOR = 22
     /// Encoded in Montgomery form, so the value is
-    /// (22 * R) % q = 5642976643016801619665363617888466827793962762719196659561577942948671127251
+    /// (22 * R) % q =
+    /// 5642976643016801619665363617888466827793962762719196659561577942948671127251
     #[rustfmt::skip]
     const GENERATOR: BigInteger = BigInteger([
         2984901390528151251u64,

bls12_377/src/fields/tests.rs

@@ -7,8 +7,7 @@ use ark_ff::{
     One, UniformRand, Zero,
 };
 use ark_serialize::{buffer_bit_byte_size, CanonicalSerialize};
-use ark_std::rand::Rng;
-use ark_std::test_rng;
+use ark_std::{rand::Rng, test_rng};
 use core::{
     cmp::Ordering,
     ops::{AddAssign, MulAssign, SubAssign},

curve-benches/src/macros/field.rs

@@ -448,7 +448,7 @@ macro_rules! prime_field {
             let mut count = 0;
             b.iter(|| {
                 count = (count + 1) % SAMPLES;
-                $f::from(v[count]);
+                let _ = $f::from(v[count]);
             });
         }
     };