diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/hx5-as4630-48x1G+4x25G+2x100G.bcm b/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/hx5-as4630-48x1G+4x25G+2x100G.bcm new file mode 100755 index 00000000000..a7f89ba4c62 --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/hx5-as4630-48x1G+4x25G+2x100G.bcm @@ -0,0 +1,486 @@ +stable_size=71303168 + +#polarity/lanemap is using TH2 style. +core_clock_frequency=893 +dpp_clock_ratio=2:3 + +ptp_ts_pll_fref=50000000 +ptp_bs_fref_0=50000000 +ptp_bs_fref_1=50000000 + +#oversubscribe_mode=1 + +pbmp_xport_xe=0x1FFFFFFE000000000000 + +parity_enable=0 +mem_cache_enable=1 + +l2_mem_entries=32768 +#l3_mem_entries=49152 +#fpem_mem_entries=16384 +l2xmsg_mode=1 +port_flex_enable=1 + +#3x PM4x10Q (3 * 16 = 48 physical ports) +#Doesn't support oversubscribe in Q mode +#MCQ0 +port_gmii_mode_1=1 #Q mode + +#PHY4 U56 xx1, MDC/MDIO2, PHYADDR:0x00-0x07, 0x08 +port_phy_addr_1=0x40 +port_phy_addr_2=0x41 +port_phy_addr_3=0x42 +port_phy_addr_4=0x43 +port_phy_addr_5=0x44 +port_phy_addr_6=0x45 +port_phy_addr_7=0x46 +port_phy_addr_8=0x47 +phy_port_primary_and_offset_1=0x0100 +phy_port_primary_and_offset_2=0x0101 +phy_port_primary_and_offset_3=0x0102 +phy_port_primary_and_offset_4=0x0103 +phy_port_primary_and_offset_5=0x0104 +phy_port_primary_and_offset_6=0x0105 +phy_port_primary_and_offset_7=0x0106 +phy_port_primary_and_offset_8=0x0107 +dport_map_port_1=26 +dport_map_port_2=25 +dport_map_port_3=28 +dport_map_port_4=27 +dport_map_port_5=30 +dport_map_port_6=29 +dport_map_port_7=32 +dport_map_port_8=31 +portmap_1=1:1 +portmap_2=2:1 +portmap_3=3:1 +portmap_4=4:1 +portmap_5=5:1 +portmap_6=6:1 +portmap_7=7:1 +portmap_8=8:1 +phy_chain_rx_lane_map_physical{1.0}=0x3210 +phy_chain_rx_lane_map_physical{2.0}=0x3210 +phy_chain_rx_lane_map_physical{3.0}=0x3210 +phy_chain_rx_lane_map_physical{4.0}=0x3210 +phy_chain_rx_lane_map_physical{5.0}=0x3210 +phy_chain_rx_lane_map_physical{6.0}=0x3210 +phy_chain_rx_lane_map_physical{7.0}=0x3210 +phy_chain_rx_lane_map_physical{8.0}=0x3210 +phy_chain_tx_lane_map_physical{1.0}=0x3210 +phy_chain_tx_lane_map_physical{2.0}=0x3210 +phy_chain_tx_lane_map_physical{3.0}=0x3210 +phy_chain_tx_lane_map_physical{4.0}=0x3210 +phy_chain_tx_lane_map_physical{5.0}=0x3210 +phy_chain_tx_lane_map_physical{6.0}=0x3210 +phy_chain_tx_lane_map_physical{7.0}=0x3210 +phy_chain_tx_lane_map_physical{8.0}=0x3210 +phy_chain_rx_polarity_flip_physical{1.0}=0x0 +phy_chain_rx_polarity_flip_physical{2.0}=0x0 +phy_chain_rx_polarity_flip_physical{3.0}=0x0 +phy_chain_rx_polarity_flip_physical{4.0}=0x0 +phy_chain_rx_polarity_flip_physical{5.0}=0x0 +phy_chain_rx_polarity_flip_physical{6.0}=0x0 +phy_chain_rx_polarity_flip_physical{7.0}=0x0 +phy_chain_rx_polarity_flip_physical{8.0}=0x0 +phy_chain_tx_polarity_flip_physical{1.0}=0x0 +phy_chain_tx_polarity_flip_physical{2.0}=0x0 +phy_chain_tx_polarity_flip_physical{3.0}=0x0 +phy_chain_tx_polarity_flip_physical{4.0}=0x0 +phy_chain_tx_polarity_flip_physical{5.0}=0x0 +phy_chain_tx_polarity_flip_physical{6.0}=0x0 +phy_chain_tx_polarity_flip_physical{7.0}=0x0 +phy_chain_tx_polarity_flip_physical{8.0}=0x0 + + +#PHY5 U57 x1x, MDC/MDIO2, PHYADDR:0x09-0x10, 0x11 +port_phy_addr_9=0x49 +port_phy_addr_10=0x4A +port_phy_addr_11=0x4B +port_phy_addr_12=0x4C +port_phy_addr_13=0x4D +port_phy_addr_14=0x4E +port_phy_addr_15=0x4F +port_phy_addr_16=0x50 +phy_port_primary_and_offset_9=0x0900 +phy_port_primary_and_offset_10=0x0901 +phy_port_primary_and_offset_11=0x0902 +phy_port_primary_and_offset_12=0x0903 +phy_port_primary_and_offset_13=0x0904 +phy_port_primary_and_offset_14=0x0905 +phy_port_primary_and_offset_15=0x0906 +phy_port_primary_and_offset_16=0x0907 +dport_map_port_9=34 +dport_map_port_10=33 +dport_map_port_11=36 +dport_map_port_12=35 +dport_map_port_13=38 +dport_map_port_14=37 +dport_map_port_15=40 +dport_map_port_16=39 +portmap_9=9:1 +portmap_10=10:1 +portmap_11=11:1 +portmap_12=12:1 +portmap_13=13:1 +portmap_14=14:1 +portmap_15=15:1 +portmap_16=16:1 +phy_chain_rx_lane_map_physical{9.0}=0x3210 +phy_chain_rx_lane_map_physical{10.0}=0x3210 +phy_chain_rx_lane_map_physical{11.0}=0x3210 +phy_chain_rx_lane_map_physical{12.0}=0x3210 +phy_chain_rx_lane_map_physical{13.0}=0x3210 +phy_chain_rx_lane_map_physical{14.0}=0x3210 +phy_chain_rx_lane_map_physical{15.0}=0x3210 +phy_chain_rx_lane_map_physical{16.0}=0x3210 +phy_chain_tx_lane_map_physical{9.0}=0x3210 +phy_chain_tx_lane_map_physical{10.0}=0x3210 +phy_chain_tx_lane_map_physical{11.0}=0x3210 +phy_chain_tx_lane_map_physical{12.0}=0x3210 +phy_chain_tx_lane_map_physical{13.0}=0x3210 +phy_chain_tx_lane_map_physical{14.0}=0x3210 +phy_chain_tx_lane_map_physical{15.0}=0x3210 +phy_chain_tx_lane_map_physical{16.0}=0x3210 +phy_chain_rx_polarity_flip_physical{9.0}=0x0 +phy_chain_rx_polarity_flip_physical{10.0}=0x0 +phy_chain_rx_polarity_flip_physical{11.0}=0x0 +phy_chain_rx_polarity_flip_physical{12.0}=0x0 +phy_chain_rx_polarity_flip_physical{13.0}=0x0 +phy_chain_rx_polarity_flip_physical{14.0}=0x0 +phy_chain_rx_polarity_flip_physical{15.0}=0x0 +phy_chain_rx_polarity_flip_physical{16.0}=0x0 +phy_chain_tx_polarity_flip_physical{9.0}=0x0 +phy_chain_tx_polarity_flip_physical{10.0}=0x0 +phy_chain_tx_polarity_flip_physical{11.0}=0x0 +phy_chain_tx_polarity_flip_physical{12.0}=0x0 +phy_chain_tx_polarity_flip_physical{13.0}=0x0 +phy_chain_tx_polarity_flip_physical{14.0}=0x0 +phy_chain_tx_polarity_flip_physical{15.0}=0x0 +phy_chain_tx_polarity_flip_physical{16.0}=0x0 + +#MCQ1 +port_gmii_mode_17=1 #Q mode + +#PHY6 U58 11x, MDC/MDIO2, PHYADDR:0x12-0x19, 0x1A +port_phy_addr_17=0x52 +port_phy_addr_18=0x53 +port_phy_addr_19=0x54 +port_phy_addr_20=0x55 +port_phy_addr_21=0x56 +port_phy_addr_22=0x57 +port_phy_addr_23=0x58 +port_phy_addr_24=0x59 +phy_port_primary_and_offset_17=0x1100 +phy_port_primary_and_offset_18=0x1101 +phy_port_primary_and_offset_19=0x1102 +phy_port_primary_and_offset_20=0x1103 +phy_port_primary_and_offset_21=0x1104 +phy_port_primary_and_offset_22=0x1105 +phy_port_primary_and_offset_23=0x1106 +phy_port_primary_and_offset_24=0x1107 +dport_map_port_17=42 +dport_map_port_18=41 +dport_map_port_19=44 +dport_map_port_20=43 +dport_map_port_21=46 +dport_map_port_22=45 +dport_map_port_23=48 +dport_map_port_24=47 +portmap_17=17:1 +portmap_18=18:1 +portmap_19=19:1 +portmap_20=20:1 +portmap_21=21:1 +portmap_22=22:1 +portmap_23=23:1 +portmap_24=24:1 +phy_chain_rx_lane_map_physical{17.0}=0x3210 +phy_chain_rx_lane_map_physical{18.0}=0x3210 +phy_chain_rx_lane_map_physical{19.0}=0x3210 +phy_chain_rx_lane_map_physical{20.0}=0x3210 +phy_chain_rx_lane_map_physical{21.0}=0x3210 +phy_chain_rx_lane_map_physical{22.0}=0x3210 +phy_chain_rx_lane_map_physical{23.0}=0x3210 +phy_chain_rx_lane_map_physical{24.0}=0x3210 +phy_chain_tx_lane_map_physical{17.0}=0x3210 +phy_chain_tx_lane_map_physical{18.0}=0x3210 +phy_chain_tx_lane_map_physical{19.0}=0x3210 +phy_chain_tx_lane_map_physical{20.0}=0x3210 +phy_chain_tx_lane_map_physical{21.0}=0x3210 +phy_chain_tx_lane_map_physical{22.0}=0x3210 +phy_chain_tx_lane_map_physical{23.0}=0x3210 +phy_chain_tx_lane_map_physical{24.0}=0x3210 +phy_chain_rx_polarity_flip_physical{17.0}=0x0 +phy_chain_rx_polarity_flip_physical{18.0}=0x0 +phy_chain_rx_polarity_flip_physical{19.0}=0x0 +phy_chain_rx_polarity_flip_physical{20.0}=0x0 +phy_chain_rx_polarity_flip_physical{21.0}=0x0 +phy_chain_rx_polarity_flip_physical{22.0}=0x0 +phy_chain_rx_polarity_flip_physical{23.0}=0x0 +phy_chain_rx_polarity_flip_physical{24.0}=0x0 +phy_chain_tx_polarity_flip_physical{17.0}=0x0 +phy_chain_tx_polarity_flip_physical{18.0}=0x0 +phy_chain_tx_polarity_flip_physical{19.0}=0x0 +phy_chain_tx_polarity_flip_physical{20.0}=0x0 +phy_chain_tx_polarity_flip_physical{21.0}=0x0 +phy_chain_tx_polarity_flip_physical{22.0}=0x0 +phy_chain_tx_polarity_flip_physical{23.0}=0x0 +phy_chain_tx_polarity_flip_physical{24.0}=0x0 + +#PHY1 U53 xx1, MDC/MDIO0, PHYADDR:0x00-0x07, 0x08 +port_phy_addr_25=0x00 +port_phy_addr_26=0x01 +port_phy_addr_27=0x02 +port_phy_addr_28=0x03 +port_phy_addr_29=0x04 +port_phy_addr_30=0x05 +port_phy_addr_31=0x06 +port_phy_addr_32=0x07 +phy_port_primary_and_offset_25=0x1900 +phy_port_primary_and_offset_26=0x1901 +phy_port_primary_and_offset_27=0x1902 +phy_port_primary_and_offset_28=0x1903 +phy_port_primary_and_offset_29=0x1904 +phy_port_primary_and_offset_30=0x1905 +phy_port_primary_and_offset_31=0x1906 +phy_port_primary_and_offset_32=0x1907 +dport_map_port_25=2 +dport_map_port_26=1 +dport_map_port_27=4 +dport_map_port_28=3 +dport_map_port_29=6 +dport_map_port_30=5 +dport_map_port_31=8 +dport_map_port_32=7 +portmap_25=25:1 +portmap_26=26:1 +portmap_27=27:1 +portmap_28=28:1 +portmap_29=29:1 +portmap_30=30:1 +portmap_31=31:1 +portmap_32=32:1 +phy_chain_rx_lane_map_physical{25.0}=0x3210 +phy_chain_rx_lane_map_physical{26.0}=0x3210 +phy_chain_rx_lane_map_physical{27.0}=0x3210 +phy_chain_rx_lane_map_physical{28.0}=0x3210 +phy_chain_rx_lane_map_physical{29.0}=0x3210 +phy_chain_rx_lane_map_physical{30.0}=0x3210 +phy_chain_rx_lane_map_physical{31.0}=0x3210 +phy_chain_rx_lane_map_physical{32.0}=0x3210 +phy_chain_tx_lane_map_physical{25.0}=0x3210 +phy_chain_tx_lane_map_physical{26.0}=0x3210 +phy_chain_tx_lane_map_physical{27.0}=0x3210 +phy_chain_tx_lane_map_physical{28.0}=0x3210 +phy_chain_tx_lane_map_physical{29.0}=0x3210 +phy_chain_tx_lane_map_physical{30.0}=0x3210 +phy_chain_tx_lane_map_physical{31.0}=0x3210 +phy_chain_tx_lane_map_physical{32.0}=0x3210 +phy_chain_rx_polarity_flip_physical{25.0}=0x0 +phy_chain_rx_polarity_flip_physical{26.0}=0x0 +phy_chain_rx_polarity_flip_physical{27.0}=0x0 +phy_chain_rx_polarity_flip_physical{28.0}=0x0 +phy_chain_rx_polarity_flip_physical{29.0}=0x0 +phy_chain_rx_polarity_flip_physical{30.0}=0x0 +phy_chain_rx_polarity_flip_physical{31.0}=0x0 +phy_chain_rx_polarity_flip_physical{32.0}=0x0 +phy_chain_tx_polarity_flip_physical{25.0}=0x0 +phy_chain_tx_polarity_flip_physical{26.0}=0x0 +phy_chain_tx_polarity_flip_physical{27.0}=0x0 +phy_chain_tx_polarity_flip_physical{28.0}=0x0 +phy_chain_tx_polarity_flip_physical{29.0}=0x0 +phy_chain_tx_polarity_flip_physical{30.0}=0x0 +phy_chain_tx_polarity_flip_physical{31.0}=0x0 +phy_chain_tx_polarity_flip_physical{32.0}=0x0 + +#MCQ2 +port_gmii_mode_33=1 #Q mode + +#PHY2 U54 x1x, MDC/MDIO0, PHYADDR:0x09-0x10, 0x11 +port_phy_addr_33=0x0D +port_phy_addr_34=0x0E +port_phy_addr_35=0x0F +port_phy_addr_36=0x10 +port_phy_addr_37=0x09 +port_phy_addr_38=0x0A +port_phy_addr_39=0x0B +port_phy_addr_40=0x0C +phy_port_primary_and_offset_33=0x2504 +phy_port_primary_and_offset_34=0x2505 +phy_port_primary_and_offset_35=0x2506 +phy_port_primary_and_offset_36=0x2507 +phy_port_primary_and_offset_37=0x2500 +phy_port_primary_and_offset_38=0x2501 +phy_port_primary_and_offset_39=0x2502 +phy_port_primary_and_offset_40=0x2503 +dport_map_port_33=14 +dport_map_port_34=13 +dport_map_port_35=16 +dport_map_port_36=15 +dport_map_port_37=10 +dport_map_port_38=9 +dport_map_port_39=12 +dport_map_port_40=11 +portmap_33=33:1 +portmap_34=34:1 +portmap_35=35:1 +portmap_36=36:1 +portmap_37=37:1 +portmap_38=38:1 +portmap_39=39:1 +portmap_40=40:1 +phy_chain_rx_lane_map_physical{33.0}=0x3210 +phy_chain_rx_lane_map_physical{34.0}=0x3210 +phy_chain_rx_lane_map_physical{35.0}=0x3210 +phy_chain_rx_lane_map_physical{36.0}=0x3210 +phy_chain_rx_lane_map_physical{37.0}=0x3210 +phy_chain_rx_lane_map_physical{38.0}=0x3210 +phy_chain_rx_lane_map_physical{39.0}=0x3210 +phy_chain_rx_lane_map_physical{40.0}=0x3210 +phy_chain_tx_lane_map_physical{33.0}=0x3210 +phy_chain_tx_lane_map_physical{34.0}=0x3210 +phy_chain_tx_lane_map_physical{35.0}=0x3210 +phy_chain_tx_lane_map_physical{36.0}=0x3210 +phy_chain_tx_lane_map_physical{37.0}=0x3210 +phy_chain_tx_lane_map_physical{38.0}=0x3210 +phy_chain_tx_lane_map_physical{39.0}=0x3210 +phy_chain_tx_lane_map_physical{40.0}=0x3210 +phy_chain_rx_polarity_flip_physical{33.0}=0x1 +phy_chain_rx_polarity_flip_physical{34.0}=0x1 +phy_chain_rx_polarity_flip_physical{35.0}=0x1 +phy_chain_rx_polarity_flip_physical{36.0}=0x1 +phy_chain_rx_polarity_flip_physical{37.0}=0x1 +phy_chain_rx_polarity_flip_physical{38.0}=0x1 +phy_chain_rx_polarity_flip_physical{39.0}=0x1 +phy_chain_rx_polarity_flip_physical{40.0}=0x1 +phy_chain_tx_polarity_flip_physical{33.0}=0x1 +phy_chain_tx_polarity_flip_physical{34.0}=0x1 +phy_chain_tx_polarity_flip_physical{35.0}=0x1 +phy_chain_tx_polarity_flip_physical{36.0}=0x1 +phy_chain_tx_polarity_flip_physical{37.0}=0x1 +phy_chain_tx_polarity_flip_physical{38.0}=0x1 +phy_chain_tx_polarity_flip_physical{39.0}=0x1 +phy_chain_tx_polarity_flip_physical{40.0}=0x1 + +#PHY3 U55 11x, MDC/MDIO0, PHYADDR:0x12-0x19, 0x1A +port_phy_addr_41=0x16 +port_phy_addr_42=0x17 +port_phy_addr_43=0x18 +port_phy_addr_44=0x19 +port_phy_addr_45=0x12 +port_phy_addr_46=0x13 +port_phy_addr_47=0x14 +port_phy_addr_48=0x15 +phy_port_primary_and_offset_41=0x2D00 +phy_port_primary_and_offset_42=0x2D01 +phy_port_primary_and_offset_43=0x2D02 +phy_port_primary_and_offset_44=0x2D03 +phy_port_primary_and_offset_45=0x2D04 +phy_port_primary_and_offset_46=0x2D05 +phy_port_primary_and_offset_47=0x2D06 +phy_port_primary_and_offset_48=0x2D07 +dport_map_port_41=22 +dport_map_port_42=21 +dport_map_port_43=24 +dport_map_port_44=23 +dport_map_port_45=18 +dport_map_port_46=17 +dport_map_port_47=20 +dport_map_port_48=19 +portmap_41=41:1 +portmap_42=42:1 +portmap_43=43:1 +portmap_44=44:1 +portmap_45=45:1 +portmap_46=46:1 +portmap_47=47:1 +portmap_48=48:1 +phy_chain_rx_lane_map_physical{41.0}=0x3210 +phy_chain_rx_lane_map_physical{42.0}=0x3210 +phy_chain_rx_lane_map_physical{43.0}=0x3210 +phy_chain_rx_lane_map_physical{44.0}=0x3210 +phy_chain_rx_lane_map_physical{45.0}=0x3210 +phy_chain_rx_lane_map_physical{46.0}=0x3210 +phy_chain_rx_lane_map_physical{47.0}=0x3210 +phy_chain_rx_lane_map_physical{48.0}=0x3210 +phy_chain_tx_lane_map_physical{41.0}=0x3210 +phy_chain_tx_lane_map_physical{42.0}=0x3210 +phy_chain_tx_lane_map_physical{43.0}=0x3210 +phy_chain_tx_lane_map_physical{44.0}=0x3210 +phy_chain_tx_lane_map_physical{45.0}=0x3210 +phy_chain_tx_lane_map_physical{46.0}=0x3210 +phy_chain_tx_lane_map_physical{47.0}=0x3210 +phy_chain_tx_lane_map_physical{48.0}=0x3210 +phy_chain_rx_polarity_flip_physical{41.0}=0x1 +phy_chain_rx_polarity_flip_physical{42.0}=0x1 +phy_chain_rx_polarity_flip_physical{43.0}=0x1 +phy_chain_rx_polarity_flip_physical{44.0}=0x1 +phy_chain_rx_polarity_flip_physical{45.0}=0x1 +phy_chain_rx_polarity_flip_physical{46.0}=0x1 +phy_chain_rx_polarity_flip_physical{47.0}=0x1 +phy_chain_rx_polarity_flip_physical{48.0}=0x1 +phy_chain_tx_polarity_flip_physical{41.0}=0x1 +phy_chain_tx_polarity_flip_physical{42.0}=0x1 +phy_chain_tx_polarity_flip_physical{43.0}=0x1 +phy_chain_tx_polarity_flip_physical{44.0}=0x1 +phy_chain_tx_polarity_flip_physical{45.0}=0x1 +phy_chain_tx_polarity_flip_physical{46.0}=0x1 +phy_chain_tx_polarity_flip_physical{47.0}=0x1 +phy_chain_tx_polarity_flip_physical{48.0}=0x1 + +#3x PM4x25 (3 * 4 = 12 physical ports) +#FC0 +dport_map_port_49=51 +dport_map_port_50=50 +dport_map_port_51=49 +dport_map_port_52=52 +portmap_49=65:25 +portmap_50=66:25 +portmap_51=67:25 +portmap_52=68:25 +#FC1 +dport_map_port_53=57 +dport_map_port_54=58 +dport_map_port_55=59 +dport_map_port_56=60 +portmap_53=69:100:4 +#portmap_55=71:50 +#portmap_54=70:25 +#portmap_55=71:25 +#portmap_56=72:25 +#FC2 +dport_map_port_57=53 +dport_map_port_58=54 +dport_map_port_59=55 +dport_map_port_60=56 +portmap_57=73:100:4 +#portmap_59=75:50 +#portmap_58=74:25 +#portmap_59=75:25 +#portmap_60=76:25 + +#4x PM4x10 (4 * 4 = 16 physical ports) +#MC0 No connection +#MC1 No connection +#MC2 No connection +#MC3 No connection +#portmap_=49:10 +#portmap_=50:10 +#portmap_=51:10 +#portmap_=52:10 + +#portmap_=53:10 +#portmap_=54:10 +#portmap_=55:10 +#portmap_=56:10 + +#portmap_=57:10 +#portmap_=58:10 +#portmap_=59:10 +#portmap_=60:10 + +#portmap_=61:10 +#portmap_=62:10 +#portmap_=63:10 +#portmap_=64:10 diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/port_config.ini b/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/port_config.ini new file mode 100755 index 00000000000..d008d016ef5 --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/port_config.ini @@ -0,0 +1,55 @@ +# name lanes alias index +Ethernet0 26 thousandE1 0 +Ethernet1 25 thousandE2 1 +Ethernet2 28 thousandE3 2 +Ethernet3 27 thousandE4 3 +Ethernet4 30 thousandE5 4 +Ethernet5 29 thousandE6 5 +Ethernet6 32 thousandE7 6 +Ethernet7 31 thousandE8 7 +Ethernet8 38 thousandE9 8 +Ethernet9 37 thousandE10 9 +Ethernet10 40 thousandE11 10 +Ethernet11 39 thousandE12 11 +Ethernet12 34 thousandE13 12 +Ethernet13 33 thousandE14 13 +Ethernet14 36 thousandE15 14 +Ethernet15 35 thousandE16 15 +Ethernet16 46 thousandE17 16 +Ethernet17 45 thousandE18 17 +Ethernet18 48 thousandE19 18 +Ethernet19 47 thousandE20 19 +Ethernet20 42 thousandE21 20 +Ethernet21 41 thousandE22 21 +Ethernet22 44 thousandE23 22 +Ethernet23 43 thousandE24 23 +Ethernet24 2 thousandE25 24 +Ethernet25 1 thousandE26 25 +Ethernet26 4 thousandE27 26 +Ethernet27 3 thousandE28 27 +Ethernet28 6 thousandE29 28 +Ethernet29 5 thousandE30 29 +Ethernet30 8 thousandE31 30 +Ethernet31 7 thousandE32 31 +Ethernet32 10 thousandE33 32 +Ethernet33 9 thousandE34 33 +Ethernet34 12 thousandE35 34 +Ethernet35 11 thousandE36 35 +Ethernet36 14 thousandE37 36 +Ethernet37 13 thousandE38 37 +Ethernet38 16 thousandE39 38 +Ethernet39 15 thousandE40 39 +Ethernet40 18 thousandE41 40 +Ethernet41 17 thousandE42 41 +Ethernet42 20 thousandE43 42 +Ethernet43 19 thousandE44 43 +Ethernet44 22 thousandE45 44 +Ethernet45 21 thousandE46 45 +Ethernet46 24 thousandE47 46 +Ethernet47 23 thousandE48 47 +Ethernet48 67 twentyfiveGigE49 48 +Ethernet49 66 twentyfiveGigE50 49 +Ethernet50 65 twentyfiveGigE51 50 +Ethernet51 68 twentyfiveGigE52 51 +Ethernet52 73,74,75,76 hundredGigE53 52 +Ethernet56 69,70,71,72 hundredGigE54 56 diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/sai.profile b/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/sai.profile new file mode 100755 index 00000000000..5329410fe8b --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/Accton-AS4630-54PE/sai.profile @@ -0,0 +1 @@ +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/hx5-as4630-48x1G+4x25G+2x100G.bcm diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/default_sku b/device/accton/x86_64-accton_as4630_54pe-r0/default_sku new file mode 100755 index 00000000000..64e4213bdc7 --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/default_sku @@ -0,0 +1 @@ +Accton-AS4630-54PE t1 diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/installer.conf b/device/accton/x86_64-accton_as4630_54pe-r0/installer.conf new file mode 100755 index 00000000000..925a32fc0c3 --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/installer.conf @@ -0,0 +1,3 @@ +CONSOLE_PORT=0x3f8 +CONSOLE_DEV=0 +CONSOLE_SPEED=115200 diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/led_proc_init.soc b/device/accton/x86_64-accton_as4630_54pe-r0/led_proc_init.soc new file mode 100755 index 00000000000..4fa004f5d13 --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/led_proc_init.soc @@ -0,0 +1,2 @@ +led start +led auto on diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/plugins/eeprom.py b/device/accton/x86_64-accton_as4630_54pe-r0/plugins/eeprom.py new file mode 100755 index 00000000000..0d7def70fdc --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/plugins/eeprom.py @@ -0,0 +1,21 @@ +#!/usr/bin/env python + +try: + import exceptions + import binascii + import time + import optparse + import warnings + import os + import sys + from sonic_eeprom import eeprom_base + from sonic_eeprom import eeprom_tlvinfo + import subprocess +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + +class board(eeprom_tlvinfo.TlvInfoDecoder): + _TLV_INFO_MAX_LEN = 256 + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/bus/i2c/devices/1-0057/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/plugins/psuutil.py b/device/accton/x86_64-accton_as4630_54pe-r0/plugins/psuutil.py new file mode 100755 index 00000000000..a646981334e --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/plugins/psuutil.py @@ -0,0 +1,61 @@ +#!/usr/bin/env python + +############################################################################# +# Accton +# +# Module contains an implementation of SONiC PSU Base API and +# provides the PSUs status which are available in the platform +# +############################################################################# + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError (str(e) + "- required module not found") + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + def __init__(self): + PsuBase.__init__(self) + + self.psu_path = "/sys/bus/i2c/devices/" + self.psu_presence = "/psu_present" + self.psu_oper_status = "/psu_power_good" + self.psu_mapping = { + 1: "10-0050", + 2: "11-0051", + } + + def get_num_psus(self): + return len(self.psu_mapping) + + def get_psu_status(self, index): + if index is None: + return False + + status = 0 + node = self.psu_path + self.psu_mapping[index]+self.psu_oper_status + try: + with open(node, 'r') as power_status: + status = int(power_status.read()) + except IOError: + return False + + return status == 1 + + def get_psu_presence(self, index): + if index is None: + return False + + status = 0 + node = self.psu_path + self.psu_mapping[index] + self.psu_presence + try: + with open(node, 'r') as presence_status: + status = int(presence_status.read()) + except IOError: + return False + + return status == 1 diff --git a/device/accton/x86_64-accton_as4630_54pe-r0/plugins/sfputil.py b/device/accton/x86_64-accton_as4630_54pe-r0/plugins/sfputil.py new file mode 100755 index 00000000000..69c2870669e --- /dev/null +++ b/device/accton/x86_64-accton_as4630_54pe-r0/plugins/sfputil.py @@ -0,0 +1,103 @@ +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + + PORT_START = 48 + PORT_END = 53 + PORTS_IN_BLOCK = 54 + + BASE_OOM_PATH = "/sys/bus/i2c/devices/{0}-0050/" + BASE_CPLD_PATH = "/sys/bus/i2c/devices/3-0060/" + + _port_to_is_present = {} + _port_to_lp_mode = {} + + _port_to_eeprom_mapping = {} + _port_to_i2c_mapping = { + 48: [18], + 49: [19], + 50: [20], + 51: [21], + 52: [22], + 53: [23], + } + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(self.PORT_START, self.PORTS_IN_BLOCK + 1) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + def __init__(self): + eeprom_path = self.BASE_OOM_PATH + "eeprom" + + for x in range(0, self.port_end+1): + if x < 48: + self.port_to_eeprom_mapping[x] = eeprom_path.format(0) + else: + self.port_to_eeprom_mapping[x] = eeprom_path.format( + self._port_to_i2c_mapping[x][0]) + + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + present_path = self.BASE_CPLD_PATH + "module_present_" + str(port_num+1) + self.__port_to_is_present = present_path + + try: + val_file = open(self.__port_to_is_present) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + # content is a string, either "0" or "1" + if content == "1": + return True + + return False + + def get_low_power_mode(self, port_num): + raise NotImplementedError + + def set_low_power_mode(self, port_num, lpmode): + raise NotImplementedError + + def reset(self, port_num): + raise NotImplementedError + + def get_transceiver_change_event(self): + """ + TODO: This function need to be implemented + when decide to support monitoring SFP(Xcvrd) + on this platform. + """ + raise NotImplementedError diff --git a/platform/broadcom/one-image.mk b/platform/broadcom/one-image.mk index a277c6f5929..fe4d1be96ad 100755 --- a/platform/broadcom/one-image.mk +++ b/platform/broadcom/one-image.mk @@ -22,6 +22,7 @@ $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(DELL_S6000_PLATFORM_MODULE) \ $(ACCTON_AS7716_32XB_PLATFORM_MODULE) \ $(ACCTON_AS6712_32X_PLATFORM_MODULE) \ $(ACCTON_AS7726_32X_PLATFORM_MODULE) \ + $(ACCTON_AS4630_54PE_PLATFORM_MODULE) \ $(ACCTON_MINIPACK_PLATFORM_MODULE) \ $(INVENTEC_D7032Q28B_PLATFORM_MODULE) \ $(INVENTEC_D7054Q28B_PLATFORM_MODULE) \ diff --git a/platform/broadcom/platform-modules-accton.mk b/platform/broadcom/platform-modules-accton.mk index 76ef6ae3ccd..db169a1fe14 100755 --- a/platform/broadcom/platform-modules-accton.mk +++ b/platform/broadcom/platform-modules-accton.mk @@ -9,6 +9,7 @@ ACCTON_AS7326_56X_PLATFORM_MODULE_VERSION = 1.1 ACCTON_AS7716_32XB_PLATFORM_MODULE_VERSION = 1.1 ACCTON_AS6712_32X_PLATFORM_MODULE_VERSION = 1.1 ACCTON_AS7726_32X_PLATFORM_MODULE_VERSION = 1.1 +ACCTON_AS4630_54PE_PLATFORM_MODULE_VERSION = 1.1 ACCTON_MINIPACK_PLATFORM_MODULE_VERSION = 1.1 export ACCTON_AS7712_32X_PLATFORM_MODULE_VERSION @@ -20,6 +21,7 @@ export ACCTON_AS7326_56X_PLATFORM_MODULE_VERSION export ACCTON_AS7716_32XB_PLATFORM_MODULE_VERSION export ACCTON_AS6712_32X_PLATFORM_MODULE_VERSION export ACCTON_AS7726_32X_PLATFORM_MODULE_VERSION +export ACCTON_AS4630_54PE_PLATFORM_MODULE_VERSION export ACCTON_MINIPACK_PLATFORM_MODULE_VERSION ACCTON_AS7712_32X_PLATFORM_MODULE = sonic-platform-accton-as7712-32x_$(ACCTON_AS7712_32X_PLATFORM_MODULE_VERSION)_amd64.deb @@ -60,6 +62,11 @@ ACCTON_AS7726_32X_PLATFORM_MODULE = sonic-platform-accton-as7726-32x_$(ACCTON_AS $(ACCTON_AS7726_32X_PLATFORM_MODULE)_PLATFORM = x86_64-accton_as7726_32x-r0 $(eval $(call add_extra_package,$(ACCTON_AS7712_32X_PLATFORM_MODULE),$(ACCTON_AS7726_32X_PLATFORM_MODULE))) +ACCTON_AS4630_54PE_PLATFORM_MODULE = sonic-platform-accton-as4630-54pe_$(ACCTON_AS4630_54PE_PLATFORM_MODULE_VERSION)_amd64.deb +$(ACCTON_AS4630_54PE_PLATFORM_MODULE)_PLATFORM = x86_64-accton_as4630_54pe-r0 +$(eval $(call add_extra_package,$(ACCTON_AS7712_32X_PLATFORM_MODULE),$(ACCTON_AS4630_54PE_PLATFORM_MODULE))) + + ACCTON_MINIPACK_PLATFORM_MODULE = sonic-platform-accton-minipack_$(ACCTON_MINIPACK_PLATFORM_MODULE_VERSION)_amd64.deb $(ACCTON_MINIPACK_PLATFORM_MODULE)_PLATFORM = x86_64-accton_minipack-r0 $(eval $(call add_extra_package,$(ACCTON_AS7712_32X_PLATFORM_MODULE),$(ACCTON_MINIPACK_PLATFORM_MODULE))) diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/__init__.py new file mode 100755 index 00000000000..e69de29bb2d diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/fanutil.