add script to check the cpu env #6291
There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,261 @@ | ||
| #!/bin/bash | ||
|
|
||
| if [ "`uname -s`" != "Linux" ]; then | ||
| echo "Current scenario only support in Linux yet!" | ||
| exit 0 | ||
| fi | ||
|
|
||
| echo "========================= Hardware Information =========================" | ||
| sockets=`grep 'physical id' /proc/cpuinfo | sort -u | wc -l` | ||
| cores_per_socket=`grep 'core id' /proc/cpuinfo | sort -u | wc -l` | ||
| ht=`lscpu |grep "per core" |awk -F':' '{print $2}'|xargs` | ||
| physical_cores=$((sockets * cores_per_socket)) | ||
| virtual_cores=`grep 'processor' /proc/cpuinfo | sort -u | wc -l` | ||
| numa_nodes=`lscpu |grep "NUMA node(s)"|awk -F':' '{print $2}'|xargs` | ||
| echo "CPU Name : `cat /proc/cpuinfo |grep -i "model name" |uniq |awk -F ':' '{print $2}'|xargs`" | ||
| echo "CPU Family : `lscpu |grep \"CPU family\" |awk -F':' '{print $2}'|xargs`" | ||
| echo "Socket Number : $sockets" | ||
| echo "Cores Per Socket : $cores_per_socket" | ||
| echo "Total Physical Cores : $physical_cores" | ||
| echo "Total Virtual Cores : $virtual_cores" | ||
| if [ $ht -eq 1 ]; then | ||
| echo "Hyper Threading : OFF" | ||
| if [ $physical_cores -ne $virtual_cores ]; then | ||
| echo "Error: HT logical error" | ||
| fi | ||
| else | ||
| echo "Hyper Threading : ON" | ||
| if [ $physical_cores -ge $virtual_cores ]; then | ||
| echo "Error: HT logical error" | ||
| fi | ||
| fi | ||
| echo "NUMA Nodes : $numa_nodes" | ||
| if [ $numa_nodes -lt $sockets ]; then | ||
| echo "Warning: NUMA node is not enough for the best performance,\ | ||
| at least $sockets" | ||
| fi | ||
|
|
||
| echo "-------------------------- Memory Information --------------------------" | ||
| # dmidecode support start from 2.11 | ||
| dmi_ver=`dmidecode --version|awk -F '.' '{print $1}'|xargs` | ||
| if [ $dmi_ver -lt 2 ]; then | ||
| echo "Error: dmidecode unknown or version is too old" | ||
| exit 0 | ||
| fi | ||
| if [ `dmidecode | grep -ic "Permission denied"` -ne 0 ]; then | ||
| echo "Error: need root to run dmidecode" | ||
| exit 0 | ||
| fi | ||
| max_dimms=0 | ||
| num_dimms_installed=0 | ||
| for dimm_id in `dmidecode |grep Locator|sort -u | awk -F ':' '{print $2}'`; do | ||
| num_refered=`dmidecode |grep -wc "$dimm_id"` | ||
| # the actual dimm id should be refered only once | ||
| if [ $num_refered -eq 1 ]; then | ||
| num_unknown=`dmidecode | awk '/'$dimm_id'/ {s=1; f=0}; | ||
| /Unknown/ {f=1}; | ||
| /Manufacturer/ {if (s==1) {print f; exit 0;}};'` | ||
| if [ $num_unknown -eq 0 ]; then | ||
| dimms_installed="$dimms_installed \n $dimm_id" | ||
| ((num_dimms_installed++)) | ||
| else | ||
| dimms_uninstalled="$dimms_uninstalled \n $dimm_id" | ||
| fi | ||
| ((max_dimms++)) | ||
| fi | ||
| done | ||
| echo "Installed DIMM number : $num_dimms_installed" | ||
| num_dimms_mapped=`dmidecode | grep "Memory Device Mapped" | wc -l` | ||
| if [ $num_dimms_installed -ne $num_dimms_mapped ]; then | ||
| echo "Error: The installed DIMMs number does ont match the mapped memory device: $num_dimms_mapped" | ||
