Update 5.4.x+fslc to v5.4.105#286
Merged
otavio merged 26 commits intoFreescale:5.4.x+fslcfrom Mar 12, 2021
Merged
Conversation
commit e131a56 upstream. gro_cells lib is used by different encapsulating netdevices, such as geneve, macsec, vxlan etc. to speed up decapsulated traffic processing. CPU tag is a sort of "encapsulation", and we can use the same mechs to greatly improve overall DSA performance. skbs are passed to the GRO layer after removing CPU tags, so we don't need any new packet offload types as it was firstly proposed by me in the first GRO-over-DSA variant [1]. The size of struct gro_cells is sizeof(void *), so hot struct dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields remain in one 32-byte cacheline. The other positive side effect is that drivers for network devices that can be shipped as CPU ports of DSA-driven switches can now use napi_gro_frags() to pass skbs to kernel. Packets built that way are completely non-linear and are likely being dropped without GRO. This was tested on to-be-mainlined-soon Ethernet driver that uses napi_gro_frags(), and the overall performance was on par with the variant from [1], sometimes even better due to minimal overhead. net.core.gro_normal_batch tuning may help to push it to the limit on particular setups and platforms. iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup on 1.2 GHz MIPS board: 5.7-rc2 baseline: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender [ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver Iface RX packets TX packets eth0 7097731 7097702 port0 426050 6671829 port1 6671681 425862 port1.218 6671677 425851 With this patch: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender [ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver Iface RX packets TX packets eth0 9474792 9474777 port0 455200 353288 port1 9019592 455035 port1.218 353144 455024 v2: - Add some performance examples in the commit message; - No functional changes. [1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/ Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4c8dd9 upstream. According to the definition of dm_iterate_devices_fn: * This function must iterate through each section of device used by the * target until it encounters a non-zero return code, which it then returns. * Returns zero if no callout returned non-zero. For some target type (e.g. dm-stripe), one call of iterate_devices() may iterate multiple underlying devices internally, in which case a non-zero return code returned by iterate_devices_callout_fn will stop the iteration in advance. No iterate_devices_callout_fn should return non-zero unless device iteration should stop. Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and elevate it for reuse to stop iterating (and return non-zero) on the first device that causes iterate_devices_callout_fn to return non-zero. Use dm_table_any_dev_attr() to properly iterate through devices. Rename device_is_nonrot() to device_is_rotational() and invert logic accordingly to fix improper disposition. Fixes: c3c4555 ("dm table: clear add_random unless all devices have it set") Fixes: 4693c96 ("dm table: propagate non rotational flag") Cc: stable@vger.kernel.org Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b0fab5 upstream. Fix dm_table_supports_dax() and invert logic of both iterate_devices_callout_fn so that all devices' DAX capabilities are properly checked. Fixes: 545ed20 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24f6b60 upstream. Fix dm_table_supports_zoned_model() and invert logic of both iterate_devices_callout_fn so that all devices' zoned capabilities are properly checked. Add one more parameter to dm_table_any_dev_attr(), which is actually used as the @DaTa parameter of iterate_devices_callout_fn, so that dm_table_matches_zone_sectors() can be replaced by dm_table_any_dev_attr(). Fixes: dd88d31 ("dm table: add zoned block devices validation") Cc: stable@vger.kernel.org Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> [jeffle: also convert partial completion check] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…eter handling commit c27f3d0 upstream. ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61 The handling of the generic_serial_bus (I2C) and GPIO op_regions in acpi_ev_address_space_dispatch() passes a number of extra parameters to the address-space handler through the address-space Context pointer (instead of using more function parameters). The Context is shared between threads, so if multiple threads try to call the handler for the same address-space at the same time, then a second thread could change the parameters of a first thread while the handler is running for the first thread. An example of this race hitting is the Lenovo Yoga Tablet2 1015L, where there are both attrib_bytes accesses and attrib_byte accesses to the same address-space. The attrib_bytes access stores the number of bytes to transfer in Context->access_length. Where as for the attrib_byte access the number of bytes to transfer is always 1 and field_obj->Field.access_length is unused (so 0). Both types of accesses racing from different threads leads to the following problem: 1. Thread a. starts an attrib_bytes access, stores a non 0 value from field_obj->Field.access_length