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/fanutil.py new file mode 100755 index 00000000000..ca0f3f9da1e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/fanutil.py @@ -0,0 +1,251 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# 12/03/2018: Jostar modify for as7726_32 +# ------------------------------------------------------------------ + +try: + import time + import logging + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class FanUtil(object): + """Platform-specific FanUtil class""" + + FAN_NUM_ON_MAIN_BROAD = 6 + FAN_NUM_1_IDX = 1 + FAN_NUM_2_IDX = 2 + FAN_NUM_3_IDX = 3 + FAN_NUM_4_IDX = 4 + FAN_NUM_5_IDX = 5 + FAN_NUM_6_IDX = 6 + + FAN_NODE_NUM_OF_MAP = 2 + FAN_NODE_FAULT_IDX_OF_MAP = 1 + FAN_NODE_DIR_IDX_OF_MAP = 2 + + BASE_VAL_PATH = '/sys/bus/i2c/devices/54-0066/{0}' + FAN_DUTY_PATH = '/sys/bus/i2c/devices/54-0066/fan_duty_cycle_percentage' + + #logfile = '' + #loglevel = logging.INFO + + """ Dictionary where + key1 = fan id index (integer) starting from 1 + key2 = fan node index (interger) starting from 1 + value = path to fan device file (string) """ + _fan_to_device_path_mapping = {} + +#fan1_direction +#fan1_fault +#fan1_present + + #(FAN_NUM_2_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan2_duty_cycle_percentage', + _fan_to_device_node_mapping = { + (FAN_NUM_1_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan1_fault', + (FAN_NUM_1_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan1_direction', + + (FAN_NUM_2_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan2_fault', + (FAN_NUM_2_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan2_direction', + + (FAN_NUM_3_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan3_fault', + (FAN_NUM_3_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan3_direction', + + (FAN_NUM_4_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan4_fault', + (FAN_NUM_4_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan4_direction', + + (FAN_NUM_5_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan5_fault', + (FAN_NUM_5_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan5_direction', + + (FAN_NUM_6_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan6_fault', + (FAN_NUM_6_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan6_direction', + } + + def _get_fan_to_device_node(self, fan_num, node_num): + return self._fan_to_device_node_mapping[(fan_num, node_num)] + + def _get_fan_node_val(self, fan_num, node_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + + try: + val_file = open(device_path, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + def _set_fan_node_val(self, fan_num, node_num, val): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + content = str(val) + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + try: + val_file = open(device_path, 'w') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + val_file.write(content) + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return True + + def __init__(self): + fan_path = self.BASE_VAL_PATH + + for fan_num in range(self.FAN_NUM_1_IDX, self.FAN_NUM_ON_MAIN_BROAD+1): + for node_num in range(self.FAN_NODE_FAULT_IDX_OF_MAP, self.FAN_NODE_NUM_OF_MAP+1): + self._fan_to_device_path_mapping[(fan_num, node_num)] = fan_path.format( + self._fan_to_device_node_mapping[(fan_num, node_num)]) + + def get_num_fans(self): + return self.FAN_NUM_ON_MAIN_BROAD + + def get_idx_fan_start(self): + return self.FAN_NUM_1_IDX + + def get_num_nodes(self): + return self.FAN_NODE_NUM_OF_MAP + + def get_idx_node_start(self): + return self.FAN_NODE_FAULT_IDX_OF_MAP + + def get_size_node_map(self): + return len(self._fan_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._fan_to_device_path_mapping) + + def get_fan_to_device_path(self, fan_num, node_num): + return self._fan_to_device_path_mapping[(fan_num, node_num)] + + def get_fan_fault(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_FAULT_IDX_OF_MAP) + + #def get_fan_speed(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FAN_NODE_SPEED_IDX_OF_MAP) + + def get_fan_dir(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_DIR_IDX_OF_MAP) + + def get_fan_duty_cycle(self): + #duty_path = self.FAN_DUTY_PATH + try: + val_file = open(self.FAN_DUTY_PATH) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + return int(content) + #self._get_fan_node_val(fan_num, self.FAN_NODE_DUTY_IDX_OF_MAP) +#static u32 reg_val_to_duty_cycle(u8 reg_val) +#{ +# reg_val &= FAN_DUTY_CYCLE_REG_MASK; +# return ((u32)(reg_val+1) * 625 + 75)/ 100; +#} +# + def set_fan_duty_cycle(self, val): + + try: + fan_file = open(self.FAN_DUTY_PATH, 'r+') + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + #val = ((val + 1 ) * 625 +75 ) / 100 + fan_file.write(str(val)) + fan_file.close() + return True + + #def get_fanr_fault(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FANR_NODE_FAULT_IDX_OF_MAP) + + def get_fanr_speed(self, fan_num): + return self._get_fan_node_val(fan_num, self.FANR_NODE_SPEED_IDX_OF_MAP) + + def get_fan_status(self, fan_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num, %d', fan_num) + return None + + if self.get_fan_fault(fan_num) is not None and self.get_fan_fault(fan_num) > 0: + logging.debug('GET. FAN fault. fan_num, %d', fan_num) + return False + + #if self.get_fanr_fault(fan_num) is not None and self.get_fanr_fault(fan_num) > 0: + # logging.debug('GET. FANR fault. fan_num, %d', fan_num) + # return False + + return True + +#def main(): +# fan = FanUtil() +# +# print 'get_size_node_map : %d' % fan.get_size_node_map() +# print 'get_size_path_map : %d' % fan.get_size_path_map() +# for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): +# for y in range(fan.get_idx_node_start(), fan.get_num_nodes()+1): +# print fan.get_fan_to_device_path(x, y) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/thermalutil.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/thermalutil.py new file mode 100755 index 00000000000..96163f1d63a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/classes/thermalutil.py @@ -0,0 +1,131 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018:Jostar modify for as7716_32x +# 12/03/2018:Jostar modify for as7726_32x thermal plan +# ------------------------------------------------------------------ + +try: + import os + import time + import logging + import glob + import commands + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +class ThermalUtil(object): + """Platform-specific ThermalUtil class""" + THERMAL_NUM_MAX = 5 + THERMAL_NUM_1_IDX = 1 # 1_ON_MAIN_BROAD. LM75 + THERMAL_NUM_2_IDX = 2 # 2_ON_MAIN_BROAD. LM75 + THERMAL_NUM_3_IDX = 3 # 3_ON_MAIN_BROAD. LM75 + THERMAL_NUM_4_IDX = 4 # 4_ON_MAIN_BROAD. LM75 + THERMAL_NUM_5_IDX = 5 # 5_ON_MAIN_BROAD. LM75 + + """ Dictionary where + key1 = thermal id index (integer) starting from 1 + value = path to fan device file (string) """ + #_thermal_to_device_path_mapping = {} + + _thermal_to_device_node_mapping = { + THERMAL_NUM_1_IDX: ['55', '48'], + THERMAL_NUM_2_IDX: ['55', '49'], + THERMAL_NUM_3_IDX: ['55', '4a'], + THERMAL_NUM_4_IDX: ['55', '4b'], + THERMAL_NUM_5_IDX: ['54', '4c'], + } + thermal_sysfspath ={ + THERMAL_NUM_1_IDX: ["/sys/bus/i2c/devices/55-0048/hwmon/hwmon4/temp1_input"], + THERMAL_NUM_2_IDX: ["/sys/bus/i2c/devices/55-0049/hwmon/hwmon5/temp1_input"], + THERMAL_NUM_3_IDX: ["/sys/bus/i2c/devices/55-004a/hwmon/hwmon6/temp1_input"], + THERMAL_NUM_4_IDX: ["/sys/bus/i2c/devices/55-004b/hwmon/hwmon7/temp1_input"], + THERMAL_NUM_5_IDX: ["/sys/bus/i2c/devices/54-004c/hwmon/hwmon3/temp1_input"], + } + + #def __init__(self): + def _get_thermal_val(self, thermal_num): + if thermal_num < self.THERMAL_NUM_1_IDX or thermal_num > self.THERMAL_NUM_MAX: + logging.debug('GET. Parameter error. thermal_num, %d', thermal_num) + return None + + device_path = self.get_thermal_to_device_path(thermal_num) + if(os.path.isfile(device_path)): + for filename in glob.glob(device_path): + try: + val_file = open(filename, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + content = val_file.readline().rstrip() + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + return int(content) + + else: + print "No such device_path=%s"%device_path + return 0 + + def get_num_thermals(self): + return self.THERMAL_NUM_MAX + + def get_idx_thermal_start(self): + return self.THERMAL_NUM_1_IDX + + def get_size_node_map(self): + return len(self._thermal_to_device_node_mapping) + + def get_size_path_map(self): + return len(self.thermal_sysfspath) + + def get_thermal_to_device_path(self, thermal_num): + return self.thermal_sysfspath[thermal_num][0] + + def get_thermal_1_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + + def get_thermal_2_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) + def get_thermal_temp(self): + return (self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) +self._get_thermal_node_val(self.THERMAL_NUM_3_IDX)) + +def main(): + thermal = ThermalUtil() + print "termal1=%d" %thermal._get_thermal_val(1) + print "termal2=%d" %thermal._get_thermal_val(2) + print "termal3=%d" %thermal._get_thermal_val(3) + print "termal4=%d" %thermal._get_thermal_val(4) + print "termal5=%d" %thermal._get_thermal_val(5) +# +# print 'get_size_node_map : %d' % thermal.get_size_node_map() +# print 'get_size_path_map : %d' % thermal.get_size_path_map() +# for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): +# print thermal.get_thermal_to_device_path(x) +# +if __name__ == '__main__': + main() \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/Makefile new file mode 100755 index 00000000000..f845f2e17d8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/Makefile @@ -0,0 +1,19 @@ +ifneq ($(KERNELRELEASE),) +obj-m:= x86-64-accton-as4630-54pe-cpld.o x86-64-accton-as4630-54pe-psu.o \ + x86-64-accton-as4630-54pe-leds.o ym2651y.o + +else +ifeq (,$(KERNEL_SRC)) +#$(error KERNEL_SRC is not defined) +KVERSION=3.16.0-8-amd64 +KERNEL_DIR = /usr/src/linux-headers-$(KVERSION)/ +KERNELDIR:=$(KERNEL_DIR) +else +KERNELDIR:=$(KERNEL_SRC) +endif +PWD:=$(shell pwd) +default: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules +clean: + rm -rf *.o *.mod.o *.mod.o *.mod.c *.ko .*cmd .tmp_versions Module.markers Module.symvers modules.order +endif diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-cpld.c b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-cpld.c new file mode 100755 index 00000000000..5e25e824d41 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-cpld.c @@ -0,0 +1,1105 @@ +/* + * Copyright (C) Jostar yang + * + * This module supports the accton cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Accton as4630_54pe CPLD + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ +#define FAN_DUTY_CYCLE_REG_MASK 0x1F +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 114 // R.P.M value = read value x3.79*60/2 + +#define NUM_THERMAL_SENSORS (3) /* Get sum of this number of sensors.