update from 201911

.gitignore

@@ -162,3 +162,16 @@ src/**/debian/stamp-autotools-files
 
 # .o files
 src/**/*.o
+
+# platform
+platform/**/*.egg-info
+platform/**/*-none-any.whl
+platform/**/.pybuild
+platform/**/debian/*
+platform/**/build
+platform/broadcom/sonic-platform-modules-dell/s5232f/sonic_platform/ipmihelper.py
+platform/broadcom/sonic-platform-modules-dell/s6100/modules/dell_ich.c
+platform/broadcom/sonic-platform-modules-dell/s6100/modules/dell_s6100_lpc.c
+platform/broadcom/sonic-platform-modules-dell/z9100/modules/dell_ich.c
+platform/broadcom/sonic-platform-modules-dell/z9100/modules/dell_mailbox.c
+platform/broadcom/sonic-platform-modules-dell/z9264f/sonic_platform/ipmihelper.py

Makefile.work

@@ -169,7 +169,7 @@ SONIC_BUILD_INSTRUCTION :=  make \
                            INSTALL_KUBERNETES=$(INSTALL_KUBERNETES) \
                            KUBERNETES_VERSION=$(KUBERNETES_VERSION) \
                            K8s_GCR_IO_PAUSE_VERSION=$(K8s_GCR_IO_PAUSE_VERSION) \
-                           K8s_CNI_CALICO_VERSION=$(K8s_CNI_CALICO_VERSION) \
+                           K8s_CNI_FLANNEL_VERSION=$(K8s_CNI_FLANNEL_VERSION) \
                            SONIC_ENABLE_PFCWD_ON_START=$(ENABLE_PFCWD_ON_START) \
                            SONIC_ENABLE_SYNCD_RPC=$(ENABLE_SYNCD_RPC) \
                            SONIC_INSTALL_DEBUG_TOOLS=$(INSTALL_DEBUG_TOOLS) \
@@ -252,8 +252,8 @@ reset :
 	        fi
 	        git clean -xfdf;
 	        git reset --hard;
-	        git submodule foreach --recursive git clean -xfdf;
-	        git submodule foreach --recursive git reset --hard;
+	        git submodule foreach --recursive 'git clean -xfdf || true';
+	        git submodule foreach --recursive 'git reset --hard || true';
 	        git submodule update --init --recursive;
 	        echo "Reset complete!";
 	    else

build_debian.sh

@@ -165,6 +165,10 @@ sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/scripts/init-premount/arista-
 sudo cp files/initramfs-tools/resize-rootfs $FILESYSTEM_ROOT/etc/initramfs-tools/scripts/init-premount/resize-rootfs
 sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/scripts/init-premount/resize-rootfs
 
+# Hook into initramfs: run fsck to repair a non-clean filesystem prior to be mounted
+sudo cp files/initramfs-tools/fsck-rootfs $FILESYSTEM_ROOT/etc/initramfs-tools/scripts/init-premount/fsck-rootfs
+sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/scripts/init-premount/fsck-rootfs
+
 ## Hook into initramfs: after partition mount and loop file mount
 ## 1. Prepare layered file system
 ## 2. Bind-mount docker working directory (docker overlay storage cannot work over overlay rootfs)
@@ -200,7 +204,7 @@ sudo LANG=C chroot $FILESYSTEM_ROOT rm /tmp/docker.gpg
 sudo LANG=C chroot $FILESYSTEM_ROOT add-apt-repository \
                                     "deb [arch=$CONFIGURED_ARCH] https://download.docker.com/linux/debian stretch stable"
 sudo LANG=C chroot $FILESYSTEM_ROOT apt-get update
-sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install docker-ce=${DOCKER_VERSION}
+sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install docker-ce=${DOCKER_VERSION} docker-ce-cli=${DOCKER_VERSION}
 sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y remove software-properties-common gnupg2
 
 if [ "$INSTALL_KUBERNETES" == "y" ]
@@ -213,6 +217,14 @@ then
     ## Check out the sources list update matches current Debian version
     sudo cp files/image_config/kubernetes/kubernetes.list $FILESYSTEM_ROOT/etc/apt/sources.list.d/
     sudo LANG=C chroot $FILESYSTEM_ROOT apt-get update
+    if [[ $KUBERNETES_VERSION == 1.18.0 ]]; then 
+        # kubeadm 1.18.0 package auto install has some dependency error so install
+        # those package explicitly.
+        sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install kubernetes-cni=0.7.5-00
+        sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install kubelet=1.18.3-00
+        sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install kubectl=1.18.3-00
+    fi
+    # else kubeadm package auto install kubelet & kubectl
     sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install kubeadm=${KUBERNETES_VERSION}-00
     # kubeadm package auto install kubelet & kubectl
 else
@@ -362,59 +374,27 @@ EOF
 sudo sed -i 's/^ListenAddress ::/#ListenAddress ::/' $FILESYSTEM_ROOT/etc/ssh/sshd_config
 sudo sed -i 's/^#ListenAddress 0.0.0.0/ListenAddress 0.0.0.0/' $FILESYSTEM_ROOT/etc/ssh/sshd_config
 