in Context->access_length 2. Thread b. starts an attrib_byte access, stores 0 in Context->access_length 3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE and calls acpi_gsb_i2c_read_bytes(..., Context->access_length) 4. At this point Context->access_length is 0 (set by thread b.) rather then the field_obj->Field.access_length value from thread a. This 0 length reads leads to the following errors being logged: i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read) i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95 Note this is just an example of the problems which this race can cause. There are likely many more (sporadic) problems caused by this race. This commit adds a new context_mutex to struct acpi_object_addr_handler and makes acpi_ev_address_space_dispatch() take that mutex when using the shared Context to pass extra parameters to an address-space handler, fixing this race. Note the new mutex must be taken *after* exiting the interpreter, therefor the existing acpi_ex_exit_interpreter() call is moved to above the code which stores the extra parameters in the Context. Link: acpica/acpica@c9e01169 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 140456f upstream. increase_address_space() calls get_zeroed_page(gfp) under spin_lock with disabled interrupts. gfp flags passed to increase_address_space() may allow sleeping, so it comes to this: BUG: sleeping function called from invalid context at mm/page_alloc.c:4342 in_atomic(): 1, irqs_disabled(): 1, pid: 21555, name: epdcbbf1qnhbsd8 Call Trace: dump_stack+0x66/0x8b ___might_sleep+0xec/0x110 __alloc_pages_nodemask+0x104/0x300 get_zeroed_page+0x15/0x40 iommu_map_page+0xdd/0x3e0 amd_iommu_map+0x50/0x70 iommu_map+0x106/0x220 vfio_iommu_type1_ioctl+0x76e/0x950 [vfio_iommu_type1] do_vfs_ioctl+0xa3/0x6f0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4e/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by moving get_zeroed_page() out of spin_lock/unlock section. Fixes: 754265b ("iommu/amd: Fix race in increase_address_space()") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Acked-by: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210217143004.19165-1-arbn@yandex-team.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4add4d9 ] If a reset is performed, but even the reset fails for some reasons (e.g., on Surface devices, the fw reset requires another quirks), cancel_work_sync() hangs in mwifiex_cleanup_pcie(). # firmware went into a bad state [...] [ 1608.281690] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 1608.282724] mwifiex_pcie 0000:03:00.0: rx_pending=0, tx_pending=1, cmd_pending=0 [ 1608.292400] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 1608.292405] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed # reset performed after firmware went into a bad state [ 1609.394320] mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld [ 1609.394335] mwifiex_pcie 0000:03:00.0: WLAN FW is active # but even the reset failed [ 1619.499049] mwifiex_pcie 0000:03:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xe000 [ 1619.499094] mwifiex_pcie 0000:03:00.0: num_data_h2c_failure = 0 [ 1619.499103] mwifiex_pcie 0000:03:00.0: num_cmd_h2c_failure = 0 [ 1619.499110] mwifiex_pcie 0000:03:00.0: is_cmd_timedout = 1 [ 1619.499117] mwifiex_pcie 0000:03:00.0: num_tx_timeout = 0 [ 1619.499124] mwifiex_pcie 0000:03:00.0: last_cmd_index = 0 [ 1619.499133] mwifiex_pcie 0000:03:00.0: last_cmd_id: fa 00 07 01 07 01 07 01 07 01 [ 1619.499140] mwifiex_pcie 0000:03:00.0: last_cmd_act: 00 e0 00 00 00 00 00 00 00 00 [ 1619.499147] mwifiex_pcie 0000:03:00.0: last_cmd_resp_index = 3 [ 1619.499155] mwifiex_pcie 0000:03:00.0: last_cmd_resp_id: 07 81 07 81 07 81 07 81 07 81 [ 1619.499162] mwifiex_pcie 0000:03:00.0: last_event_index = 2 [ 1619.499169] mwifiex_pcie 0000:03:00.0: last_event: 58 00 58 00 58 00 58 00 58 00 [ 1619.499177] mwifiex_pcie 0000:03:00.0: data_sent=0 cmd_sent=1 [ 1619.499185] mwifiex_pcie 0000:03:00.0: ps_mode=0 ps_state=0 [ 1619.499215] mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device # mwifiex_pcie_work hang happening [ 1823.233923] INFO: task kworker/3:1:44 blocked for more than 122 seconds. [ 1823.233932] Tainted: G WC OE 5.10.0-rc1-1-mainline Freescale#1 [ 1823.233935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1823.233940] task:kworker/3:1 state:D stack: 0 pid: 44 ppid: 2 flags:0x00004000 [ 1823.233960] Workqueue: events mwifiex_pcie_work [mwifiex_pcie] [ 1823.233965] Call Trace: [ 1823.233981] __schedule+0x292/0x820 [ 1823.233990] schedule+0x45/0xe0 [ 1823.233995] schedule_timeout+0x11c/0x160 [ 1823.234003] wait_for_completion+0x9e/0x100 [ 1823.234012] __flush_work.isra.0+0x156/0x210 [ 1823.234018] ? flush_workqueue_prep_pwqs+0x130/0x130 [ 1823.234026] __cancel_work_timer+0x11e/0x1a0 [ 1823.234035] mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie] [ 1823.234049] mwifiex_free_adapter+0x24/0xe0 [mwifiex] [ 1823.234060] _mwifiex_fw_dpc+0x294/0x560 [mwifiex] [ 1823.234074] mwifiex_reinit_sw+0x15d/0x300 [mwifiex] [ 1823.234080] mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie] [ 1823.234087] pci_try_reset_function+0x5c/0x90 [ 1823.234094] process_one_work+0x1d6/0x3a0 [ 1823.234100] worker_thread+0x4d/0x3d0 [ 