[New device support]: IKEA INSPELNING smart plug with power monitoring

[QempZor]

Link

US Version: https://www.ikea.com/us/en/p/inspelning-plug-smart-energy-monitor-90569846/
Dutch version: No ikea link yet, but buyable in the stores.. :)

Database entry

{"id":53,"type":"Router","ieeeAddr":"0xecf64cfffef2b718","nwkAddr":27855,"manufId":4476,"manufName":"IKEA of Sweden","powerSource":"Mains (single phase)","modelId":"INSPELNING Smart plug","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":266,"inClusterList":[0,3,4,5,6,8,1794,2820,4096,64636,64645],"outClusterList":[25],"clusters":{"genBasic":{"attributes":{"modelId":"INSPELNING Smart plug","manufacturerName":"IKEA of Sweden","powerSource":1,"zclVersion":8,"appVersion":2,"stackVersion":114,"hwVersion":1,"dateCode":"20240215","swBuildId":"2.4.34"}},"haElectricalMeasurement":{"attributes":{"acPowerDivisor":10,"acPowerMultiplier":1,"acCurrentDivisor":1000,"acCurrentMultiplier":1,"acVoltageDivisor":10,"acVoltageMultiplier":1,"activePower":0,"rmsCurrent":3,"rmsVoltage":236}},"seMetering":{"attributes":{"divisor":1000,"multiplier":1,"currentSummDelivered":[0,77]}},"genLevelCtrl":{"attributes":{"onLevel":255,"currentLevel":254}},"genOnOff":{"attributes":{"onOff":1}}},"binds":[{"cluster":2820,"type":"endpoint","deviceIeeeAddress":"0xb43522fffe12b3b4","endpointID":1},{"cluster":1794,"type":"endpoint","deviceIeeeAddress":"0xb43522fffe12b3b4","endpointID":1}],"configuredReportings":[{"cluster":2820,"attrId":1291,"minRepIntval":10,"maxRepIntval":65000,"repChange":50},{"cluster":2820,"attrId":1288,"minRepIntval":10,"maxRepIntval":65000,"repChange":50},{"cluster":2820,"attrId":1285,"minRepIntval":10,"maxRepIntval":65000,"repChange":50},{"cluster":1794,"attrId":0,"minRepIntval":10,"maxRepIntval":65000,"repChange":[0,100]}],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[33],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":2,"stackVersion":114,"hwVersion":1,"dateCode":"20240215","swBuildId":"2.4.34","zclVersion":8,"interviewCompleted":true,"meta":{"configured":332242049},"lastSeen":1726245436588}

Zigbee2MQTT version

1.40.1

Comments

Just picked this plugs up at the Ikea in Amsterdam. They're quite new, no infopage on the Ikea site (NL)
I tried to follow the "How to add support" page, but.. well,.. to complicated for this noob :)

However I want to help so here is al the information I know.

Out of the box, in Z2M, a lot works already quite well. See the results below.

Extra;
Some Tweakers forum information (Dutch): https://gathering.tweakers.net/forum/list_message/80105532#80105532

External definition

const {light, electricityMeter} = require('zigbee-herdsman-converters/lib/modernExtend');

const definition = {
    zigbeeModel: ['INSPELNING Smart plug'],
    model: 'INSPELNING Smart plug',
    vendor: 'IKEA of Sweden',
    description: 'Automatically generated definition',
    extend: [light(), electricityMeter()],
    meta: {},
};

module.exports = definition;

What does/doesn't work with the external definition?

Out of the box in:

• ON OFF switch works as expected.
• There is an "Effect" thing in HA/Z2M: Dont think it needs to be there for plug
• There is an "Brightness slider" Dont think it needs to be there for plug
• Energy Sensor is a sum of total consumed energy. Don't know if correct. See next point.
• Power monitoring works kinda. When I charge my iPad it reads around 20W wich seems to be good. However if i plug in my toaster (wich is around 2000w) it reports around 209w) So there seems like a decimal error thing?
• Same problem for voltage. It reports 23,3-23,6v (when pluged in to a 230v outlet ofcourse)
• ̶P̶r̶o̶b̶a̶b̶l̶y̶ ̶t̶h̶e̶ ̶s̶a̶m̶e̶ ̶t̶h̶i̶n̶g̶ ̶f̶o̶r̶ ̶t̶h̶e̶ ̶a̶m̶p̶e̶r̶a̶g̶e̶.̶.̶ ̶D̶i̶d̶n̶t̶ ̶t̶e̶s̶t̶ ̶t̶h̶a̶t̶.̶ UPDATE: After testing the amperage seems to be correct.