-## Config sysctl
 sudo mkdir -p $FILESYSTEM_ROOT/var/core
+
+# Config sysctl
 sudo augtool --autosave "
 set /files/etc/sysctl.conf/kernel.core_pattern '|/usr/bin/coredump-compress %e %t %p'
-
 set /files/etc/sysctl.conf/kernel.softlockup_panic 1
 set /files/etc/sysctl.conf/kernel.panic 10
 set /files/etc/sysctl.conf/vm.panic_on_oom 2
 set /files/etc/sysctl.conf/fs.suid_dumpable 2
-
-set /files/etc/sysctl.conf/net.ipv4.conf.default.forwarding 1
-set /files/etc/sysctl.conf/net.ipv4.conf.all.forwarding 1
-set /files/etc/sysctl.conf/net.ipv4.conf.eth0.forwarding 0
-
-set /files/etc/sysctl.conf/net.ipv4.conf.default.arp_accept 0
-set /files/etc/sysctl.conf/net.ipv4.conf.default.arp_announce 0
-set /files/etc/sysctl.conf/net.ipv4.conf.default.arp_filter 0
-set /files/etc/sysctl.conf/net.ipv4.conf.default.arp_notify 0
-set /files/etc/sysctl.conf/net.ipv4.conf.default.arp_ignore 0
-set /files/etc/sysctl.conf/net.ipv4.conf.all.arp_accept 0
-set /files/etc/sysctl.conf/net.ipv4.conf.all.arp_announce 1
-set /files/etc/sysctl.conf/net.ipv4.conf.all.arp_filter 0
-set /files/etc/sysctl.conf/net.ipv4.conf.all.arp_notify 1
-set /files/etc/sysctl.conf/net.ipv4.conf.all.arp_ignore 2
-
-set /files/etc/sysctl.conf/net.ipv4.neigh.default.base_reachable_time_ms 1800000
-set /files/etc/sysctl.conf/net.ipv6.neigh.default.base_reachable_time_ms 1800000
-set /files/etc/sysctl.conf/net.ipv4.neigh.default.gc_thresh1 1024
-set /files/etc/sysctl.conf/net.ipv6.neigh.default.gc_thresh1 1024
-set /files/etc/sysctl.conf/net.ipv4.neigh.default.gc_thresh2 2048
-set /files/etc/sysctl.conf/net.ipv6.neigh.default.gc_thresh2 2048
-set /files/etc/sysctl.conf/net.ipv4.neigh.default.gc_thresh3 4096
-set /files/etc/sysctl.conf/net.ipv6.neigh.default.gc_thresh3 4096
-
-set /files/etc/sysctl.conf/net.ipv6.conf.default.forwarding 1
-set /files/etc/sysctl.conf/net.ipv6.conf.all.forwarding 1
-set /files/etc/sysctl.conf/net.ipv6.conf.eth0.forwarding 0
-
-set /files/etc/sysctl.conf/net.ipv6.conf.default.accept_dad 0
-set /files/etc/sysctl.conf/net.ipv6.conf.all.accept_dad 0
-set /files/etc/sysctl.conf/net.ipv6.conf.eth0.accept_dad 0
-
-set /files/etc/sysctl.conf/net.ipv6.conf.default.keep_addr_on_down 1
-set /files/etc/sysctl.conf/net.ipv6.conf.all.keep_addr_on_down 1
-set /files/etc/sysctl.conf/net.ipv6.conf.eth0.keep_addr_on_down 1
-
-set /files/etc/sysctl.conf/net.ipv4.tcp_l3mdev_accept 1
-set /files/etc/sysctl.conf/net.ipv4.udp_l3mdev_accept 1
-
-set /files/etc/sysctl.conf/net.core.rmem_max 2097152
-set /files/etc/sysctl.conf/net.core.wmem_max 2097152
 " -r $FILESYSTEM_ROOT
 
