Improve Cut on Ramp

[MARIOBASZ]

Hi
Items
1- Simplify options Ramp = helix?
If angle = 90 degrees, it is plunge . Ramp angle parameter (prevent entering a value of 0); may or may not have a plunge option. 2- Normal ramp usage is in degrees. It depends on the material, not the tool diameter (except for very thin ones). Adopt this setting.
2- Currently the ramp speed is the same as normal. On my machine, I recently modified the ramp speed (temporarily setting it to 40% of the cutting speed).
3- Pending improvement: subdivide the segment if it's larger than needed for the ramp. Anyone interested in suggesting an improvement? Cheers.