Configuration page (in HA) shows a Power-on behavior wich works as expected

[Rembock]

I made this definition:

External definition

const {electricityMeter, onOff, identify} = require('zigbee-herdsman-converters/lib/modernExtend');
const {addCustomClusterManuSpecificIkeaUnknown, ikeaOta} = require('zigbee-herdsman-converters/lib/ikea')

const definition = {
   zigbeeModel: ['INSPELNING Smart plug'],
   model: 'E2206',
   vendor: 'IKEA',
   description: 'INSPELNING Smart plug',
   extend: [addCustomClusterManuSpecificIkeaUnknown(), onOff(), identify(), ikeaOta(), electricityMeter()],
   meta: {},
};

module.exports = definition;

What does this external definition fix?

• Removes "Effect"
• Removes "Brightness slider"

Also:

• Energy Sensor looks indeed like a sum of total consumed energy, I have another energymeter that does the same
• Power monitoring works like it should, the voltage differs depending of the connected device onto your plug & should never use the full 230v.
• Same applies to voltage and amperage

[QempZor]

clarifying the voltage and wattage.
1500w toaster connected shows this on a 240v outlet:

[Rembock]

You're right, I think I've extended the external definition correctly now. Can you try if this external definition works for you as well?

External definition

const {} = require('zigbee-herdsman-converters/lib/modernExtend');
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;

const {electricityMeter, onOff, identify} = require('zigbee-herdsman-converters/lib/modernExtend');
const {addCustomClusterManuSpecificIkeaUnknown, ikeaOta} = require('zigbee-herdsman-converters/lib/ikea');

const definition = {
   zigbeeModel: ['INSPELNING Smart plug'],
   model: 'E2206',
   vendor: 'IKEA',
   description: 'INSPELNING Smart plug',
   extend: [addCustomClusterManuSpecificIkeaUnknown(), onOff(), identify(), ikeaOta()],      
   fromZigbee: [fz.electrical_measurement, fz.metering],
   toZigbee: [],
   configure: async (device, coordinatorEndpoint, logger) => {
       const endpoint = device.getEndpoint(1);
       await reporting.bind(endpoint, coordinatorEndpoint, ['haElectricalMeasurement', 'seMetering']);
       await reporting.activePower(endpoint);
       await reporting.rmsVoltage(endpoint);
       await reporting.rmsCurrent(endpoint); 
       await reporting.currentSummDelivered(endpoint);               
       endpoint.saveClusterAttributeKeyValue('haElectricalMeasurement', {
           acPowerMultiplier: 1,
           acPowerDivisor: 10,
           acVoltageMultiplier: 1,
           acVoltageDivisor: 1,
           acCurrentMultiplier: 1,
           acCurrentDivisor: 1000,            
       });
       endpoint.saveClusterAttributeKeyValue('seMetering', {divisor: 100, multiplier: 1});        
       device.save();
   },
   exposes: [e.power(), e.voltage(), e.current(), e.energy()],
};

module.exports = definition;

This is my result:

I am not sure if the number of kWh is correct yet

Also don't forget to restart zigbee2mqtt and re-pair your device, otherwise it won't work.

[QempZor]

Voltage is correct now. I think the total sum of Energy already was correct
Power is still wrong when wattage reach >1000w

EDIT: Total sum of energy looks like it 10 times to high

[ronaldevers]

@Rembock the "effect" actually worked on the light on the plug. I could for example make the light "breathe". The brightness did not appear to do anything. So I don't think the "effect" should be removed.

[itkama]

These are also available in Germany now. Just bought 2. I will take a look if your external controller works for me tomorrow @Rembock. Any clue on how to get these into pairing mode?

[basvdploeg]

@itkama You can put them in pairing mode by pressing and holding the small button next to the power button. You probably need a pointy object to do so.

[itkama]

Okay, so I couldn't wait until tomorrow to pair it (thanks @basvdploeg):

Seems to be kind of working out of the box already? Voltage looks about right. On/Off working. Not sure about the power measurement, as this is the first time I'm measuring my vacuum bot.