+sysctl_net_cmd_string=""
+while read line; do
+  [[ "$line" =~ ^#.*$ ]] && continue
+  sysctl_net_conf_key=`echo $line | awk -F '=' '{print $1}'`
+  sysctl_net_conf_value=`echo $line | awk -F '=' '{print $2}'`
+  sysctl_net_cmd_string=$sysctl_net_cmd_string"set /files/etc/sysctl.conf/$sysctl_net_conf_key $sysctl_net_conf_value"$'\n'
+done < files/image_config/sysctl/sysctl-net.conf
+
+sudo augtool --autosave "$sysctl_net_cmd_string" -r $FILESYSTEM_ROOT
+
 if [[ $CONFIGURED_ARCH == amd64 ]]; then
     # Configure mcelog to log machine checks to syslog
     sudo sed -i 's/^#syslog = yes/syslog = yes/' $FILESYSTEM_ROOT/etc/mcelog/mcelog.conf

device/arista/x86_64-arista_7050_qx32/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7050_qx32s/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7050cx3_32s/Arista-7050CX3-32S-C32/td3-a7050cx3-32s-32x100G.config.bcm

@@ -35,7 +35,6 @@ port_phy_addr=0xff
 robust_hash_disable_egress_vlan=1
 robust_hash_disable_mpls=1
 robust_hash_disable_vlan=1
-sram_scan_enable=0
 stable_size=0x5500000
 tdma_timeout_usec=15000000
 tslam_timeout_usec=15000000

device/arista/x86_64-arista_7050cx3_32s/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7060_cx32s/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7060cx2_32s/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7060px4_32/Arista-7060PX4-C64/th3-a7060px4-32-64x100G.config.bcm

@@ -872,7 +872,6 @@ port_phy_addr_147.0=0xff
 robust_hash_disable_egress_vlan.0=1
 robust_hash_disable_mpls.0=1
 robust_hash_disable_vlan.0=1
-sram_scan_enable.0=0
 tdma_timeout_usec.0=15000000
 tslam_timeout_usec.0=15000000
 

device/arista/x86_64-arista_7060px4_32/Arista-7060PX4-O32/th3-a7060px4-o32-32x400G.config.bcm

@@ -744,7 +744,6 @@ port_phy_addr_143.0=0xff
 robust_hash_disable_egress_vlan.0=1
 robust_hash_disable_mpls.0=1
 robust_hash_disable_vlan.0=1
-sram_scan_enable.0=0
 tdma_timeout_usec.0=15000000
 tslam_timeout_usec.0=15000000
 

device/arista/x86_64-arista_7060px4_32/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7170_32c/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7170_32cd/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7170_64c/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7260cx3_64/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_7280cr3_32p4/pmon_daemon_control.json

@@ -0,0 +1 @@
+../x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

device/arista/x86_64-arista_common/pmon_daemon_control_skip_thermalctld.json

@@ -0,0 +1,4 @@
+{
+    "skip_thermalctld": true
+}
+

device/barefoot/x86_64-accton_as9516bf_32d-r0/pmon_daemon_control.json

@@ -1,6 +1,8 @@
 {
+    "skip_thermalctld": true,
+    "skip_fancontrol": true,
     "skip_ledd": true,
     "skip_xcvrd": false,
     "skip_psud": false,
-    "skip_syseepromd": false 
+    "skip_syseepromd": false
 }

device/barefoot/x86_64-accton_wedge100bf_32x-r0/pmon_daemon_control.json

@@ -1,6 +1,8 @@
 {
+    "skip_thermalctld": true,
+    "skip_fancontrol": true,
     "skip_ledd": true,
     "skip_xcvrd": false,
     "skip_psud": false,
-    "skip_syseepromd": false 
+    "skip_syseepromd": false
 }

device/barefoot/x86_64-accton_wedge100bf_65x-r0/pmon_daemon_control.json

@@ -1,6 +1,8 @@
 {
+    "skip_thermalctld": true,
+    "skip_fancontrol": true,
     "skip_ledd": true,
     "skip_xcvrd": false,
     "skip_psud": false,
-    "skip_syseepromd": false 
+    "skip_syseepromd": false
 }