*/ +#define THERMAL_SENSORS_DRIVER "lm75" +#define THERMAL_SENSORS_ADDRS {0x48, 0x4a, 0x4b} + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +enum cpld_type { + as4630_54pe_cpld, +}; +enum fan_id { + FAN1_ID, + FAN2_ID, + FAN3_ID, +}; + +static const u8 fan_reg[] = { + 0x87, /* fan status, fan direction */ + 0x1A, /* fan PWM(for fan1 ,fan2) */ + 0x1B, /* fan PWM(for fan1 ,fan2) */ + 0x88, /* front fan1 speed(rpm) */ + 0x89, /* front fan2 speed(rpm) */ + 0x8A, /* front fan3 speed(rpm) */ + 0x20, /*fan fault*/ +}; + +struct as4630_54pe_cpld_data { + enum cpld_type type; + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_fan_val[ARRAY_SIZE(fan_reg)]; /* Register value */ + int system_temp; /*In unit of mini-Celsius*/ + int sensors_found; +}; + + + +static const struct i2c_device_id as4630_54pe_cpld_id[] = { + { "as4630_54pe_cpld", as4630_54pe_cpld}, + { } +}; +MODULE_DEVICE_TABLE(i2c, as4630_54pe_cpld_id); + +#define TRANSCEIVER_PRESENT_ATTR_ID(index) MODULE_PRESENT_##index +#define TRANSCEIVER_TXDISABLE_ATTR_ID(index) MODULE_TXDISABLE_##index +#define TRANSCEIVER_RXLOS_ATTR_ID(index) MODULE_RXLOS_##index +#define TRANSCEIVER_TXFAULT_ATTR_ID(index) MODULE_TXFAULT_##index +#define FAN_SPEED_RPM_ATTR_ID(index) FAN_SPEED_RPM_##index +#define FAN_DIRECTION_ID(index) FAN_DIRECTION_##index +#define FAN_PRESENT_ATTR_ID(index) FAN_PRESENT_##index +#define FAN_FAULT_ATTR_ID(index) FAN_FAULT_##index + +enum as4630_54pe_cpld_sysfs_attributes { + CPLD_VERSION, + ACCESS, + /* transceiver attributes */ + TRANSCEIVER_RXLOS_ATTR_ID(49), + TRANSCEIVER_RXLOS_ATTR_ID(50), + TRANSCEIVER_RXLOS_ATTR_ID(51), + TRANSCEIVER_RXLOS_ATTR_ID(52), + TRANSCEIVER_TXFAULT_ATTR_ID(49), + TRANSCEIVER_TXFAULT_ATTR_ID(50), + TRANSCEIVER_TXFAULT_ATTR_ID(51), + TRANSCEIVER_TXFAULT_ATTR_ID(52), + TRANSCEIVER_PRESENT_ATTR_ID(49), + TRANSCEIVER_PRESENT_ATTR_ID(50), + TRANSCEIVER_PRESENT_ATTR_ID(51), + TRANSCEIVER_PRESENT_ATTR_ID(52), + TRANSCEIVER_PRESENT_ATTR_ID(53), + TRANSCEIVER_PRESENT_ATTR_ID(54), + TRANSCEIVER_TXDISABLE_ATTR_ID(49), + TRANSCEIVER_TXDISABLE_ATTR_ID(50), + TRANSCEIVER_TXDISABLE_ATTR_ID(51), + TRANSCEIVER_TXDISABLE_ATTR_ID(52), + FAN_PRESENT_ATTR_ID(1), + FAN_PRESENT_ATTR_ID(2), + FAN_PRESENT_ATTR_ID(3), + FAN_SPEED_RPM_ATTR_ID(1), + FAN_SPEED_RPM_ATTR_ID(2), + FAN_SPEED_RPM_ATTR_ID(3), + FAN_DIRECTION_ID(1), + FAN_DIRECTION_ID(2), + FAN_DIRECTION_ID(3), + FAN_FAULT_ATTR_ID(1), + FAN_FAULT_ATTR_ID(2), + FAN_FAULT_ATTR_ID(3), + FAN_DUTY_CYCLE_PERCENTAGE, +}; + +/* sysfs attributes for hwmon + */ +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf); +static int as4630_54pe_cpld_read_internal(struct i2c_client *client, u8 reg); +static int as4630_54pe_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value); + +/*fan sysfs*/ +static struct as4630_54pe_cpld_data *as4630_54pe_fan_update_device(struct device *dev); +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, char *buf); +//static ssize_t show_power(struct device *dev, struct device_attribute *da, + // char *buf); + + + +/* transceiver attributes */ +#define DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IRUGO, show_status, NULL, MODULE_PRESENT_##index); \ + static SENSOR_DEVICE_ATTR(module_tx_disable_##index, S_IRUGO | S_IWUSR, show_status, set_tx_disable, MODULE_TXDISABLE_##index); \ + static SENSOR_DEVICE_ATTR(module_rx_los_##index, S_IRUGO, show_status, NULL, MODULE_RXLOS_##index); \ + static SENSOR_DEVICE_ATTR(module_tx_fault_##index, S_IRUGO, show_status, NULL, MODULE_TXFAULT_##index); + +#define DECLARE_SFP_TRANSCEIVER_ATTR(index) \ + &sensor_dev_attr_module_present_##index.dev_attr.attr, \ + &sensor_dev_attr_module_tx_disable_##index.dev_attr.attr, \ + &sensor_dev_attr_module_rx_los_##index.dev_attr.attr, \ + &sensor_dev_attr_module_tx_fault_##index.dev_attr.attr + +#define DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IRUGO, show_status, NULL, MODULE_PRESENT_##index); + +#define DECLARE_QSFP_TRANSCEIVER_ATTR(index) \ + &sensor_dev_attr_module_present_##index.dev_attr.attr + + +#define DECLARE_FAN_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_present_##index, S_IRUGO, fan_show_value, NULL, FAN_PRESENT_##index); \ + static SENSOR_DEVICE_ATTR(fan_fault_##index, S_IRUGO, fan_show_value, NULL, FAN_FAULT_##index); \ + static SENSOR_DEVICE_ATTR(fan_speed_rpm_##index, S_IRUGO, fan_show_value, NULL, FAN_SPEED_RPM_##index); \ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IRUGO, fan_show_value, NULL, FAN_SPEED_RPM_##index);\ + static SENSOR_DEVICE_ATTR(fan_direction_##index, S_IRUGO, fan_show_value, NULL, FAN_DIRECTION_##index); + +#define DECLARE_FAN_ATTR(index) \ + &sensor_dev_attr_fan_present_##index.dev_attr.attr, \ + &sensor_dev_attr_fan_fault_##index.dev_attr.attr, \ + &sensor_dev_attr_fan_speed_rpm_##index.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_input.dev_attr.attr, \ + &sensor_dev_attr_fan_direction_##index.dev_attr.attr + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE); +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan_duty_cycle_percentage.dev_attr.attr + +#define DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR() \ + static SENSOR_DEVICE_ATTR(sys_temp, S_IRUGO, get_sys_temp, NULL, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_SYSTEM_TEMP_ATTR() &sensor_dev_attr_sys_temp.dev_attr.attr + +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(access, S_IWUSR, NULL, access, ACCESS); + + + +/* transceiver attributes */ +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(49); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(50); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(51); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(52); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(53); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(54); +/* fan attributes */ +DECLARE_FAN_SENSOR_DEV_ATTR(1); +DECLARE_FAN_SENSOR_DEV_ATTR(2); +DECLARE_FAN_SENSOR_DEV_ATTR(3); +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(1); + +static struct attribute *as4630_54pe_cpld_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + DECLARE_SFP_TRANSCEIVER_ATTR(49), + DECLARE_SFP_TRANSCEIVER_ATTR(50), + DECLARE_SFP_TRANSCEIVER_ATTR(51), + DECLARE_SFP_TRANSCEIVER_ATTR(52), + DECLARE_QSFP_TRANSCEIVER_ATTR(53), + DECLARE_QSFP_TRANSCEIVER_ATTR(54), + DECLARE_FAN_ATTR(1), + DECLARE_FAN_ATTR(2), + DECLARE_FAN_ATTR(3), + DECLARE_FAN_DUTY_CYCLE_ATTR(1), + NULL +}; + +static const struct attribute_group as4630_54pe_cpld_group = { + .attrs = as4630_54pe_cpld_attributes, +}; + + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as4630_54pe_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0, revert = 0; + + switch (attr->index) + { + case MODULE_RXLOS_49 ... MODULE_RXLOS_50: + reg=0x5; + mask = 0x1<< (attr->index==MODULE_RXLOS_49?4:0); + break; + case MODULE_TXFAULT_49 ... MODULE_TXFAULT_50: + reg=0x5; + mask=0x1 << (attr->index==MODULE_TXFAULT_49?5:1); + break; + case MODULE_PRESENT_49 ... MODULE_PRESENT_50: + reg=0x5; + mask=0x1 << (attr->index==MODULE_PRESENT_49?6:2); + break; + case MODULE_TXDISABLE_49 ... MODULE_TXDISABLE_50: + reg=0x5; + mask=0x1 << (attr->index==MODULE_TXFAULT_49?7:3); + break; + + case MODULE_RXLOS_51 ... MODULE_RXLOS_52: + reg=0x6; + mask = 0x1<< (attr->index==MODULE_RXLOS_51?4:0); + break; + case MODULE_TXFAULT_51 ... MODULE_TXFAULT_52: + reg=0x6; + mask=0x1 << (attr->index==MODULE_TXFAULT_51?5:1); + break; + case MODULE_PRESENT_51 ... MODULE_PRESENT_52: + reg=0x6; + mask=0x1 << (attr->index==MODULE_PRESENT_51?6:2); + break; + case MODULE_TXDISABLE_51 ... MODULE_TXDISABLE_52: + reg=0x6; + mask=0x1 << (attr->index==MODULE_TXFAULT_51?7:3); + break; + case MODULE_PRESENT_53 ... MODULE_PRESENT_54: + reg=0x21; + mask=0x1 << (attr->index==MODULE_PRESENT_53?0:4); + break; + default: + return 0; + } + + if( attr->index >= MODULE_PRESENT_49 && attr->index <= MODULE_PRESENT_54 ) + { + revert = 1; + } + + mutex_lock(&data->update_lock); + status = as4630_54pe_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", revert ? !(status & mask) : !!(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as4630_54pe_cpld_data *data = i2c_get_clientdata(client); + long disable; + int status; + u8 reg = 0, mask = 0; + + status = kstrtol(buf, 10, &disable); + if (status) { + return status; + } + reg = 0x9; + switch (attr->index) + { + case MODULE_TXDISABLE_49 ... MODULE_TXDISABLE_50: + reg=0x5; + mask=0x1 << (attr->index==MODULE_TXFAULT_49?7:3); + break; + case MODULE_TXDISABLE_51 ... MODULE_TXDISABLE_52: + reg=0x6; + mask=0x1 << (attr->index==MODULE_TXFAULT_51?7:3); + break; + + default: + return 0; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as4630_54pe_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + /* Update tx_disable status */ + if (disable) { + status &= ~mask; + } + else { + status |= mask; + } + status = as4630_54pe_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct as4630_54pe_cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = as4630_54pe_cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static void as4630_54pe_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void as4630_54pe_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static ssize_t show_version(struct device *dev, struct device_attribute *attr, char *buf) +{ + int val = 0; + struct i2c_client *client = to_i2c_client(dev); + + val = i2c_smbus_read_byte_data(client, 0x1); + + if (val < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x1) err %d\n", client->addr, val); + } + + return sprintf(buf, "%d\n", val); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + return ((u32)(reg_val) * 625)/ 100; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + return ((u32)duty_cycle * 100 / 625); +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > FAN_MAX_DUTY_CYCLE) + return -EINVAL; + + as4630_54pe_cpld_write_internal(client, fan_reg[1], duty_cycle_to_reg_val(value)); + as4630_54pe_cpld_write_internal(client, fan_reg[2], duty_cycle_to_reg_val(value)); + return count; +} + +static u8 reg_val_to_direction(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 1 : 0; +} + +static u8 reg_val_to_is_present(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 0 : 1; +} + +static u8 is_fan_fault(struct as4630_54pe_cpld_data *data, enum fan_id id) +{ + u8 ret = 1; + + if(id > FAN3_ID) + return 1; + /* Check if the speed of front or rear fan is ZERO, + */ + if (reg_val_to_speed_rpm(data->reg_fan_val[id+3])) + { + + ret = 0; + } + + return ret; +} + +/* Due to this struct is declared at lm75.c, it cannot be include + * under Sonic environment. I duplicate it from lm75.c. + */ +struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; + u8 resolution; /* In bits, between 9 and 12 */ + u8 resolution_limits; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long sample_time; /* In jiffies */ + s16 temp[3]; /* Register values, + 0 = input + 1 = max + 2 = hyst */ +}; + +/*Copied from lm75.c*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + +/*Get hwmon_dev from i2c_client, set hwmon_dev = NULL is failed.*/ +static struct device * get_hwmon_dev( + struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if(data) + { + if( data->valid == 1 && data->hwmon_dev) + { + return data->hwmon_dev; + } + + } + return NULL; +} + +/* To find hwmon index by opening hwmon under that i2c address. + */ +static int find_hwmon_index_by_FileOpen( + int bus_nr, + unsigned short addr, + int *index) +{ +#define MAX_HWMON_DEVICE (10) /* Find hwmon device in 0~10*/ + struct file *sfd; + char client_name[96]; + int i=0; + + do { + snprintf(client_name, sizeof(client_name), + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + + sfd = filp_open(client_name, O_RDONLY, 0); + i++; + } while( IS_ERR(sfd) && i < MAX_HWMON_DEVICE); + + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", client_name, __LINE__); + return -ENOENT; + } + filp_close(sfd, 0); + *index = i - 1; + return 0; + +#undef MAX_HWMON_DEVICE +} + +static int get_temp_file_path( + int bus_nr, unsigned short addr, + struct device *hwmon_dev + ,char *path, int max_len) +{ + + if(hwmon_dev && strlen(dev_name(hwmon_dev))) + { + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/%s/temp1_input", + bus_nr, addr, dev_name(hwmon_dev)); + } + else + { + int i=0; + if(find_hwmon_index_by_FileOpen( bus_nr, addr, &i)) + { + return -EIO; + } + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + } + + return 0; +} + +/*File read the dev file at user space.*/ +static int read_devfile_temp1_input( + struct device *dev, + int bus_nr, + unsigned short addr, + struct device *hwmon_dev, + int *miniCelsius) +{ + struct file *sfd; + char buffer[96]; + char devfile[96]; + int rc, status; + int rdlen, value; + mm_segment_t old_fs; + + rc = 0; + get_temp_file_path(bus_nr, addr, hwmon_dev, devfile, sizeof(devfile)); + sfd = filp_open(devfile, O_RDONLY, 0); + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", devfile, __LINE__); + return -ENOENT; + } + dev_dbg(dev, "Found device:%s\n",devfile); + + if(!(sfd->f_op) || !(sfd->f_op->read) ) { + pr_err("file %s cann't readable ?\n",devfile); + return -ENOENT; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + rdlen = sfd->f_op->read(sfd, buffer, sizeof(buffer), &sfd->f_pos); + if (rdlen == 0) { + pr_err( "File(%s) empty!