Tried the other one with a pretty efficient GAN-USB-Charger to charge a powerbank that shows how much is going in. While the plug reported 30 to 31W, while the powerbank was reporting around 25W of input power. So for low power it may be kind of accurate.

What does the external converter really change now though? The power number atleast on low wattages seems to be looking correct? 🧐

[Rembock]

Made a new definition, this one fixes the issue's with Energy and Power @QempZor
@ronaldevers i will try to take a look if there's a dimmer functionality hidden somewere,

External definition

const {} = require('zigbee-herdsman-converters/lib/modernExtend');
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;

const {electricityMeter, onOff, identify} = require('zigbee-herdsman-converters/lib/modernExtend');
const {addCustomClusterManuSpecificIkeaUnknown, ikeaOta} = require('zigbee-herdsman-converters/lib/ikea');

const definition = {
   zigbeeModel: ['INSPELNING Smart plug'],
   model: 'E2206',
   vendor: 'IKEA',
   description: 'INSPELNING Smart plug',
   extend: [addCustomClusterManuSpecificIkeaUnknown(), onOff(), identify(), ikeaOta()],      
   fromZigbee: [fz.electrical_measurement, fz.metering],
   toZigbee: [],
   configure: async (device, coordinatorEndpoint, logger) => {
       const endpoint = device.getEndpoint(1);
       await reporting.bind(endpoint, coordinatorEndpoint, ['haElectricalMeasurement', 'seMetering']);
       await reporting.activePower(endpoint);
       await reporting.rmsVoltage(endpoint);
       await reporting.rmsCurrent(endpoint); 
       await reporting.currentSummDelivered(endpoint);               
       endpoint.saveClusterAttributeKeyValue('haElectricalMeasurement', {
           acPowerMultiplier: 1,
           acPowerDivisor: 1,
           acVoltageMultiplier: 1,
           acVoltageDivisor: 1,
           acCurrentMultiplier: 1,
           acCurrentDivisor: 1000,            
       });
       endpoint.saveClusterAttributeKeyValue('seMetering', {divisor: 1000, multiplier: 1});        
       device.save();
   },
   exposes: [
       e.power(), 
       e.voltage(), 
       e.current(), 
       e.energy()
   ],    
};

module.exports = definition;

[Rembock]

@ronaldevers I get Data confirm errors in my log when I add light to the extended definition, so I decided not to configure the effect

[LeoSum8]

This looks very promising! I think I'll need to go out to eat some hotdogs for lunch pretty soon :)
Can anyone share how often the values are updated? Thanks!

[QempZor]

Okay, so I couldn't wait until tomorrow to pair it (thanks @basvdploeg): Seems to be kind of working out of the box already? Voltage looks about right. On/Off working. Not sure about the power measurement, as this is the first time I'm measuring my vacuum bot.

Tried the other one with a pretty efficient GAN-USB-Charger to charge a powerbank that shows how much is going in. While the plug reported 30 to 31W, while the powerbank was reporting around 25W of input power. So for low power it may be kind of accurate.

What does the external converter really change now though? The power number atleast on low wattages seems to be looking correct? 🧐

Power readings below 1000w are fine (out of the box), But above 1000W everything is shown as 100,0w (or f.e. 132,4w)

With the ext. def. from Rembock, everything above 1000W seems to be good; but below 1000w is then show 10x too much (7,2w LED bulb reads 72w power... )

Also; I saw someone on Tweakers (dutch tech forum) who bought 2 of these plugs and didn't show any data. He changed them at another Ikea store and then one of them is showing the correct voltage, and one is shown 10times to high voltage, with the same settings/ext.def.) So there might also be a (small) problem within the units itself. (<- Thats just speculation)

[Rembock]

I am almost certain that this must be a firmware issue, I hope Ikea will come up with an update soon.

Also; I saw someone on Tweakers (dutch tech forum) who bought 2 of these plugs and didn't show any data. He changed them at another Ikea store and then one of them is showing the correct voltage, and one is shown 10times to high voltage, with the same settings/ext.def.) So there might also be a (small) problem within the units itself. (<- Thats just speculation)

Yup, that's @basvdploeg :)