device/celestica/x86_64-cel_seastone-r0/fancontrol-B2F

@@ -0,0 +1,11 @@
+# Configuration file generated by pwmconfig, changes will be lost
+INTERVAL=2
+FCTEMPS=13-002e/pwm1=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-002e/pwm2=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-002e/pwm3=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-002e/pwm4=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-002e/pwm5=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-004d/pwm1=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-004d/pwm2=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-004d/pwm3=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-004d/pwm4=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input 13-004d/pwm5=/sys/bus/i2c/devices/15-004e/hwmon/hwmon*/temp1_input
+FCFANS=13-004d/pwm5=13-004d/fan5_input 13-004d/pwm4=13-004d/fan4_input 13-004d/pwm3=13-004d/fan3_input 13-004d/pwm2=13-004d/fan2_input 13-004d/pwm1=13-004d/fan1_input 13-002e/pwm5=13-002e/fan5_input 13-002e/pwm4=13-002e/fan4_input 13-002e/pwm3=13-002e/fan3_input 13-002e/pwm2=13-002e/fan2_input 13-002e/pwm1=13-002e/fan1_input
+MINTEMP=13-002e/pwm1=27 13-002e/pwm2=27 13-002e/pwm3=27 13-002e/pwm4=27 13-002e/pwm5=27 13-004d/pwm1=27 13-004d/pwm2=27 13-004d/pwm3=27 13-004d/pwm4=27 13-004d/pwm5=27
+MAXTEMP=13-002e/pwm1=46 13-002e/pwm2=46 13-002e/pwm3=46 13-002e/pwm4=46 13-002e/pwm5=46 13-004d/pwm1=46 13-004d/pwm2=46 13-004d/pwm3=46 13-004d/pwm4=46 13-004d/pwm5=46
+MINSTART=13-002e/pwm1=89 13-002e/pwm2=89 13-002e/pwm3=89 13-002e/pwm4=89 13-002e/pwm5=89 13-004d/pwm1=89 13-004d/pwm2=89 13-004d/pwm3=89 13-004d/pwm4=89 13-004d/pwm5=89
+MINSTOP=13-002e/pwm1=89 13-002e/pwm2=89 13-002e/pwm3=89 13-002e/pwm4=89 13-002e/pwm5=89 13-004d/pwm1=89 13-004d/pwm2=89 13-004d/pwm3=89 13-004d/pwm4=89 13-004d/pwm5=89
+MINPWM=13-002e/pwm1=89 13-002e/pwm2=89 13-002e/pwm3=89 13-002e/pwm4=89 13-002e/pwm5=89 13-004d/pwm1=89 13-004d/pwm2=89 13-004d/pwm3=89 13-004d/pwm4=89 13-004d/pwm5=89
+MAXPWM=13-002e/pwm1=255 13-002e/pwm2=255 13-002e/pwm3=255 13-002e/pwm4=255 13-002e/pwm5=255 13-004d/pwm1=255 13-004d/pwm2=255 13-004d/pwm3=255 13-004d/pwm4=255 13-004d/pwm5=255
+THYST=13-002e/pwm1=3 13-002e/pwm2=3 13-002e/pwm3=3 13-002e/pwm4=3 13-002e/pwm5=3 13-004d/pwm1=3 13-004d/pwm2=3 13-004d/pwm3=3 13-004d/pwm4=3 13-004d/pwm5=3

device/celestica/x86_64-cel_seastone-r0/fancontrol-F2B

@@ -0,0 +1,12 @@
+# Configuration file generated by pwmconfig, changes will be lost
+INTERVAL=2
+FCTEMPS=13-002e/pwm1=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-002e/pwm2=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-002e/pwm3=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-002e/pwm4=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-002e/pwm5=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-004d/pwm1=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-004d/pwm2=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-004d/pwm3=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-004d/pwm4=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input 13-004d/pwm5=/sys/bus/i2c/devices/5-0048/hwmon/hwmon*/temp1_input
+FCFANS=13-004d/pwm5=13-004d/fan5_input 13-004d/pwm4=13-004d/fan4_input 13-004d/pwm3=13-004d/fan3_input 13-004d/pwm2=13-004d/fan2_input 13-004d/pwm1=13-004d/fan1_input 13-002e/pwm5=13-002e/fan5_input 13-002e/pwm4=13-002e/fan4_input 13-002e/pwm3=13-002e/fan3_input 13-002e/pwm2=13-002e/fan2_input 13-002e/pwm1=13-002e/fan1_input
+MINTEMP=13-002e/pwm1=26 13-002e/pwm2=26 13-002e/pwm3=26 13-002e/pwm4=26 13-002e/pwm5=26 13-004d/pwm1=26 13-004d/pwm2=26 13-004d/pwm3=26 13-004d/pwm4=26 13-004d/pwm5=26
+MAXTEMP=13-002e/pwm1=45 13-002e/pwm2=45 13-002e/pwm3=45 13-002e/pwm4=45 13-002e/pwm5=45 13-004d/pwm1=45 13-004d/pwm2=45 13-004d/pwm3=45 13-004d/pwm4=45 13-004d/pwm5=45
+MINSTART=13-002e/pwm1=89 13-002e/pwm2=89 13-002e/pwm3=89 13-002e/pwm4=89 13-002e/pwm5=89 13-004d/pwm1=89 13-004d/pwm2=89 13-004d/pwm3=89 13-004d/pwm4=89 13-004d/pwm5=89
+MINSTOP=13-002e/pwm1=89 13-002e/pwm2=89 13-002e/pwm3=89 13-002e/pwm4=89 13-002e/pwm5=89 13-004d/pwm1=89 13-004d/pwm2=89 13-004d/pwm3=89 13-004d/pwm4=89 13-004d/pwm5=89
+MINPWM=13-002e/pwm1=89 13-002e/pwm2=89 13-002e/pwm3=89 13-002e/pwm4=89 13-002e/pwm5=89 13-004d/pwm1=89 13-004d/pwm2=89 13-004d/pwm3=89 13-004d/pwm4=89 13-004d/pwm5=89
+MAXPWM=13-002e/pwm1=255 13-002e/pwm2=255 13-002e/pwm3=255 13-002e/pwm4=255 13-002e/pwm5=255 13-004d/pwm1=255 13-004d/pwm2=255 13-004d/pwm3=255 13-004d/pwm4=255 13-004d/pwm5=255
+THYST=13-002e/pwm1=3 13-002e/pwm2=3 13-002e/pwm3=3 13-002e/pwm4=3 13-002e/pwm5=3 13-004d/pwm1=3 13-004d/pwm2=3 13-004d/pwm3=3 13-004d/pwm4=3 13-004d/pwm5=3
+