\n", devfile); + rc = -EIO; + goto exit; + } + status = sscanf(buffer, "%d", &value); + if (status != 1) { + rc = -EIO; + goto exit; + } + *miniCelsius = value; + dev_dbg(dev,"found sensors: %d @i2c %d-%04x\n", value, bus_nr, addr); + +exit: + set_fs(old_fs); + filp_close(sfd, 0); + return rc; +} + +static u8 is_lm75_data_due(struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if (time_after(jiffies, data->last_updated + data->sample_time)) + { + return 1; + } + return 0; +} +static int get_lm75_temp(struct i2c_client *client, int *miniCelsius) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + *miniCelsius = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + +static bool lm75_addr_mached(unsigned short addr) +{ + int i; + unsigned short addrs[] = THERMAL_SENSORS_ADDRS; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) + { + if( addr == addrs[i]) + return 1; + } + return 0; +} + +static int _find_lm75_device(struct device *dev, void *data) +{ + struct device_driver *driver; + struct as4630_54pe_cpld_data *prv = data; + char *driver_name = THERMAL_SENSORS_DRIVER; + + driver = dev->driver; + if (driver && driver->name && + strcmp(driver->name, driver_name) == 0) + { + struct i2c_client *client; + client = to_i2c_client(dev); + if (client) + { + /*cannot use "struct i2c_adapter *adap = to_i2c_adapter(dev);"*/ + struct i2c_adapter *adap = client->adapter; + int miniCelsius = 0; + + if (! lm75_addr_mached(client->addr)) + { + return 0; + } + + if (!adap) { + return -ENXIO; + } + + /* If the data is not updated, read them from devfile + to drive them updateing data from chip.*/ + if (is_lm75_data_due(client)) + { + struct device *hwmon_dev; + + hwmon_dev = get_hwmon_dev(client); + if(0 == read_devfile_temp1_input(dev, adap->nr, + client->addr, hwmon_dev, &miniCelsius)) + { + prv->system_temp += miniCelsius; + prv->sensors_found++; + } + + } + else + { + get_lm75_temp(client, &miniCelsius); + prv->system_temp += miniCelsius; + prv->sensors_found++; + + } + } + } + return 0; +} + +/*Find all lm75 devices and return sum of temperatures.*/ +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + ssize_t ret = 0; + struct as4630_54pe_cpld_data *data = as4630_54pe_fan_update_device(dev); + + data->system_temp=0; + data->sensors_found=0; + i2c_for_each_dev(data, _find_lm75_device); + if (NUM_THERMAL_SENSORS != data->sensors_found) + { + dev_dbg(dev,"only %d of %d temps are found\n", + data->sensors_found, NUM_THERMAL_SENSORS); + data->system_temp = INT_MAX; + } + ret = sprintf(buf, "%d\n",data->system_temp); + return ret; +} + +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + u32 duty_cycle; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as4630_54pe_cpld_data *data = as4630_54pe_fan_update_device(dev); + ssize_t ret = 0; + + if (data->valid) { + switch (attr->index) + { + case FAN_PRESENT_1: + case FAN_PRESENT_2: + case FAN_PRESENT_3: + ret = sprintf(buf, "%d\n", + reg_val_to_is_present(data->reg_fan_val[0], + attr->index - FAN_PRESENT_1)); + break; + case FAN_DUTY_CYCLE_PERCENTAGE: + duty_cycle = reg_val_to_duty_cycle(data->reg_fan_val[1]); + ret = sprintf(buf, "%u\n", duty_cycle); + break; + case FAN_SPEED_RPM_1: + case FAN_SPEED_RPM_2: + case FAN_SPEED_RPM_3: + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_fan_val[attr->index-FAN_SPEED_RPM_1+3])); + break; + case FAN_FAULT_1: + case FAN_FAULT_2: + case FAN_FAULT_3: + ret = sprintf(buf, "%d\n", is_fan_fault(data, attr->index - FAN_FAULT_1)); + break; + case FAN_DIRECTION_1: + case FAN_DIRECTION_2: + case FAN_DIRECTION_3: + ret = sprintf(buf, "%d\n", + reg_val_to_direction(data->reg_fan_val[0], + attr->index - FAN_DIRECTION_1)); + break; + default: + break; + } + } + + return ret; +} + +static struct as4630_54pe_cpld_data *as4630_54pe_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as4630_54pe_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as4630_54pe_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_fan_val); i++) { + int status = as4630_54pe_cpld_read_internal(client, fan_reg[i]); + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg 0x%x, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_fan_val[i] = status & 0xff; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* +static ssize_t show_power(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as4630_54pe_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0; + + reg=0xc; + mask=0x2; + mutex_lock(&data->update_lock); + status = as4630_54pe_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", !(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} +*/ +/* + * I2C init/probing/exit functions + */ +static int as4630_54pe_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); + struct as4630_54pe_cpld_data *data; + int ret = -ENODEV; +// int status; + const struct attribute_group *group = NULL; + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto exit; + + data = kzalloc(sizeof(struct as4630_54pe_cpld_data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->type = id->driver_data; + + /* Register sysfs hooks */ + switch (data->type) + { + case as4630_54pe_cpld: + group = &as4630_54pe_cpld_group; + break; + default: + break; + } + + if (group) + { + ret = sysfs_create_group(&client->dev.kobj, group); + if (ret) { + goto exit_free; + } + } + + as4630_54pe_cpld_add_client(client); + + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + goto exit_free; + } + + + return 0; + +exit_free: + kfree(data); +exit: + return ret; +} + +static int as4630_54pe_cpld_remove(struct i2c_client *client) +{ + struct as4630_54pe_cpld_data *data = i2c_get_clientdata(client); + const struct attribute_group *group = NULL; + + as4630_54pe_cpld_remove_client(client); + + /* Remove sysfs hooks */ + switch (data->type) + { + case as4630_54pe_cpld: + group = &as4630_54pe_cpld_group; + break; + default: + break; + } + + if (group) { + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, group); + } + + + kfree(data); + + return 0; +} + +static int as4630_54pe_cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int as4630_54pe_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +int as4630_54pe_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as4630_54pe_cpld_read_internal(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as4630_54pe_cpld_read); + +int as4630_54pe_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as4630_54pe_cpld_write_internal(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as4630_54pe_cpld_write); + +static struct i2c_driver as4630_54pe_cpld_driver = { + .driver = { + .name = "as4630_54pe_cpld", + .owner = THIS_MODULE, + }, + .probe = as4630_54pe_cpld_probe, + .remove = as4630_54pe_cpld_remove, + .id_table = as4630_54pe_cpld_id, +}; + +static int __init as4630_54pe_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&as4630_54pe_cpld_driver); +} + +static void __exit as4630_54pe_cpld_exit(void) +{ + i2c_del_driver(&as4630_54pe_cpld_driver); +} + +MODULE_AUTHOR("Jostar Yang "); +MODULE_DESCRIPTION("Accton I2C CPLD driver"); +MODULE_LICENSE("GPL"); + +module_init(as4630_54pe_cpld_init); +module_exit(as4630_54pe_cpld_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-leds.c b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-leds.c new file mode 100755 index 00000000000..34c22fd82aa --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-leds.c @@ -0,0 +1,579 @@ +/* + * A LED driver for the accton_as4630_54pe_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern int as4630_54pe_cpld_read (unsigned short cpld_addr, u8 reg); +extern int as4630_54pe_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +#define DRVNAME "accton_as4630_54pe_led" + +struct accton_as4630_54pe_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[2]; /* only 1 register*/ +}; + +static struct accton_as4630_54pe_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x60) + +#define LED_TYPE_DIAG_REG_MASK (0x20|0x40|0x80) +#define LED_MODE_DIAG_GREEN_VALUE (0x20) +#define LED_MODE_DIAG_GREEN_BLINK_VALUE (0x60) +#define LED_MODE_DIAG_AMBER_VALUE (0x80) /*It's yellow actually. Green+Red=Yellow*/ +#define LED_MODE_DIAG_OFF_VALUE (0x0) + +#define LED_TYPE_PRI_REG_MASK (0x8|0x4) +#define LED_MODE_PRI_GREEN_VALUE 0x4 +#define LED_MODE_PRI_AMBER_VALUE 0x8 +#define LED_MODE_PRI_OFF_VALUE 0x0 + +#define LED_TYPE_POE_REG_MASK (0x2|0x1) +#define LED_MODE_POE_GREEN_VALUE 0x1 +#define LED_MODE_POE_AMBER_VALUE 0x2 +#define LED_MODE_POE_OFF_VALUE 0x0 + +#define LED_TYPE_STK1_REG_MASK 0x20 +#define LED_MODE_STK1_GREEN_VALUE 0x0 +#define LED_MODE_STK1_OFF_VALUE 0x20 + +#define LED_TYPE_STK2_REG_MASK 0x10 +#define LED_MODE_STK2_GREEN_VALUE 0x0 +#define LED_MODE_STK2_OFF_VALUE 0x10 + +#define LED_TYPE_FAN_REG_MASK (0x20|0x10) +#define LED_MODE_FAN_AMBER_VALUE 0x20 +#define LED_MODE_FAN_GREEN_VALUE 0x10 +#define LED_MODE_FAN_OFF_VALUE (0x0) + +#define LED_TYPE_PSU2_REG_MASK (0x8|0x4) +#define LED_MODE_PSU2_AMBER_VALUE 0x8 +#define LED_MODE_PSU2_GREEN_VALUE 0x4 +#define LED_MODE_PSU2_OFF_VALUE (0x0) + +#define LED_TYPE_PSU1_REG_MASK (0x2|0x1) +#define LED_MODE_PSU1_AMBER_VALUE 0x2 +#define LED_MODE_PSU1_GREEN_VALUE 0x1 +#define LED_MODE_PSU1_OFF_VALUE (0x0) + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_PRI, + LED_TYPE_POE, + LED_TYPE_STK1, + LED_TYPE_STK2, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2 +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1<update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting accton_as4630_54pe_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = accton_as4630_54pe_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as4630_54pe_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !accton_getLedReg(type, ®)) + { + dev_dbg(&ledctl->pdev->dev, "Not match item for %d.\n", type); + } + + + reg_val = accton_as4630_54pe_led_read_value(reg); + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + + accton_as4630_54pe_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void accton_as4630_54pe_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness accton_as4630_54pe_led_diag_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void accton_as4630_54pe_led_pri_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_PRI); +} + +static enum led_brightness accton_as4630_54pe_led_pri_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PRI, ledctl->reg_val[0]); +} + +static void accton_as4630_54pe_led_poe_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_POE); +} + +static enum led_brightness accton_as4630_54pe_led_poe_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_POE, ledctl->reg_val[1]); +} + + +static void accton_as4630_54pe_led_stk1_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_STK1); +} + +static enum led_brightness accton_as4630_54pe_led_stk1_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_STK1, ledctl->reg_val[1]); +} + +static void accton_as4630_54pe_led_stk2_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_STK2); +} + +static enum led_brightness accton_as4630_54pe_led_stk2_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_STK2, ledctl->reg_val[1]); +} + +static void accton_as4630_54pe_led_fan_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_FAN); +} + +static enum led_brightness accton_as4630_54pe_led_fan_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_FAN, ledctl->reg_val[0]); +} + +static void accton_as4630_54pe_led_psu1_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_PSU1); +} + +static enum led_brightness accton_as4630_54pe_led_psu1_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU1, ledctl->reg_val[0]); +} + +static void accton_as4630_54pe_led_psu2_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as4630_54pe_led_set(led_cdev, led_light_mode, LED_TYPE_PSU2); +} + +static enum led_brightness accton_as4630_54pe_led_psu2_get(struct led_classdev *cdev) +{ + accton_as4630_54pe_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU2, ledctl->reg_val[0]); +} + +static struct led_classdev accton_as4630_54pe_leds[] = { + [LED_TYPE_DIAG] = { + .name = "diag", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_diag_set, + .brightness_get = accton_as4630_54pe_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_GREEN, + }, + [LED_TYPE_PRI] = { + .name = "pri", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_pri_set, + .brightness_get = accton_as4630_54pe_led_pri_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AMBER, + }, + [LED_TYPE_POE] = { + .name = "poe", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_poe_set, + .brightness_get = accton_as4630_54pe_led_poe_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AMBER, + }, + [LED_TYPE_STK1] = { + .name = "stk1", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_stk1_set, + .brightness_get = accton_as4630_54pe_led_stk1_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_GREEN, + }, + [LED_TYPE_STK2] = { + .name = "stk2", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_stk2_set, + .brightness_get = accton_as4630_54pe_led_stk2_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_GREEN, + }, + [LED_TYPE_FAN] = { + .name = "fan", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_fan_set, + .brightness_get = accton_as4630_54pe_led_fan_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU1] = { + .name = "psu1", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_psu1_set, + .brightness_get = accton_as4630_54pe_led_psu1_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "psu2", + .default_trigger = "unused", + .brightness_set = accton_as4630_54pe_led_psu2_set, + .brightness_get = accton_as4630_54pe_led_psu2_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int accton_as4630_54pe_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as4630_54pe_leds); i++) { + led_classdev_suspend(&accton_as4630_54pe_leds[i]); + } + + return 0; +} + +static int accton_as4630_54pe_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as4630_54pe_leds); i++) { + led_classdev_resume(&accton_as4630_54pe_leds[i]); + } + + return 0; +} + +static int accton_as4630_54pe_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(accton_as4630_54pe_leds); i++) { + ret = led_classdev_register(&pdev->dev, &accton_as4630_54pe_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(accton_as4630_54pe_leds)) { + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&accton_as4630_54pe_leds[i]); + } + } + + return ret; +} + +static int accton_as4630_54pe_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(accton_as4630_54pe_leds); i++) { + led_classdev_unregister(&accton_as4630_54pe_leds[i]); + } + + return 0; +} + +static struct platform_driver accton_as4630_54pe_led_driver = { + .probe = accton_as4630_54pe_led_probe, + .remove = accton_as4630_54pe_led_remove, + .suspend = accton_as4630_54pe_led_suspend, + .resume = accton_as4630_54pe_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as4630_54pe_led_init(void) +{ + int ret; + + ret = platform_driver_register(&accton_as4630_54pe_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct accton_as4630_54pe_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as4630_54pe_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&accton_as4630_54pe_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as4630_54pe_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&accton_as4630_54pe_led_driver); + kfree(ledctl); +} + +module_init(accton_as4630_54pe_led_init); +module_exit(accton_as4630_54pe_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as4630_54pe_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-psu.c b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-psu.c new file mode 100755 index 00000000000..798a5656410 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/x86-64-accton-as4630-54pe-psu.c @@ -0,0 +1,320 @@ +/* + * An hwmon driver for accton as4630_54pe Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_MODEL_NAME 20 +#define MAX_SERIAL_NUMBER 18 + +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_string(struct device *dev, struct device_attribute *da, char *buf); +static int as4630_54pe_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as4630_54pe_cpld_read(unsigned short cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as4630_54pe_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[MAX_MODEL_NAME]; /* Model name, read from eeprom */ + char serial_number[MAX_SERIAL_NUMBER]; +}; + +static struct as4630_54pe_psu_data *as4630_54pe_psu_update_device(struct device *dev); + +enum as4630_54pe_psu_sysfs_attributes { + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD, + PSU_SERIAL_NUMBER +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_string, NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_serial_number, S_IRUGO, show_string, NULL, PSU_SERIAL_NUMBER); + + +static struct attribute *as4630_54pe_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_serial_number.dev_attr.attr, + NULL +}; + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as4630_54pe_psu_data *data = as4630_54pe_psu_update_device(dev); + u8 status = 0; + + //printk("data->status=0x%x, attr->index=%d,data->index=%d \n", data->status, attr->index, data->index); + if (attr->index == PSU_PRESENT) { + if(data->index==0) + status = !( (data->status >> 5) & 0x1); + else + status = !( (data->status >> 1) & 0x1); + } + else { /* PSU_POWER_GOOD */ + if(data->index==0) + status = ( (data->status >> 6) & 0x1); + else + status = ( (data->status >> 2) & 0x1); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_string(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as4630_54pe_psu_data *data = as4630_54pe_psu_update_device(dev); + char *ptr = NULL; + + if (!data->valid) { + return -EIO; + } + + switch (attr->index) { + case PSU_MODEL_NAME: + ptr = data->model_name; + break; + case PSU_SERIAL_NUMBER: + ptr = data->serial_number; + break; + default: + return -EINVAL; + } + + return sprintf(buf, "%s\n", ptr); +} + +static const struct attribute_group as4630_54pe_psu_group = { + .attrs = as4630_54pe_psu_attributes, +}; + +static int as4630_54pe_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as4630_54pe_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as4630_54pe_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as4630_54pe_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as4630_54pe_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as4630_54pe_psu_remove(struct i2c_client *client) +{ + struct as4630_54pe_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as4630_54pe_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as4630_54pe_psu1, + as4630_54pe_psu2 +}; + +static const struct i2c_device_id as4630_54pe_psu_id[] = { + { "as4630_54pe_psu1", as4630_54pe_psu1 }, + { "as4630_54pe_psu2", as4630_54pe_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as4630_54pe_psu_id); + +static struct i2c_driver as4630_54pe_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as4630_54pe_psu", + }, + .probe = as4630_54pe_psu_probe, + .remove = as4630_54pe_psu_remove, + .id_table = as4630_54pe_psu_id, + .address_list = normal_i2c, +}; + +static int as4630_54pe_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = 0; + int retry_count = 5; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) { + msleep(10); + continue; + } + + if (unlikely(result != data_len)) { + result = -EIO; + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +static struct as4630_54pe_psu_data *as4630_54pe_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as4630_54pe_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status; + int power_good = 0; + + dev_dbg(&client->dev, "Starting as4630_54pe update\n"); + + /* Read psu status */ + status = as4630_54pe_cpld_read(0x60, 0x22); + //printk("status=0x%x in %s\n", status, __FUNCTION__); + if (status < 0) { + dev_dbg(&client->dev, "cpld reg 0x60 err %d\n", status); + } + else { + data->status = status; + } + + /* Read model name */ + memset(data->model_name, 0, sizeof(data->model_name)); + memset(data->serial_number, 0, sizeof(data->serial_number)); + power_good = (data->status >> (3-data->index) & 0x1); + + if (power_good) { + status = as4630_54pe_psu_read_block(client, 0x20, data->model_name, + ARRAY_SIZE(data->model_name)-1); + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x)\n", client->addr); + printk("unable to read model name from (0x%x)\n", client->addr); + } + else { + data->model_name[ARRAY_SIZE(data->model_name)-1] = '\0'; + + } + /* Read from offset 0x2e ~ 0x3d (16 bytes) */ + status = as4630_54pe_psu_read_block(client, 0x35,data->serial_number, MAX_SERIAL_NUMBER); + if (status < 0) + { + data->serial_number[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x) offset(0x2e)\n", client->addr); + printk("unable to read model name from (0x%x) offset(0x2e)\n", client->addr); + } + data->serial_number[MAX_SERIAL_NUMBER-1]='\0'; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(as4630_54pe_psu_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as4630_54pe_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/ym2651y.c new file mode 120000 index 00000000000..f4d67640ccc --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/modules/ym2651y.c @@ -0,0 +1 @@ +../../common/modules/ym2651y.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor-fan.service b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor-fan.service new file mode 100755 index 00000000000..9f562d2a05e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor-fan.service @@ -0,0 +1,16 @@ +[Unit] +Description=Accton AS4630-54PE Platform Monitoring FAN service +Before=pmon.service +After=as4630-54pe-platform-monitor.service +DefaultDependencies=no + +[Service] +ExecStart=/usr/local/bin/accton_as4630_54pe_monitor_fan.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor-psu.service b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor-psu.service new file mode 100755 index 00000000000..28d6013aa19 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor-psu.service @@ -0,0 +1,16 @@ +[Unit] +Description=Accton AS4630-54PE Platform Monitoring PSU service +Before=pmon.service +After=as4630-54pe-platform-monitor.service +DefaultDependencies=no + +[Service] +ExecStart=/usr/local/bin/accton_as4630_54pe_monitor_psu.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor.service b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor.service new file mode 100755 index 00000000000..47bf4e81d82 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/service/as4630-54pe-platform-monitor.service @@ -0,0 +1,18 @@ +[Unit] +Description=Accton AS4630-54PE Platform Monitoring service +Before=pmon.service +After=sysinit.target +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/local/bin/accton_as4630_54pe_util.py install +ExecStart=/usr/local/bin/accton_as4630_54pe_monitor.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL +#StandardOutput=tty + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/setup.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/setup.py new file mode 100755 index 00000000000..34e6bb59de5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env python + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as4630_54pe', + version='1.0', + description='Module to initialize Accton AS4630-54PE platforms', + + packages=['as4630_54pe'], + package_dir={'as4630_54pe': 'as4630-54pe/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/README b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/README new file mode 100755 index 00000000000..44e03cab5f5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/README @@ -0,0 +1,117 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +Contents of this package: + patch - files under patch/ is for kernel and ONIE installer + for the kernel: + config-accton-as5712_54x.patch + for kernel configuration. + driver-i2c-muxes-pca954x-always-deselect.patch + for i2c_mux deselects after transaction. + driver-patches-for-accton-as5712-fan-psu-cpld.patch + for as5712's fan/psu/cpld/led/sfp drivers. + for ONIE: + onie_installer-accton-AS5712-54X.patch + for console port setting and copy util script o rootfs. + module - Contains source code of as5712 kernel driver modules. + +The late Sonic building scripts, pushed @Dec 5 2016, will automatically +create a docker container and run building process under it. +User is not necessary to handle docker environment creation. + +1. Download sonic-buildimage environment. + - Run "git clone https://github.com/Azure/sonic-buildimage". + - cd to sonic-buildimage and run "git submodule update --init --recursive". +2. Build kernel + - cd ./src/sonic-linux-kernel + - Copy patches and series from patch/kernel of this release to + sonic-linux-kernel/patch. + - Build kernel by "make". + - The built kernel package, linux-image-3.16.0-5-amd64_3.16.51-3+deb8u1_amd64.deb + , is generated. +3. Build installer + - Change directory back to sonic-buildimage/. + - Get onie_installer-accton-AS5712-54X.patch" from patch/installer. + - Change setting for AS5712-54X by patching build_image.sh. + "patch -p1 < onie_installer-accton-AS5712-54X.patch" + !!NOTICE, patching onie_installer-accton-AS5712-54X.patch comments out the + "git status" checking at build_image.sh. + - The account and password of installed OS can be given at rules/config. + The default user and password are "admin" & "YourPaSsWoRd" respectively. + - Run "make configure PLATFORM=broadcom" + - Copy the built kernel debian package to target/debs/. + The file is linux-image-3.16.0-5-amd64_*_amd64.deb under directory + src/sonic-linux-kernel/. + - Run "make target/sonic-generic.bin" + - Get the installer, target/sonic-generic.bin, to target machine and install. + +All Linux kernel code is licensed under the GPLv1. All other code is +licensed under the GPLv3. Please see the LICENSE file for copies of +both licenses. + +The code for integacting with Accton AS5712-54X has 2 parts, +kernel drivers and operational script. +The kernel drivers of peripherals are under module/ directory. +1. These drivers are patched into kernel by + driver-patches-for-accton-as5712-fan-psu-cpld.patch + Or you can build the driver under module/ by setting environment variable, + KERNEL_SRC, to proper linux built directory and run make. + It may be sonic-linux-kernel/linux-3.