java.lang.OutOfMemoryError during deserialization

[psindrome]

The stacktrace has been attached at the bottom. Known issue ?

Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
at com.fasterxml.jackson.core.util.TextBuffer._charArray(TextBuffer.java:705)
at com.fasterxml.jackson.core.util.TextBuffer.expand(TextBuffer.java:664)
at com.fasterxml.jackson.core.util.TextBuffer.append(TextBuffer.java:468)
at com.fasterxml.jackson.core.io.SegmentedStringWriter.write(SegmentedStringWriter.java:67)
at com.fasterxml.jackson.core.json.WriterBasedJsonGenerator._flushBuffer(WriterBasedJsonGene
rator.java:1799)
at com.fasterxml.jackson.core.json.WriterBasedJsonGenerator._writeString(WriterBasedJsonGene
rator.java:975)
at com.fasterxml.jackson.core.json.WriterBasedJsonGenerator.writeString(WriterBasedJsonGener
ator.java:436)
at com.fasterxml.jackson.databind.ser.std.StringSerializer.serialize(StringSerializer.java:3
6)
at com.fasterxml.jackson.databind.ser.std.StringSerializer.serialize(StringSerializer.java:1
)
at com.fasterxml.jackson.databind.ser.BeanPropertyWriter.serializeAsField(BeanPropertyWriter
.java:464)
at com.fasterxml.jackson.databind.ser.std.BeanSerializerBase.serializeFields(BeanSerializerB
ase.java:504)
at com.fasterxml.jackson.databind.ser.BeanSerializer.serialize(BeanSerializer.java:117)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:94)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:1)
at com.fasterxml.jackson.databind.ser.std.AsArraySerializerBase.serialize(AsArraySerializerB
ase.java:150)
at com.fasterxml.jackson.databind.ser.BeanPropertyWriter.serializeAsField(BeanPropertyWriter
.java:464)
at com.fasterxml.jackson.databind.ser.std.BeanSerializerBase.serializeFields(BeanSerializerB
ase.java:504)
at com.fasterxml.jackson.databind.ser.BeanSerializer.serialize(BeanSerializer.java:117)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:94)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:1)
at com.fasterxml.jackson.databind.ser.std.AsArraySerializerBase.serialize(AsArraySerializerB
ase.java:150)
at com.fasterxml.jackson.databind.ser.BeanPropertyWriter.serializeAsField(BeanPropertyWriter
.java:464)
at com.fasterxml.jackson.databind.ser.std.BeanSerializerBase.serializeFields(BeanSerializerB
ase.java:504)
at com.fasterxml.jackson.databind.ser.BeanSerializer.serialize(BeanSerializer.java:117)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:94)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:1)
at com.fasterxml.jackson.databind.ser.std.AsArraySerializerBase.serialize(AsArraySerializerB
ase.java:150)
at com.fasterxml.jackson.databind.ser.BeanPropertyWriter.serializeAsField(BeanPropertyWriter
.java:464)
at com.fasterxml.jackson.databind.ser.std.BeanSerializerBase.serializeFields(BeanSerializerB
ase.java:504)
at com.fasterxml.jackson.databind.ser.BeanSerializer.serialize(BeanSerializer.java:117)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:94)
at com.fasterxml.jackson.databind.ser.impl.IndexedListSerializer.serializeContents(IndexedLi
stSerializer.java:1)

[cowtowncoder]

From stack trace, looks like you were trying to create a java String for JSON, and you don't have enough heap to do that?
So you probably need to give JVM a bigger heap, or stream results out -- usually there isn't much need to create an intermediate String or byte[], but rather write contents out using OutputStream.

[psindrome]

The last heap size tried was at about 1200MB, the model was deserialized from xml and the error occurs while trying to serialize it to json. A conversion utility is the target application. 1200MB of heap space to convert a model got from 4 MB xml sounds a bit unsound. Do let me know of your thoughts. I have not done further investigation.

Will try the option of writing to os, if that if sufficient for our current use. Appreciate any further information if available.

[psindrome]

Note: xstream xml parser does the sesrialization of the same model very efficiently.

[psindrome]

There is surely something of interesting proportions here, I got a 2.3G file after writing the same model to the output stream.

[cowtowncoder]

The fundamental problem is that you are trying to create a huge big String here. Why are you doing that? The usual way is to serialize JSON in a file, network connection or whatever the destination is. Using intermediate String is very wasteful, and takes up lots of memory as you have found.

As to size: perhaps you have shared depencies (acyclic graph). If so, by default all referenced values are written out fully.
XStream can optionally indicate shared references using explicit reference semantics.

[psindrome]

Firstly, The seconds set of comments do not involve creating a string. 2.3G file resulted from writing the object to the stream. Its not a memory heap issue after that.

Secondly, I from much of the discussion surrounding this api, assumed that it would fully compatible with anything Xtream produced representing a model should also be supported by Jackson api.

Correct me if am wrong about either of the above.

[cowtowncoder]

Ok, with respect to size, initial code, understood. So size difference is present in resulting JSON. And the in-memory building was just exhibiting this odd ballooning of data.

As to second point: I am not sure where the idea of compatibility between XStream and Jackson came from -- as far as I know, XStream produces a strange kind of JSON, mapped to from XML representation (XStream is an XML library with some JSON conversion provided by Jettison). So, no, structures are not going to necessarily be similar. Both will be valid JSON of course.

In fact, model that XStream uses is pretty different, as it starts with XML model. Only in later stages does this get serialized as JSON, which results in some additional "non-JSON" things getting added (due to things like XML distinction between elements and attributes; as well as lack of array concept in XML).

From above I am guessing that the data being serialized does include shared objects (or perhaps even cycles?). If so, that could explain the difference, if XStream is configured to handle cyclic data structures: it can do this by using ids.
Jackson does not do this by default, although with Jackson 2.0 it is possible to handle Object Identity as well.
But this does require using @JsonIdentityInfo annotations.

[psindrome]

Hi,

The comments from your last response were helpful in terms of resolving our immediate issues. I will post the details of resolution in the context of the api and close the issue at the earliest. Thanks for your patience.

Regards,

[cowtowncoder]

Ok good -- glad you managed to get things working, and would definitely be interesting in learning what was done.
Usually this is very useful for other users as well, when they encounter similar issues.

[psindrome]

I will leave the details, after a quick chat with my team. Least I can do for the help offered.

[cowtowncoder]

I'll close this down to clean up list before release; still interested in details if those can be shared.

[JonasJurczok]

[cowtowncoder]

lol. That is... surprisingly close hit. :)

(I lived in Denver when I chose my nick for OSS work -- alternative to "cowtown coding" was "conman consulting" so I could have become "conmanconsult" had coin flip went the other way)

FWIW, such a stack trace might result from someone trying to parse a gigabyte file with encoding error, in which JSON String value does not end where it should.
Or someone just created malicious payload.

And there is sort of relevant newer issue to maybe add protection settings: #611

[JonasJurczok]

Man, you passed on conmanconsult? I have to steal that name for the future :D

The problem I have is that the object tree is extremely strangely formed. It is basically a tree but every object has a reference to a list with all objects that are common on some dimension. This is true for all objects for multiple dimensions.

So for every object Jackson finds multiple lists with all objects of the same dimension.
This is a type of infinite recursion that it simply cannot decode.

The source file is 50kb, the serializer crashed at 70gb of output.

I just skip the whole deserialisation stuff and solve the problem differently.

Thanks for the hint, though.