1823.234107] ? rescuer_thread+0x410/0x410 [ 1823.234112] kthread+0x142/0x160 [ 1823.234117] ? __kthread_bind_mask+0x60/0x60 [ 1823.234124] ret_from_fork+0x22/0x30 [...] This is a deadlock caused by calling cancel_work_sync() in mwifiex_cleanup_pcie(): - Device resets are done via mwifiex_pcie_card_reset() - which schedules card->work to call mwifiex_pcie_card_reset_work() - which calls pci_try_reset_function(). - This leads to mwifiex_pcie_reset_done() be called on the same workqueue, which in turn calls - mwifiex_reinit_sw() and that calls - _mwifiex_fw_dpc(). The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter() in case firmware initialization fails. That ends up calling mwifiex_cleanup_pcie(). Note that all those calls are still running on the workqueue. So when mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting on itself to complete, causing a deadlock. This commit fixes the deadlock by skipping cancel_work_sync() on a reset failure path. After this commit, when reset fails, the following output is expected to be shown: kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device kernel: mwifiex: Failed to bring up adapter: -5 kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5 To reproduce this issue, for example, try putting the root port of wifi into D3 (replace "00:1d.3" with your setup). # put into D3 (root port) sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b Cc: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142346.18355-1-kitakar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c936d8 ] Cleanup the ACER_CAP_FOO defines: -Switch to using BIT() macro. -The ACER_CAP_RFBTN flag is set, but it is never checked anywhere, drop it. -Drop the unused ACER_CAP_ANY define. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201019185628.264473-2-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9feb076 ] Cleanup accelerometer device handling: -Drop acer_wmi_accel_destroy instead directly call input_unregister_device. -The information tracked by the CAP_ACCEL flag mirrors acer_wmi_accel_dev being NULL. Drop the CAP flag, this is a preparation change for allowing users to override the capability flags. Dropping the flag stops users from causing a NULL pointer dereference by forcing the capability. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201019185628.264473-3-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39aa009 ] Add a new force_caps module parameter to allow overriding the drivers builtin capability detection mechanism. This can be used to for example: -Disable rfkill functionality on devices where there is an AA OEM DMI record advertising non functional rfkill switches -Force loading of the driver on devices with a missing AA OEM DMI record Note that force_caps is -1 when unset, this allows forcing the capability field to 0, which results in acer-wmi only providing WMI hotkey handling while disabling all other (led, rfkill, backlight) functionality. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201019185628.264473-4-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82cb8a5 ] Not all devices supporting WMID_GUID3 support the wmid3_set_function_mode() call, leading to errors like these: [ 60.138358] acer_wmi: Enabling RF Button failed: 0x1 - 0xff [ 60.140036] acer_wmi: Enabling Launch Manager failed: 0x1 - 0xff Add an ACER_CAP_SET_FUNCTION_MODE capability flag, so that these calls can be disabled through the new force_caps mechanism. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201019185628.264473-5-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c54cb6 ] Add support for SW_TABLET_MODE on the Acer Switch 10 (SW5-012) and the acer Switch 10 (S1003) models. There is no way to detect if this is supported, so this uses DMI based quirks setting force_caps to ACER_CAP_KBD_DOCK (these devices have no other acer-wmi based functionality). The new SW_TABLET_MODE functionality can be tested on devices which are not in the DMI table by passing acer_wmi.force_caps=0x40 on the kernel commandline. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201019185628.264473-6-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
…itch 10E SW3-016 [ Upstream commit bf75340 ] Add the Acer Aspire Switch 10E SW3-016 to the list of models which use the Acer Switch WMI interface for reporting SW_TABLET_MODE. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201123151625.5530-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
…dapter [ Upstream commit 1008230 ] Mayflash/Dragonrise seems to have yet another device ID for one of their Gamecube controller adapters. Previous to this commit, the adapter registered only one /dev/input/js* device, and all controller inputs (from any controller) were mapped to this device. This patch defines the 1846 USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, which fixes that (with the patch, four /dev/input/js* devices are created, one for each of the four controller ports). Signed-off-by: Ethan Warth <redyoshi49q@gmail.com> Tested-by: Wladimir J. van der Laan <laanwj@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbf0b3a ] On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit RiSC engine sometimes stalls, requiring a reset. As result, MythTV and w-scan won't