*/debian/build/build_amd64_none_amd64/. +2. A operational script, accton_as5712_util.py, for device initializatian and + peripheral accessing should be installed at /usr/bin. + This script is generated by onie_installer-accton-AS5712-54X.patch. + It's done by patching onie_installer-accton-AS5712-54X.patch at build-image. + Run "accton_as5712_util.py install" to install drivers. + +To initialize the system, run "accton_as5712_util.py install". +To clean up the drivers & devices, run "accton_as5712_util.py clean". +To dump information of sensors, run "accton_as5712_util.py show". +To dump SFP EEPROM, run "accton_as5712_util.py sff". +To set fan speed, run "accton_as5712_util.py set fan". +To enable/disable SFP emission, run "accton_as5712_util.py set sfp". +To set system LEDs' color, run "accton_as5712_util.py set led" +For more information, run "accton_as5712_util.py --help". + +==================================================================== +Besides applying accton_as5712_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +System LED: + There are 5 system LEDs at the lower-left corner of front panel. + They are loc, diag, fan, ps1, and ps2. + The sysfs interface color mappings are as follows: + Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + But not all colors are available for each LED. + +Fan Control: + There are 10 fans inside 5 fan modules. + All fans share 1 duty setting, ranged from 0~100. + +Thermal sensers: + 3 temperature sensors are controlled by the lm75 kernel modules. + +PSUs: + There 2 power supplies slot at the left/right side of the back. + Once if a PSU is not plugged, the status of it is shown failed. + +There are 48 SFP+ and 6 QSFP modules are equipped. +Before operating on PSU and QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor.py new file mode 100755 index 00000000000..eca1eac6b21 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor.py @@ -0,0 +1,345 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.)# +# 4/20/2018: Jostar modify for as7726_32x +# 12/03/2018:Jostar modify for as7726_32x thermal plan +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import logging.handlers + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate + from as7726_32x.fanutil import FanUtil + from as7726_32x.thermalutil import ThermalUtil +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = '/usr/local/bin/accton_as4630_54pe_monitor' + +global log_file +global log_level + + +# Air Flow Front to Back : +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 <=38C : Keep 37.5%(0x04) Fan speed +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 38C : Change Fan speed from 37.5%(0x04) to 62.5%(0x08) +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 46C : Change Fan speed from 62.5%(0x08) to 100%(0x0E) +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 58C : Send alarm message +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 66C : Shut down system +# One Fan fail : Change Fan speed to 100%(0x0E) + + +# Air Flow Back to Front : +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 <=34C : Keep 37.5%(0x04) Fan speed +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 34C : Change Fan speed from 37.5%(0x04) to 62.5%(0x08) +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 44C : Change Fan speed from 62.5%(0x08) to 100%(0x0E) +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 59C : Send alarm message +# (Thermal sensor_LM75_4A + Thermal sensor_LM75_CPU) /2 > 67C : Shut down system +# One Fan fail: Change Fan speed to 100%(0x0E) +# sensor_LM75_CPU == sensor_LM75_4B + + +class switch(object): + def __init__(self, value): + self.value = value + self.fall = False + + def __iter__(self): + """Return the match method once, then stop""" + yield self.match + raise StopIteration + + def match(self, *args): + """Indicate whether or not to enter a case suite""" + if self.fall or not args: + return True + elif self.value in args: # changed for v1.5, see below + self.fall = True + return True + else: + return False + + +fan_policy_state=1 +fan_fail=0 +alarm_state = 0 #0->default or clear, 1-->alarm detect +test_temp = 0 +test_temp_list = [0, 0, 0, 0, 0, 0] +temp_test_data=0 +# Make a class we can use to capture stdout and sterr in the log +class device_monitor(object): + # static temp var + temp = 0 + new_pwm = 0 + pwm=0 + ori_pwm = 0 + default_pwm=0x4 + + def __init__(self, log_file, log_level): + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + sys_handler = handler = logging.handlers.SysLogHandler(address = '/dev/log') + sys_handler.setLevel(logging.WARNING) + logging.getLogger('').addHandler(sys_handler) + + #logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def get_state_from_fan_policy(self, temp, policy): + state=0 + + logging.debug('temp=%d', temp) + for i in range(0, len(policy)): + #logging.debug('policy[%d][0]=%d, policy[%d][1]=%d, policy[%d][2]=%d', i,policy[i][0],i, policy[i][1], i, policy[i][2]) + if temp > policy[i][2]: + if temp <= policy[i][3]: + state =i + logging.debug ('temp=%d >= policy[%d][2]=%d, temp=%d < policy[%d][3]=%d' , temp, i, policy[i][2], temp, i, policy[i][3]) + logging.debug ('fan_state=%d', state) + break + + return state + + + def manage_fans(self): + + global fan_policy_state + global fan_fail + global test_temp + global test_temp_list + global alarm_state + global temp_test_data + + LEVEL_FAN_DEF=0 + LEVEL_FAN_MID=1 + LEVEL_FAN_MAX=2 + LEVEL_TEMP_HIGH=3 + LEVEL_TEMP_CRITICAL=4 + + + fan_policy_f2b = { + LEVEL_FAN_DEF: [38, 0x4, 0, 38000], + LEVEL_FAN_MID: [63, 0x6, 38000, 46000], + LEVEL_FAN_MAX: [100, 0xE, 46000, 58000], + LEVEL_TEMP_HIGH: [100, 0xE, 58000, 66000], + LEVEL_TEMP_CRITICAL: [100, 0xE, 58000, 200000], + } + fan_policy_b2f = { + LEVEL_FAN_DEF: [38, 0x4, 0, 34000], + LEVEL_FAN_MID: [63, 0x8, 34000, 44000], + LEVEL_FAN_MAX: [100, 0xE, 44000, 59000], + LEVEL_TEMP_HIGH: [100, 0xE, 59000, 67000], + LEVEL_TEMP_CRITICAL: [100, 0xE, 59000, 200000], + } + + fan_policy = fan_policy_f2b + + thermal = ThermalUtil() + fan = FanUtil() + fan_dir=fan.get_fan_dir(1) + if fan_dir == 1: + fan_dri=1 #something wrong, set fan_dir to default val + else: + fan_policy = fan_policy_b2f + + ori_pwm=fan.get_fan_duty_cycle() + new_pwm=0 + logging.debug('fan_dir=%d, ori_pwm=%d', fan_dir, ori_pwm) + logging.debug('test_temp=%d', test_temp) + if test_temp==0: + temp1 = thermal._get_thermal_val(1) + temp2 = thermal._get_thermal_val(2) + temp3 = thermal._get_thermal_val(3) + temp4 = thermal._get_thermal_val(4) + temp5 = thermal._get_thermal_val(5) + else: + temp1 = test_temp_list[0] + temp2 = test_temp_list[1] + temp3 = test_temp_list[2] + temp4 = test_temp_list[3] + temp5 = test_temp_list[4] + fan_fail=0 + + if temp3==0: + temp_get=50000 # if one detect sensor is fail or zero, assign temp=50000, let fan to 75% + logging.debug('lm75_49 detect fail, so set temp_get=50000, let fan to 75%') + elif temp4==0: + temp_get=50000 # if one detect sensor is fail or zero, assign temp=50000, let fan to 75% + logging.debug('lm75_4b detect fail, so set temp_get=50000, let fan to 75%') + else: + temp_get= (temp3 + temp4)/2 # Use (sensor_LM75_4a + sensor_LM75_4b) /2 + ori_state=fan_policy_state + + #temp_test_data=temp_test_data+1000 + #temp_get = temp_get + temp_test_data + #print "Unit test:temp_get=%d"%temp_get + + fan_policy_state=self.get_state_from_fan_policy(temp_get, fan_policy) + #print "temp3=%d"%temp3 + #print "temp4=%d"%temp4 + #print "temp_get=%d"%temp_get + + logging.debug('lm75_48=%d, lm75_49=%d, lm75_4a=%d, lm_4b=%d, lm_4b=%d', temp1,temp2,temp3,temp4,temp5) + logging.debug('ori_state=%d, fan_policy_state=%d', ori_state, fan_policy_state) + new_pwm = fan_policy[fan_policy_state][0] + if fan_fail==0: + logging.debug('new_fan_cycle=%d', new_pwm) + + if fan_fail==0: + if new_pwm!=ori_pwm: + fan.set_fan_duty_cycle(new_pwm) + logging.info('Set fan speed from %d to %d', ori_pwm, new_pwm) + + #Check Fan status + for i in range (fan.FAN_NUM_1_IDX, fan.FAN_NUM_ON_MAIN_BROAD+1): + if fan.get_fan_status(i)==0: + new_pwm=100 + logging.debug('fan_%d fail, set pwm to 100',i) + if test_temp==0: + fan_fail=1 + fan.set_fan_duty_cycle(new_pwm) + break + else: + fan_fail=0 + + #if fan_policy_state == ori_state: + # return True + #else: + new_state = fan_policy_state + + #logging.warning('Temperature high alarm testing') + if ori_state==LEVEL_FAN_DEF: + if new_state==LEVEL_TEMP_HIGH: + if alarm_state==0: + logging.warning('Alarm for temperature high is detected') + alarm_state=1 + if new_state==LEVEL_TEMP_CRITICAL: + logging.critical('Alarm for temperature critical is detected, reboot DUT') + time.sleep(2) + os.system('reboot') + if ori_state==LEVEL_FAN_MID: + if new_state==LEVEL_TEMP_HIGH: + if alarm_state==0: + logging.warning('Alarm for temperature high is detected') + alarm_state=1 + if new_state==LEVEL_TEMP_CRITICAL: + logging.critical('Alarm for temperature critical is detected') + time.sleep(2) + os.system('reboot') + if ori_state==LEVEL_FAN_MAX: + if new_state==LEVEL_TEMP_HIGH: + if alarm_state==0: + logging.warning('Alarm for temperature high is detected') + alarm_state=1 + if new_state==LEVEL_TEMP_CRITICAL: + logging.critical('Alarm for temperature critical is detected') + time.sleep(2) + os.system('reboot') + if alarm_state==1: + if temp_get < (fan_policy[3][0] - 5000): #below 65 C, clear alarm + logging.warning('Alarm for temperature high is cleared') + alarm_state=0 + if ori_state==LEVEL_TEMP_HIGH: + if new_state==LEVEL_TEMP_CRITICAL: + logging.critical('Alarm for temperature critical is detected') + time.sleep(2) + os.system('reboot') + if new_state <= LEVEL_FAN_MID: + logging.warning('Alarm for temperature high is cleared') + alarm_state=0 + if new_state <= LEVEL_FAN_MAX: + if temp_get < (fan_policy[3][0] - 5000): #below 65 C, clear alarm + logging.warning('Alarm for temperature high is cleared') + alarm_state=0 + if ori_state==LEVEL_TEMP_CRITICAL: + if new_state <= LEVEL_FAN_MAX: + logging.warning('Alarm for temperature critical is cleared') + + return True + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + global test_temp + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdlt:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + + if sys.argv[1]== '-t': + if len(sys.argv)!=7: + print "temp test, need input six temp" + return 0 + + i=0 + for x in range(2, 7): + test_temp_list[i]= int(sys.argv[x])*1000 + i=i+1 + test_temp = 1 + log_level = logging.DEBUG + print test_temp_list + + fan = FanUtil() + fan.set_fan_duty_cycle(38) + print "set default fan speed to 37.5%" + monitor = device_monitor(log_file, log_level) + # Loop forever, doing something useful hopefully: + while True: + #monitor.manage_fans() + time.sleep(5) + +if __name__ == '__main__': + main(sys.argv[1:]) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor_fan.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor_fan.py new file mode 100755 index 00000000000..11453818b04 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor_fan.py @@ -0,0 +1,191 @@ +#!