device/dell/x86_64-dell_s6000_s1220-r0/plugins/eeprom.py

@@ -10,13 +10,21 @@
 #############################################################################
 
 try:
-    from sonic_eeprom import eeprom_tlvinfo
-except ImportError, e:
-    raise ImportError (str(e) + "- required module not found")
+    from sonic_eeprom.eeprom_tlvinfo import TlvInfoDecoder
+    from sonic_platform.eeprom import EepromS6000
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
 
 
-class board(eeprom_tlvinfo.TlvInfoDecoder):
+class board(object):
 
-    def __init__(self, name, path, cpld_root, ro):
-        self.eeprom_path = "/sys/class/i2c-adapter/i2c-10/10-0053/eeprom"
-        super(board, self).__init__(self.eeprom_path, 0, '', True)
+    def __new__(cls, name, path, cpld_root, ro):
+        eeprom_path = "/sys/class/i2c-adapter/i2c-10/10-0053/eeprom"
+
+        with open("/sys/class/dmi/id/product_name", "r") as fd:
+            board_type = fd.read()
+
+        if 'S6000-ON' in board_type:
+            return TlvInfoDecoder(eeprom_path, 0, '', True)
+        else:
+            return EepromS6000(is_plugin=True)

device/dell/x86_64-dell_s6000_s1220-r0/pmon_daemon_control.json

@@ -1,3 +1,4 @@
 {
-    "skip_ledd": true
+    "skip_ledd": true,
+    "skip_thermalctld": true
 }

device/dell/x86_64-dell_s6000_s1220-r0/sensors.conf

@@ -7,8 +7,8 @@
 # tmp75-i2c-11-4e is an ambient temperature sensor.
 
 chip "tmp75-*"
-     set temp1_max 50
-     set temp1_max_hyst 25
+     set temp1_max 80
+     set temp1_max_hyst 70
 
 # emc1403-i2c-10-4d has following temperature sensors:
 # temp1: CPU0 external Temp Sensor
@@ -32,5 +32,5 @@ chip "jc42-*"
      set temp1_crit 85
 
 chip "dni_dps460-*"
-     set temp1_max 50
-     set temp2_max 50
+     set temp1_max 80
+     set temp2_max 80

device/dell/x86_64-dell_s6100_c2538-r0/pmon_daemon_control.json

@@ -1,3 +1,4 @@
 {
-    "skip_ledd": true
+    "skip_ledd": true,
+    "skip_thermalctld": true
 }

device/dell/x86_64-dell_z9100_c2538-r0/pmon_daemon_control.json

@@ -1,3 +1,4 @@
 {
-    "skip_ledd": true
+    "skip_ledd": true,
+    "skip_thermalctld": true
 }

device/dell/x86_64-dellemc_s5232f_c3538-r0/DellEMC-S5232f-C8D48/buffers.json.j2

@@ -0,0 +1,2 @@
+{%- set default_topo = 't1' %}
+{%- include 'buffers_config.j2' %}