Open-MSS · ReimarBauer · Aug 17, 2021 · Aug 12, 2021 · Aug 12, 2021 · Aug 12, 2021
diff --git a/...config/mss/performance_simple.json.sample → ...amples/config/mss/performance_simple.json b/...config/mss/performance_simple.json.sample → ...amples/config/mss/performance_simple.json
@@ -10,6 +10,6 @@
     "_comment2": "takeoff_weight: maximum weight for takeoff (lbs)",
     "_comment3": "empty_weight: aircraft weight without fuel (lbs)",
     "_comment4": "climb/descent: weight(lbs), altitude(ft), duration(min), distance(nm), fuel(lbs)",
-    "_comment5": "cruise: weight(lbs), altitude(ft), total air speed(nm/h), fuel flow(lbs/h)"
+    "_comment5": "cruise: weight(lbs), altitude(ft), total air speed(nm/h), fuel flow(lbs/h)",
     "_comment6": "ceiling: polynomial coeficients for relating weight (lbs) with peak flightlevel (hft). Leftmost coefficient is the intercept."
 }
diff --git a/tutorials/pictures/hexagon_control/linux/add_hexagon.png b/tutorials/pictures/hexagon_control/linux/add_hexagon.png
diff --git a/tutorials/pictures/hexagon_control/linux/center_latitude.png b/tutorials/pictures/hexagon_control/linux/center_latitude.png
diff --git a/tutorials/pictures/hexagon_control/linux/radius.png b/tutorials/pictures/hexagon_control/linux/radius.png
diff --git a/tutorials/pictures/hexagon_control/linux/remove_hexagon.png b/tutorials/pictures/hexagon_control/linux/remove_hexagon.png
diff --git a/tutorials/pictures/kml_overlay/linux/add_kml_files.png b/tutorials/pictures/kml_overlay/linux/add_kml_files.png
diff --git a/tutorials/pictures/kml_overlay/linux/changecolor.png b/tutorials/pictures/kml_overlay/linux/changecolor.png
diff --git a/tutorials/pictures/kml_overlay/linux/kmloverlay.png b/tutorials/pictures/kml_overlay/linux/kmloverlay.png
diff --git a/tutorials/pictures/kml_overlay/linux/mergeandexport.png b/tutorials/pictures/kml_overlay/linux/mergeandexport.png
diff --git a/tutorials/pictures/kml_overlay/linux/pick_screen_color.png b/tutorials/pictures/kml_overlay/linux/pick_screen_color.png
diff --git a/tutorials/pictures/kml_overlay/linux/remove_files.png b/tutorials/pictures/kml_overlay/linux/remove_files.png
diff --git a/tutorials/pictures/kml_overlay/linux/select_all_files.png b/tutorials/pictures/kml_overlay/linux/select_all_files.png
diff --git a/tutorials/pictures/kml_overlay/linux/unselect_all_files.png b/tutorials/pictures/kml_overlay/linux/unselect_all_files.png
diff --git a/tutorials/pictures/performance_settings/linux/aircraft_weight.png b/tutorials/pictures/performance_settings/linux/aircraft_weight.png
diff --git a/tutorials/pictures/performance_settings/linux/maximum_takeoff_weight.png b/tutorials/pictures/performance_settings/linux/maximum_takeoff_weight.png
diff --git a/tutorials/pictures/performance_settings/linux/select.png b/tutorials/pictures/performance_settings/linux/select.png
diff --git a/tutorials/pictures/performance_settings/linux/show_performance.png b/tutorials/pictures/performance_settings/linux/show_performance.png
diff --git a/tutorials/pictures/performance_settings/linux/take_off_time.png b/tutorials/pictures/performance_settings/linux/take_off_time.png
diff --git a/tutorials/screenrecorder.py b/tutorials/screenrecorder.py
@@ -85,8 +85,8 @@ def get_fps(self):
         screen refresh rate of your monitor (if considerable in the program) and sets the FPS.
         """
         with mss.mss() as sct:
-            bbox = {"top": self.x_start, "left": self.y_start, "width": self.width - self.x_start,
-                    "height": self.height}
+            bbox = {"top": self.y_start, "left": self.x_start, "width": self.width - self.x_start,
+                    "height": self.height - self.y_start}
             fps = 0
             last_time = time.time()
             while time.time() - last_time < 1:
@@ -117,8 +117,8 @@ def capture(self):
             mouse_pointer = None
             width, height = None, None
         with mss.mss() as sct:
-            bbox = {"top": self.x_start, "left": self.y_start, "width": self.width - self.x_start,
-                    "height": self.height}
+            bbox = {"top": self.y_start, "left": self.x_start, "width": self.width - self.x_start,
+                    "height": self.height - self.y_start}
             self.start_rec_time = time.time()
             frame_time_ms = 1000 / self.fps
             frames = 0