| fi | ||
| num_clock_configed=`dmidecode | grep -i "Configured Clock Speed" |grep -ic "Hz"` | ||
| if [ $num_dimms_installed -ne $num_clock_configed ]; then | ||
| echo "Error: The installed DIMMs number does ont match configured clocks: $num_clock_configed" | ||
| fi | ||
| echo -e "Installed DIMMs Locator: $dimms_installed" | ||
| echo -e "Not installed DIMMs : $dimms_uninstalled" | ||
| max_dimm_slots=`dmidecode | grep -c "Bank Locator"` | ||
| echo "DIMMs max slots : $max_dimm_slots" | ||
| if [ $max_dimms -ne $max_dimm_slots ]; then | ||
| echo "Error: The max dimm slots do not match the max dimms: $max_dimms" | ||
| fi | ||
| free_ver_main=`free -V|awk -F ' ' '{print $NF}'|awk -F '.' '{print $1}'` | ||
| free_ver_sub=`free -V|awk -F ' ' '{print $NF}'|awk -F '.' '{print $2}'` | ||
| if [ $free_ver_main -lt 3 ] || [ $free_ver_sub -lt 3 ]; then | ||
| mem_sz=`free |grep -i mem |awk -F' ' '{print $2}'|xargs` | ||
| swap_sz=`free |grep -i swap |awk -F' ' '{print $2}'|xargs` | ||
| total_sz=`free -t |grep -i total |tail -n 1| awk -F' ' '{print $2}'|xargs` | ||
| mem_sz="`awk 'BEGIN{printf "%.1f\n",('$mem_sz'/1024/1024)}'` GB" | ||
| swap_sz="`awk 'BEGIN{printf "%.1f\n",('$swap_sz'/1024/1024)}'` GB" | ||
| total_sz="`awk 'BEGIN{printf "%.1f\n",('$total_sz'/1024/1024)}'` GB" | ||
| else | ||
| mem_sz=`free -h |grep -i mem |awk -F' ' '{print $2}'|xargs` | ||
| swap_sz=`free -h |grep -i swap |awk -F' ' '{print $2}'|xargs` | ||
| total_sz=`free -th |grep -i total |tail -n 1| awk -F' ' '{print $2}'|xargs` | ||
| fi | ||
| echo "Memory Size : $mem_sz" | ||
| echo "Swap Memory Size : $swap_sz" | ||
| echo "Total Memory Size : $total_sz" | ||
| echo "Max Memory Capacity : `dmidecode |grep -i \"maximum capacity\"|sort -u|awk -F':' '{print $2}'|xargs`" | ||
| # DIMMs fequency | ||
| clock_speeds=`dmidecode | grep -i "Configured Clock Speed" | grep -i "Hz" |sort -u | awk -F':' '{print $2}'|xargs` | ||
| echo "Configed Clock Speed : $clock_speeds" | ||
| num_clock_type=`dmidecode | grep -i "Configured Clock Speed" | grep -i "Hz" |sort -u | wc -l` | ||
| if [ $num_clock_type -ne 1 ]; then | ||
| echo "Warning: Have more than 1 speed type, all DIMMs should have same fequency: $clock_speeds" | ||
| fi | ||
|
|
||
| echo "-------------------------- Turbo Information --------------------------" | ||
| scaling_drive=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver` | ||
| echo "Scaling Driver : $scaling_drive" | ||
| if [ $scaling_drive == "intel_pstate" ] && [ -e /sys/devices/system/cpu/intel_pstate/no_turbo ]; then | ||
| turbo=`cat /sys/devices/system/cpu/intel_pstate/no_turbo` | ||
| if [ $turbo -eq 1 ]; then | ||
| echo "Turbo Status : OFF" | ||
| else | ||
| echo "Turbo Status : ON" | ||
| fi | ||
| else | ||
| echo "Warning: Scaling driver is not intel_pstarte, maybe should enable it in BIOS" | ||
| echo "Turbo Status : Unknown" | ||
| fi | ||
| # cpu frequency | ||
| num_max_freq=`cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq| sort -u |wc -l` | ||
