Dimming by holding switch not working by Tasmota with 4 circuits of white led spots

[joostvdw]

Can anybody help me?
I made a 4 circuits dimmer switch with Tasmota on a ESP8266 and a YYNMOS-4 as Mosfet. I use a 4-gang momentary switch. Almost everything works well: I split out the 4 circuits with: ¨ SetOption68 1". I can dim the 12V MR16 LedSpots very well after the command: "PwmFrequency 65". Dimming is possible in the web-interface, and also in HomeAssistant.

But i can not figure out dimming by holding the buttons.

And also not : "go to 100% on double click" . The double-click gives a very strange behaviour:
2x click on button-1: LedCircuit 2 Toggles
2x click on button-2: LedCircuit 3 Toggles
2x click on button-3: LedCircuit 4 Toggles
2x click on button-4: LedCircuit 1 Toggles

I have really tried everything, but nothing works. It drives me crazy...

Can anybody help me?

Joost from Belgium

P.S.
I struggled a lot which PIN's to take: Finally I made it so:
GPIO5, D1, PWM 1
GPIO4 , D2, PWM 2
GPIO14 , D5, PWM 3
GPIO12, D6, PWM 4

GPIO2 , D4, Button 1
GPIO13 , D7, Button 2
GPIO15 , D8, Button 3, You have to add a resistor of 10KOhm, from D8 to 3V.
GPIO3, RX, Button 4, You have to give the command: "SerialLog 0"

[sfromis]

What you want to do is not supported by Tasmota for SetOption68 channels. It might be possible to try to do it with complicated rules, but far from simple to manage. With ESP8266, you do not have access to the Berry language, but the scripter feature does provide better programming options than rules. Still not an easy thing to do.

[joostvdw]

Thanks a lot, Sfromis, You helped me a lot! I ordered a more recent type of ESP, the C32 mini. With possibility of berry scripts. Within a few weeks I'll try to write the berry script. Does anybody have that done already ? for these 4 dimming buttons ?