scan channels on the AMD Kaveri APU with the Hauppauge QuadHD TV tuner card. For the solution I added the Input/Output Memory Management Unit's PCI Identity of 0x1423 to the broken_dev_id[] array, which is used by a quirks logic meant to fix similar problems with other AMD chipsets. Signed-off-by: Daniel Lee Kruse <daniel.lee.kruse@protonmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2541718 ] The GIGABYTE GB-BXBT-2807 is a mini-PC which uses off the shelf components, like an Intel GPU which is meant for mobile systems. As such, it, by default, has a backlight controller exposed. Unfortunately, the backlight controller only confuses userspace, which sees the existence of a backlight device node and has the unrealistic belief that there is actually a backlight there! Add a DMI quirk to force the backlight off on this system. Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net> Reviewed-by: Chris Chiu <chiu@endlessos.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bea225 ] Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing, thus the heaset functions are not working. Add quirk for this model to select the correct input map, jack-detect options and channel map to enable jack sensing and headset microphone. This device uses IN1 for its internal MIC and JD2 for jack-detect. Signed-off-by: Chris Chiu <chiu@endlessos.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0599837 ] Add function 1 DMA alias quirk for Marvell 88SS9215 PCIe SSD Controller. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 Link: https://lore.kernel.org/r/20201110220516.697934-1-helgaas@kernel.org Reported-by: John Smith <LK7S2ED64JHGLKj75shg9klejHWG49h5hk@protonmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6f1f8e ] A dummy zero bit is sent preceding the data during a read transfer by the Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift of data during a read. In order to ignore this bit a quirk can be added to send an extra zero bit after the read address. Add a quirk to ignore the zero bit sent before data by adding a zero bit after the read address. [1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f03c30 ] The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets programmed to some different values on a per-model basis. At least, this is what we intend to do here; Unfortunately, though, this register is being overwritten with a static magic number, right after applying the GPU-specific configuration (including the GPU-specific quirks) and that is effectively nullifying the efforts. Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL register in order to retain the wanted configuration for the target GPU. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7dfda ] The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so set the quirk. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20201210165510.76b917e5@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…Voyo Winpad A15 [ Upstream commit fc6a31b ] The ITE8568 EC on the Voyo Winpad A15 presents itself as an I2C-HID attached keyboard and mouse (which seems to never send any events). This needs the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk, otherwise we get the following errors: [ 3688.770850] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3694.915865] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3701.059717] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3707.205944] i2c_hid i2c-ITE8568:00: failed to reset device. [ 3708.227940] i2c_hid i2c-ITE8568:00: can't add hid device: -61 [ 3708.236518] i2c_hid: probe of i2c-ITE8568:00 failed with error -61 Which leads to a significant boot delay. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e112d3 ] The kernel fails to fully detect these SSDs, only the character devices are present: [ 10.785605] nvme nvme0: pci function 0000:04:00.0 [ 10.876787] nvme nvme1: pci function 0000:81:00.0 [ 13.198614] nvme nvme0: missing or invalid SUBNQN field. [ 13.198658] nvme nvme1: missing or invalid SUBNQN field. [ 13.206896] nvme nvme0: Shutdown timeout set to 20 seconds [ 13.215035] nvme nvme1: Shutdown timeout set to 20 seconds [ 13.225407] nvme nvme0: 16/0/0 default/read/poll queues [ 13.233602] nvme nvme1: 16/0/0 default/read/poll queues [ 13.239627] nvme nvme0: Identify Descriptors failed (8194) [ 13.246315] nvme nvme1: Identify Descriptors failed (8194) Adding the NVME_QUIRK_NO_NS_DESC_LIST fixes this problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205679 Signed-off-by: Julian Einwag <jeinwag-nvme@marcapo.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e6a682 ] Add the NVME_QUIRK_NO_NS_DESC_LIST and NVME_QUIRK_IGNORE_DEV_SUBNQN quirks for this buggy device. Reported and tested in https://bugs.mageia.org/show_bug.cgi?id=28417 Signed-off-by: Pascal Terjan <pterjan@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Ross Schmidt <ross.schm.dev@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Hulk Robot <hulkrobot@huawei.com> Link: https://lore.kernel.org/r/20210310132320.550932445@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.4.105 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
15 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
defconfig) and arm32 (imx_v6_v7_defconfig).-- andrey