M119 and home Z (with bltouch) broken

[GMagician]

Did you test the latest bugfix-2.1.x code?

Yes, and the problem still exists.

Bug Description

It seems that a recent PR broke m119.
In my machine I can home X e Y but not Z (it uses bltocuh) and M119 always reports open for X, Y and Z.

I reverted #25748 and now M119 and home Z both work

Bug Timeline

Recently

Expected behavior

Z homes and M119 reports correct state

Actual behavior

M119 reports always open and Z doesn't home

Steps to Reproduce

No response

Version of Marlin Firmware

bugfix 2.1 up to #25738

Printer model

Bear 2.1

Electronics

No response

Add-ons

No response

Bed Leveling

UBL Bilinear mesh

Your Slicer

Cura

Host Software

Repetier Host

Don't forget to include

• A ZIP file containing your Configuration.h and Configuration_adv.h.

Additional information & file uploads

Configuration.zip

[thinkyhead]

In your troubleshooting, did you find that disabling ENDSTOP_INTERRUPTS_FEATURE made any difference?

[GMagician]

No, I only did a "revert". I'm sorry but I can't do checks in next 4 days.

[thisiskeithb]

In my machine I can home X e Y but not Z (it uses bltocuh) and M119 always reports open for X, Y and Z.

Do you home with a BLTouch? USE_PROBE_FOR_Z_HOMING is disabled in your config.

[ellensp]

@thisiskeithb

USE_PROBE_FOR_Z_HOMING is automatically enabled with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
(according to the comments)

/**
 * Enable this option for a probe connected to the Z-MIN pin.
 * The probe replaces the Z-MIN endstop and is used for Z homing.
 * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
 */
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN

[thisiskeithb]

USE_PROBE_FOR_Z_HOMING is automatically enabled with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN

Derp. I knew that. 🤪

[GMagician]

Fixed in latest bugfix

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.