2-Way Audio In Home Assistant Using Frigate for Doorbird

[yvonneh7]

Hi,

I looked at your tutorial (https://www.youtube.com/watch?v=upXyBVMR4RM) and would like to use this for Doorbird. I have replaced "rtsp://admin:YourPassword@192.168.1.1:554/h264Preview_01_sub" with "rtsp://admin:YourPassword@IP_adress/mpeg/media.amp"

It works except for the audio. What is the configuration to enable audio for a Doorbird door station?

[AlexxIT]

I don't know what is Doorbird door station.

[yvonneh7]

Doorbird is just another manufacturer like Reolink. So it has also a doorbell camera with 2 way talk. The Doorbird documentation gives the following URLS:

LIVE AUDIO RECEIVE: http:///bha-api/audio-receive.cgi
LIVE AUDIO TRANSMIT: http:///bha-api/audio-transmit.cgi
LIVE VIDEO REQUEST: rtsp://:/mpeg/media.amp

I have tested a lot. But so far audio does not work. I would be very grateful for any help or ideas

[AlexxIT]

Most cameras on market don't support two way audio with some open protocols like RTSP.

PS. you should check stream info from go2rtc WebUI while stream is active.

[nisnu]

@yvonneh7 did you get this working? I would be interested about this approach as well.

[yvonneh7]

Unfortunately not. If you find a solution, please share it here.

[AlexxIT]

It's better to continue all discussion about this camera model in single place #1060

[oeiber]

@nisnu @yvonneh7
Please see #1060
Maybe you can also help improving backchannel audio for doorbird devices?