Skip to content

Using iProxy to tether your iPad with your iPhone (warning: requires an additional device)

fixups edited this page Mar 22, 2012 · 4 revisions

Tethering your iPad with your iPhone requires an additional device which is used to establish the ad-hoc network. For example you can use a Mac for this, as explained here: once your Mac is connected to the iPhone you can add the iPad to the ad-hoc network.

Once the connexion has been established, in theory the additional device (f.e. the Mac) is not needed anymore and your iPhone and iPad are going to maintain the connexion by themselves.

This is only in theory. In practice the connexion is going to die in a few minutes, for whatever reason, and you will be unable to reconnect. This makes using this connexion unpractical, as you would not only need to carry the iPhone and the iPad, but also the Mac.

The solution I have found, which I still find more acceptable than paying an extra mobile subscription just to browse the net on my iPad while on the go, is to use an additional device: a portable Wifi router.

(Actually I cannot even pay my mobile provider to activate the tethering option in the iPhone: they refuse to do it. I would have to purchase a separate device and subscribe to an additional plan!!!)

So I use iProxy together with a Trendnet TEW-655BR3G portable Wifi router. You should be able to find it for less then $75. Any other portable Wifi router should work anyway. The requirements are:

  • the device should be small
  • it must have its own battery
  • you must be able to configure its basic settings (SSID, encryption)

I purchased the Trendnet because it was available at a nearby store. It turns out that it has a very good battery life: around 5 to 6 hours! It's much longer than advertised (2h30), probably because it is normally used with a 3G key, which it has to power. I do not have to plug a 3G key because the iPhone is the link to internet, so I'm getting more battery time. I have also configured it to disable what is not needed, which helps.

It is provided with both an AC and a car charger, which is great. Please note that it is not always provided with both, so check this out before purchasing.

Here is how to configure the 3 devices (the iPhone, the router and the iPad):

THE ROUTER

  • Disable Wifi N. Use only Wifi B/G since you need neither the extra speed of the N standard nor the extra range. This will save power.
  • Disable the ethernet port. This may also save power.
  • Tell it that the WAN is the ethernet port so it won't try to find an external 3G key on its USB port.
  • I have left the router's IP untouched: 192.168.10.1
  • Change the SSID to "iPhoneHotspot" for example.
  • Configure it to use encryption, at least WEP. You don't want everyone in the restaurant to suck on your data plan.

THE iPhone:

  • Connect to the "iPhoneHotspot" Wifi network (you will need to enter your WEP key)
  • Configure this connexion as static IP:
    • IP: 192.168.10.2
    • Mask: 255.255.255.0
  • Launch iProxy and turn the http switch on.
  • Once iProxy has been launched, you can switch to another application (requires iOS 4 or later). You can also turn your iPhone off (I mean in sleep mode) and keep it in your pocket.

THE iPad:

  • Connect to the "iPhoneHotspot" Wifi network (you will need to enter your WEP key)
  • Configure this connexion as static IP:
    • IP: 192.168.10.3
    • Mask: 255.255.255.0
  • HTTP proxy:
    • Manual
    • Server: 192.168.10.2 (yes, it's the iPhone IP address)
    • Port: 8888
    • Authentification: OFF

At that point, the iPad will be able to use the iPhone's 3G connexion to surf the web with Safari. It will not be able to send or receive emails, or iMessages. I don't care much, I can do these directly on the iPhone. Or I can use GMail by its web access. What I really wanted was to use the iPad to read web pages on the larger screen.

I have however noticed that I could browse the App Store and even download/install apps when working under this setup!

If you have problems, try this:

  • Very often, loading a page doesn't work the first time. Just tap on the reload button.
  • In iProxy on the iPhone, turn the http switch off then on again.
  • On the iPhone, kill iProxy and restart it.
  • Don't listen to music on your iPhone: iProxy tricks the OS by playing silent music in order to stay active in the background. Playing music will stop iProxy. Just listen to the music on your iPad.

Clone this wiki locally