| num_min_freq=`cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq| sort -u |wc -l` | ||
| if [ $num_max_freq -ne 1 ]; then | ||
| echo "Error: the max_frequency of all CPU should be equal" | ||
| fi | ||
| if [ $num_min_freq -ne 1 ]; then | ||
| echo "Error: the min_frequency of all CPU should be equal" | ||
| fi | ||
| max_freq=`cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq| uniq|xargs` # kHz | ||
| max_freq=`awk 'BEGIN{printf "%.2f",('$max_freq' / 1000000)}'` # GHz | ||
| min_freq=`cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq| uniq|xargs` # kHz | ||
| min_freq=`awk 'BEGIN{printf "%.2f",('$min_freq' / 1000000)}'` # GHz | ||
| echo "CPU Max Frequency : $max_freq GHz" | ||
| echo "CPU Min Frequency : $min_freq GHz" | ||
| # cpu governor | ||
| num_governor=`cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor| sort -u |wc -l` | ||
| if [ $num_governor -ne 1 ]; then | ||
| echo "Error: the governor of all CPU should be the same" | ||
| fi | ||
| governor=`cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor| sort -u |uniq` | ||
| echo "CPU Freq Governor : $governor" | ||
|
|
||
|
|
||
| echo "========================= Software Information =========================" | ||
| echo "BIOS Release Date : `dmidecode | grep "Release Date"|awk -F ':' '{print $2}'|xargs`" | ||
| echo "OS Version : `cat /etc/redhat-release`" | ||
| echo "Kernel Release Version : `uname -r`" | ||
| echo "Kernel Patch Version : `uname -v`" | ||
| echo "GCC Version :`gcc --version | head -n 1|awk -F '\\\(GCC\\\)' '{print $2}'`" | ||
| if command -v cmake >/dev/null 2>&1; then | ||
| cmake_ver=`cmake --version | head -n 1 | awk -F 'version' '{print $2}'` | ||
| else | ||
| cmake_ver=" Not installed" | ||
| fi | ||
| echo "CMake Version :$cmake_ver" | ||
| echo "------------------ Environment Variables Information -------------------" | ||
| kmp_affinity=`env | grep KMP_AFFINITY` | ||
| omp_dynamic=`env | grep OMP_DYNAMIC` | ||
| omp_nested=`env | grep OMP_NESTED` | ||
| omp_num_threads=`env | grep OMP_NUM_THREADS` | ||
| mkl_num_threads=`env | grep MKL_NUM_THREADS` | ||
| mkl_dynamic=`env | grep MKL_DYNAMIC` | ||
| if [ ! $kmp_affinity ]; then kmp_affinity="unset"; fi | ||
| if [ ! $omp_dynamic ]; then omp_dynamic="unset"; fi | ||
| if [ ! $omp_nested ]; then omp_nested="unset"; fi | ||
| if [ ! $omp_num_threads ]; then omp_num_threads="unset"; fi | ||
| if [ ! $mkl_num_threads ]; then mkl_num_threads="unset"; fi | ||
| if [ ! $mkl_dynamic ]; then mkl_dynamic="unset"; fi | ||
| echo "KMP_AFFINITY : $kmp_affinity" | ||
| echo "OMP_DYNAMIC : $omp_dynamic" | ||
| echo "OMP_NESTED : $omp_nested" | ||
| echo "OMP_NUM_THREADS : $omp_num_threads" | ||
| echo "MKL_NUM_THREADS : $mkl_num_threads" | ||
| echo "MKL_DYNAMIC : $mkl_dynamic" | ||
| # Check if any MKL related libraries have been installed in LD_LIBRARY_PATH | ||
| for path in `echo $LD_LIBRARY_PATH | awk -F ':' '{for(i=1;i<=NF;++i)print $i}'`; do | ||
| mkldnn_found=`find $path -name "libmkldnn.so"` | ||
| if [ "$mkldnn_found" ]; then | ||
| echo "Found MKL-DNN : $mkldnn_found" | ||
| fi | ||
