TS011F_plug_3 are offline after updating 2.5.0-1

[Timsche2210]

What happened?

updated yesterday to 2.5.0-1 and all the TS011F_plug_3 went offline.
I dont have any clue what happend

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

2.5.0-1

Adapter firmware version

idk

Adapter

Conbee III

Setup

Home Assistant OS
Core 2025.6.3
Supervisor 2025.06.2
Operating System 15.2
Frontend 20250531.4

Debug log

no warnings / errors in the log

[manup]

Can you please share some debug logs to see what happens.
Which firmware version is on the ConBee III?

[Timsche2210]

ConBee III "revision":"0x26530900"

after restarting of Z2MQTT I reiceive those warnings:
[2025-07-03 09:52:01] �[32minfo�[39m: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Temp Filament', payload '{"battery":100,"humidity":30.82,"last_seen":"2025-07-03T07:52:01.259Z","linkquality":204,"power_outage_count":291,"pressure":967.7,"temperature":26.53,"voltage":3045}' [2025-07-03 09:52:01] �[32minfo�[39m: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Temp Filament', payload '{"battery":100,"humidity":30.82,"last_seen":"2025-07-03T07:52:01.271Z","linkquality":204,"power_outage_count":291,"pressure":968,"temperature":26.53,"voltage":3045}' [2025-07-03 09:52:03] �[33mwarning�[39m: z2m: Failed to ping 'P1S LED' (attempt 1/1, ZCL command 0x70b3d52b601036c2/1 genBasic.read(["zclVersion"], {"timeout":10000,"disableResponse":false,"disableRecovery":true,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (No ZCL response received for (2) Error: waiting for response TIMEOUT)) [2025-07-03 09:52:15] �[33mwarning�[39m: z2m: Failed to ping 'Schreibtisch Maike' (attempt 1/1, ZCL command 0x70b3d52b6013287b/1 genBasic.read(["zclVersion"], {"timeout":10000,"disableResponse":false,"disableRecovery":true,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (No ZCL response received for (3) Error: waiting for response TIMEOUT)) [2025-07-03 09:52:19] �[32minfo�[39m: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/P1S Plug', payload '{"child_lock":"UNLOCK","current":0,"energy":117.66,"indicator_mode":"off","last_seen":"2025-07-03T07:52:19.302Z","linkquality":209,"power":0,"power_outage_memory":"off","state":"OFF","update":{"installed_version":268514823,"latest_version":268514823,"state":"idle"},"voltage":235}' [2025-07-03 09:52:19] �[32minfo�[39m: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/P1S Plug', payload '{"child_lock":"UNLOCK","current":0,"energy":117.66,"indicator_mode":"off","last_seen":"2025-07-03T07:52:19.894Z","linkquality":210,"power":0,"power_outage_memory":"off","state":"OFF","update":{"installed_version":268514823,"latest_version":268514823,"state":"idle"},"voltage":235}'

Update if I click on "new configure"

error 2025-07-03 11:24:38z2m: Failed to configure 'P1S LED', attempt 1 (Error: ZCL command 0x70b3d52b601036c2/1 genBasic.read(["manufacturerName","zclVersion","appVersion","modelId","powerSource",65534], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (No ZCL response received for (39) Error: waiting for response TIMEOUT) at DeconzAdapter.sendZclFrameToEndpoint (/app/node_modules/.pnpm/zigbee-herdsman@4.3.1/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:488:23) at Request.send (/app/node_modules/.pnpm/zigbee-herdsman@4.3.1/node_modules/zigbee-herdsman/src/controller/helpers/request.ts:86:20) at Endpoint.sendRequest (/app/node_modules/.pnpm/zigbee-herdsman@4.3.1/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:338:20) at Endpoint.zclCommand (/app/node_modules/.pnpm/zigbee-herdsman@4.3.1/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:982:28) at Endpoint.read (/app/node_modules/.pnpm/zigbee-herdsman@4.3.1/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:459:29) at Object.configureMagicPacket (/app/node_modules/.pnpm/zigbee-herdsman-converters@23.69.0/node_modules/zigbee-herdsman-converters/src/lib/tuya.ts:491:9) at configure (/app/node_modules/.pnpm/zigbee-herdsman-converters@23.69.0/node_modules/zigbee-herdsman-converters/src/devices/tuya.ts:6758:13) at Object.configure (/app/node_modules/.pnpm/zigbee-herdsman-converters@23.69.0/node_modules/zigbee-herdsman-converters/src/index.ts:363:21) at Configure.configure (/app/lib/extension/configure.ts:123:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:46:25))

[Timsche2210]

push, still no improvement (but also still no update of z2m available)

[Koenkk]

Can you try with the latest dev branch and conbee firmware?

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.

[Timsche2210]

Can you try with the latest dev branch and conbee firmware?

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.

I updated the conbee III with web updater

this is what I see in HA settings -> hardware -> ttyUSB0:
DEVLINKS: >- /dev/serial/by-id/usb-dresden_elektronik_ConBee_III_DE03188851-if00-port0 /dev/serial/by-path/pci-0000:00:18.0-usb-0:1:1.0-port0 /dev/serial/by-path/pci-0000:00:18.0-usbv1-0:1:1.0-port0 DEVNAME: /dev/ttyUSB0 DEVPATH: /devices/pci0000:00/0000:00:18.0/usb3/3-1/3-1:1.0/ttyUSB0/tty/ttyUSB0 ID_BUS: usb ID_MODEL: ConBee_III ID_MODEL_ENC: ConBee\x20III ID_MODEL_ID: '6015' ID_PATH: pci-0000:00:18.0-usb-0:1:1.0 ID_PATH_TAG: pci-0000_00_18_0-usb-0_1_1_0 ID_PATH_WITH_USB_REVISION: pci-0000:00:18.0-usbv1-0:1:1.0 ID_REVISION: '1000' ID_SERIAL: dresden_elektronik_ConBee_III_DE03188851 ID_SERIAL_SHORT: DE03188851 ID_TYPE: generic ID_USB_DRIVER: ftdi_sio ID_USB_INTERFACES: ':ffffff:' ID_USB_INTERFACE_NUM: '00' ID_USB_MODEL: ConBee_III ID_USB_MODEL_ENC: ConBee\x20III ID_USB_MODEL_ID: '6015' ID_USB_REVISION: '1000' ID_USB_SERIAL: dresden_elektronik_ConBee_III_DE03188851 ID_USB_SERIAL_SHORT: DE03188851 ID_USB_TYPE: generic ID_USB_VENDOR: dresden_elektronik ID_USB_VENDOR_ENC: dresden\x20elektronik ID_USB_VENDOR_ID: '0403' ID_VENDOR: dresden_elektronik ID_VENDOR_ENC: dresden\x20elektronik ID_VENDOR_ID: '0403' MAJOR: '188' MINOR: '0' SUBSYSTEM: tty TAGS: ':systemd:' USEC_INITIALIZED: '4711219'
but I am not able to see which software version I have installed?

after deactivating z2m and installing z2m edge -> its working!
Thanks :)
so with the next stable update I can use the normal z2m again?

[Koenkk]

@Timsche2210 yes, changes will be included in the next release, until then you can keep using the dev branch