| mklml_found=`find $path -name "libmklml_intel.so"` | ||
| if [ "$mklml_found" ]; then | ||
| echo "Found MKLML : $mklml_found" | ||
| fi | ||
| iomp_found=`find $path -name "libiomp5.so"` | ||
| if [ "$iomp_found" ]; then | ||
| echo "Found IOMP : $iomp_found" | ||
| fi | ||
| done | ||
|
|
||
| # dump all details for fully check | ||
| lscpu > lscpu.dump | ||
| dmidecode > dmidecode.dump | ||
|
Contributor
There was a problem hiding this comment. 可以在脚本后面列一下正确的输出么？
Contributor
Author
There was a problem hiding this comment. 没有完全正确的输出，因为不同平台需要的结果可能不一样。 |
||
|
|
||
| # The expected result would be like: | ||
| # ========================= Hardware Information ========================= | ||
| # CPU Name : Intel(R) Xeon(R) Gold 6148M CPU @ 2.40GHz | ||
| # CPU Family : 6 | ||
| # Socket Number : 2 | ||
| # Cores Per Socket : 20 | ||
| # Total Physical Cores : 40 | ||
| # Total Virtual Cores : 40 | ||
| # Hyper Threading : OFF | ||
| # NUMA Nodes : 2 | ||
| # -------------------------- Memory Information -------------------------- | ||
| # Installed DIMM number : 12 | ||
| # Installed DIMMs Locator: | ||
| # CPU1_DIMM_A1 | ||
| # CPU1_DIMM_B1 | ||
| # CPU1_DIMM_C1 | ||
| # CPU1_DIMM_D1 | ||
| # CPU1_DIMM_E1 | ||
| # CPU1_DIMM_F1 | ||
| # CPU2_DIMM_A1 | ||
| # CPU2_DIMM_B1 | ||
| # CPU2_DIMM_C1 | ||
| # CPU2_DIMM_D1 | ||
| # CPU2_DIMM_E1 | ||
| # CPU2_DIMM_F1 | ||
| # Not installed DIMMs : | ||
| # CPU1_DIMM_A2 | ||
| # CPU1_DIMM_B2 | ||
| # CPU1_DIMM_C2 | ||
| # CPU1_DIMM_D2 | ||
| # CPU1_DIMM_E2 | ||
| # CPU1_DIMM_F2 | ||
| # CPU2_DIMM_A2 | ||
| # CPU2_DIMM_B2 | ||
| # CPU2_DIMM_C2 | ||
| # CPU2_DIMM_D2 | ||
| # CPU2_DIMM_E2 | ||
| # CPU2_DIMM_F2 | ||
| # DIMMs max slots : 24 | ||
| # Memory Size : 376G | ||
| # Swap Memory Size : 4.0G | ||
| # Total Memory Size : 380G | ||
| # Max Memory Capacity : 2304 GB | ||
| # Configed Clock Speed : 2666 MHz | ||
| # -------------------------- Turbo Information -------------------------- | ||
| # Scaling Driver : intel_pstate | ||
| # Turbo Status : ON | ||
| # CPU Max Frequency : 3.70 GHz | ||
| # CPU Min Frequency : 1.00 GHz | ||
| # CPU Freq Governor : performance | ||
| # ========================= Software Information ========================= | ||
| # BIOS Release Date : 03/10/2017 | ||
| # OS Version : CentOS Linux release 7.3.1611 (Core) | ||
| # Kernel Release Version : 3.10.0-514.el7.x86_64 | ||
| # Kernel Patch Version : #1 SMP Tue Nov 22 16:42:41 UTC 2016 | ||
| # GCC Version : 4.8.5 20150623 (Red Hat 4.8.5-11) | ||
| # CMake Version : 3.5.2 | ||
| # ------------------ Environment Variables Information ------------------- | ||
| # KMP_AFFINITY : unset | ||
| # OMP_DYNAMIC : unset | ||
| # OMP_NESTED : unset | ||
| # OMP_NUM_THREADS : unset | ||
| # MKL_NUM_THREADS : unset | ||
| # MKL_DYNAMIC : unset | ||
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
mac上的docker环境也不适用？
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
我试过， 主要是
dmidecode这个指令没有，所以不支持，如果在docker里面加进去就可以了。There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
可以新开一个issue，在docker环境下加入dmidecode指令？