/usr/bin/env python +# +# Copyright (C) 2018 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 5/15/2019: Jostar create for as4630-54pe +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import logging.handlers + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate + +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = '/usr/local/bin/accton_as4630_54pe_monitor_fan' + +global log_file +global log_level + + +class switch(object): + def __init__(self, value): + self.value = value + self.fall = False + + def __iter__(self): + """Return the match method once, then stop""" + yield self.match + raise StopIteration + + def match(self, *args): + """Indicate whether or not to enter a case suite""" + if self.fall or not args: + return True + elif self.value in args: # changed for v1.5, see below + self.fall = True + return True + else: + return False + + +fan_state=[2, 2, 2, 2] #init state=2, insert=1, remove=0 +fan_status_state=[2, 2, 2, 2] #init state=2, fault=1, normal=0 +# Make a class we can use to capture stdout and sterr in the log +class device_monitor(object): + + def __init__(self, log_file, log_level): + + self.fan_num = 3 + self.fan_path = "/sys/bus/i2c/devices/3-0060/" + self.present = { + 0: "fan_present_1", + 1: "fan_present_2", + 2: "fan_present_3", + } + + self.fault = { + 0: "fan_fault_1", + 1: "fan_fault_2", + 2: "fan_fault_3", + } + + + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(logging.DEBUG) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + sys_handler = logging.handlers.SysLogHandler(address = '/dev/log') + #sys_handler.setLevel(logging.WARNING) + sys_handler.setLevel(logging.INFO) + logging.getLogger('').addHandler(sys_handler) + + + #logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_fan(self): + + FAN_STATE_REMOVE = 0 + FAN_STATE_INSERT = 1 + + FAN_STATUS_FAULT = 1 + FAN_STATUS_NORMAL = 0 + + global fan_state + global fan_status_state + + for idx in range (0, self.fan_num): + node = self.fan_path + self.present[idx] + try: + val_file = open(node) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + content = val_file.readline().rstrip() + val_file.close() + # content is a string, either "0" or "1" + if content == "1": + if fan_state[idx]!=1: + fan_state[idx]=FAN_STATE_INSERT + logging.info("FAN-%d present is detected", idx+1); + else: + if fan_state[idx]!=0: + fan_state[idx]=FAN_STATE_REMOVE + logging.warning("Alarm for FAN-%d absent is detected", idx+1) + + for idx in range (0, self.fan_num): + node = self.fan_path + self.fault[idx] + try: + val_file = open(node) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + content = val_file.readline().rstrip() + val_file.close() + # content is a string, either "0" or "1" + if content == "1": + if fan_status_state[idx]!=FAN_STATUS_FAULT: + if fan_state[idx] == FAN_STATE_INSERT: + logging.warning("Alarm for FAN-%d failed is detected", idx+1); + fan_status_state[idx]=FAN_STATUS_FAULT + else: + fan_status_state[idx]=FAN_STATUS_NORMAL + + return True + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + monitor = device_monitor(log_file, log_level) + while True: + monitor.manage_fan() + time.sleep(3) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor_psu.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor_psu.py new file mode 100755 index 00000000000..8ef700f33ca --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_monitor_psu.py @@ -0,0 +1,169 @@ +#!/usr/bin/env python +# +# Copyright (C) 2018 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 5/15/2019: Jostar create for as4630-54pe +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import logging.handlers + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = '/usr/local/bin/accton_as4630_54pe_monitor_psu' + +global log_file +global log_level + + +psu_state=[2, 2] +psu_status_state=[2, 2] +# Make a class we can use to capture stdout and sterr in the log +class device_monitor(object): + + def __init__(self, log_file, log_level): + + self.psu_num = 2 + self.psu_path = "/sys/bus/i2c/devices/" + self.presence = "/psu_present" + self.oper_status = "/psu_power_good" + self.mapping = { + 0: "10-0050", + 1: "11-0051", + } + + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + # set up logging to console + + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + sys_handler = logging.handlers.SysLogHandler(address = '/dev/log') + #sys_handler.setLevel(logging.WARNING) + sys_handler.setLevel(logging.INFO) + logging.getLogger('').addHandler(sys_handler) + + #logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_psu(self): + + PSU_STATE_REMOVE = 0 + PSU_STATE_INSERT = 1 + + PSU_STATUS_NO_POWER = 0 + PSU_STATUS_POWER_GOOD = 1 + PSU_STATUS_IDLE =2 + + global psu_state + + for idx in range (0, self.psu_num): + node = self.psu_path + self.mapping[idx] + self.presence + try: + val_file = open(node) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + content = val_file.readline().rstrip() + val_file.close() + # content is a string, either "0" or "1" + if content == "1": + if psu_state[idx]!=1: + psu_state[idx]=PSU_STATE_INSERT + logging.info("PSU-%d present is detected", idx+1); + #psu_status_state[idx]=PSU_STATUS_POWER_GOOD #when insert, assume power is good. If no_power, next code will find it. + else: + if psu_state[idx]!=0: + psu_state[idx]=PSU_STATE_REMOVE + logging.warning("Alarm for PSU-%d absent is detected", idx+1); + psu_status_state[idx]=PSU_STATUS_IDLE + + for idx in range (0, self.psu_num): + node = self.psu_path + self.mapping[idx] + self.oper_status + try: + val_file = open(node) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + content = val_file.readline().rstrip() + val_file.close() + # content is a string, either "0" or "1" + if content == "0": + if psu_status_state[idx]!=PSU_STATUS_NO_POWER: + if psu_state[idx]==PSU_STATE_INSERT: + logging.warning("Alarm for PSU-%d failed is detected", idx+1); + psu_status_state[idx]=PSU_STATUS_NO_POWER + else: + if psu_state[idx]==PSU_STATE_INSERT: + if psu_status_state[idx]!=PSU_STATUS_POWER_GOOD: + logging.info("PSU-%d power_good is detected", idx+1); + psu_status_state[idx]=PSU_STATUS_POWER_GOOD + + + return True + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + monitor = device_monitor(log_file, log_level) + # Loop forever, doing something useful hopefully: + while True: + monitor.manage_psu() + time.sleep(3) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_util.py b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_util.py new file mode 100755 index 00000000000..2f73726f846 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as4630-54pe/utils/accton_as4630_54pe_util.py @@ -0,0 +1,563 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + +PROJECT_NAME = 'as4630_54pe' +version = '0.0.1' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan1':1, 'fan2':1,'fan3':1,'fan4':1,'fan5':1,'thermal':3, 'psu':2, 'sfp':54} + + +led_prefix ='/sys/devices/platform/as4630_54pe_led/leds/accton_'+PROJECT_NAME+'_led::' +fan_prefix ='/sys/devices/platform/as4630_54pe_' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2'], + 'fan1': ['fan'], + 'fan2': ['fan'], + 'fan3': ['fan'], + 'fan4': ['fan'], + 'fan5': ['fan'], + 'fan5': ['fan'], + } +hwmon_nodes = {'led': ['brightness'] , + 'fan1': ['fan_duty_cycle_percentage', 'fan1_fault', 'fan1_speed_rpm', 'fan1_direction', 'fanr1_fault', 'fanr1_speed_rpm'], + 'fan2': ['fan_duty_cycle_percentage','fan2_fault', 'fan2_speed_rpm', 'fan2_direction', 'fanr2_fault', 'fanr2_speed_rpm'], + 'fan3': ['fan_duty_cycle_percentage','fan3_fault', 'fan3_speed_rpm', 'fan3_direction', 'fanr3_fault', 'fanr3_speed_rpm'], + 'fan4': ['fan4_duty_cycle_percentage','fan4_fault', 'fan4_speed_rpm', 'fan4_direction', 'fanr4_fault', 'fanr4_speed_rpm'], + 'fan5': ['fan_duty_cycle_percentage','fan5_fault', 'fan5_speed_rpm', 'fan5_direction', 'fanr5_fault', 'fanr5_speed_rpm'], + } +hwmon_prefix ={'led': led_prefix, + 'fan1': fan_prefix, + 'fan2': fan_prefix, + 'fan3': fan_prefix, + 'fan4': fan_prefix, + 'fan5': fan_prefix, + } + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'fan': ['54-0066'], + 'thermal': ['54-004c', '55-0048','55-0049', '55-004a', '55-004b'] , + 'psu': ['49-0050','50-0053'], + 'sfp': ['-0050']} +i2c_nodes = {'fan': ['present', 'front_speed_rpm', 'rear_speed_rpm'], + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['module_present_ ', 'module_tx_disable_']} + +sfp_map = [18, 19, 20, 21, 22, 23] + +mknod =[ +'echo pca9548 0x77 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-3/new_device', + +'echo as4630_54pe_cpld 0x60 > /sys/bus/i2c/devices/i2c-3/new_device', + +'echo lm77 0x48 > /sys/bus/i2c/devices/i2c-14/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-25/new_device', +'echo lm75 0x4b > /sys/bus/i2c/devices/i2c-24/new_device', + + +# PSU-1 +'echo as4630_54pe_psu1 0x50 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo ype1200am 0x58 > /sys/bus/i2c/devices/i2c-10/new_device', + +# PSU-2 +'echo as4630_54pe_psu2 0x51> /sys/bus/i2c/devices/i2c-11/new_device', +'echo ype1200am 0x59 > /sys/bus/i2c/devices/i2c-11/new_device', + +#EERPOM +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', +] + + + +FORCE = 0 +logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + print "TEST" + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-32 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-32 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ACCTON DBG]: "+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status = 1 + output = "" + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log ("cmd:" + cmd) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_inserted(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + +#'modprobe cpr_4011_4mxx', + +kos = [ +'depmod -ae', +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x force_deselect_on_exit=1', +'modprobe ym2651y', +'modprobe x86_64_accton_as4630_54pe_cpld', +'modprobe x86_64_accton_as4630_54pe_leds', +'modprobe x86_64_accton_as4630_54pe_psu', +'modprobe optoe'] + +def driver_install(): + global FORCE + + ret=log_os_system("lsmod|grep i2c_ismt",1) + my_log("rmmond i2cismt") + log_os_system("rmmod i2c_ismt", 1) + log_os_system("rmmod i2c_i801", 1) + log_os_system("modprobe i2c-i801", 1) + time.sleep(1) + log_os_system("modprobe i2c-ismt", 1) + + + + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + lst = rm.split(" ") + print "lst=%s"%lst + if len(lst) > 3: + del(lst[3]) + rm = " ".join(lst) + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + +def device_install(): + global FORCE + + for i in range(0,len(mknod)): + #for pca954x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(2) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + print("Check SFP") + for i in range(0,len(sfp_map)): + if(i < 4): + opt='optoe2' + else: + opt='optoe1' + status, output =log_os_system("echo " + str(opt) + " 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + + status, output =log_os_system("echo port"+str(i+49) + " > /sys/bus/i2c/devices/"+str(sfp_map[i])+"-0050/port_name", 1) + if status: + print output + if FORCE == 0: + return status + + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/0-0070", 0) + if status==0: + I2C_ORDER=1 + else: + I2C_ORDER=0 + + for i in range(0,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + nodelist = mknod + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_inserted() == False: + return False + if not device_exist(): + print "not device_exist()" + return False + return True + +def do_install(): + if driver_inserted() == False: + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_inserted()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + print "node=%s"%node + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan1'] ['fan11'][0] + node = node.replace(node.split("/")[-1], 'fan1_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0077", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c old mode 100644 new mode 100755 index 47e6a1d06bc..dd4f6dd8c4d --- a/platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c +++ b/platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c @@ -42,6 +42,7 @@ enum chips { YM2651, YM2401, YM2851, + YPEB1200AM }; /* Each client has this additional data @@ -438,6 +439,7 @@ static const struct i2c_device_id ym2651y_id[] = { { "ym2651", YM2651 }, { "ym2401", YM2401 }, { "ym2851", YM2851 }, + { "ype1200am", YPEB1200AM }, {} }; MODULE_DEVICE_TABLE(i2c, ym2651y_id); diff --git a/platform/broadcom/sonic-platform-modules-accton/debian/control b/platform/broadcom/sonic-platform-modules-accton/debian/control index 731c4545689..6d65d1ecdc5 100755 --- a/platform/broadcom/sonic-platform-modules-accton/debian/control +++ b/platform/broadcom/sonic-platform-modules-accton/debian/control @@ -41,6 +41,10 @@ Package: sonic-platform-accton-as7726-32x Architecture: amd64 Description: kernel modules for platform devices such as fan, led, sfp +Package: sonic-platform-accton-as4630-54pe +Architecture: amd64 +Description: kernel modules for platform devices such as fan, led, sfp + Package: sonic-platform-accton-minipack Architecture: amd64 Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/broadcom/sonic-platform-modules-accton/debian/rules b/platform/broadcom/sonic-platform-modules-accton/debian/rules index ef761c01aac..33168702bd5 100755 --- a/platform/broadcom/sonic-platform-modules-accton/debian/rules +++ b/platform/broadcom/sonic-platform-modules-accton/debian/rules @@ -19,7 +19,7 @@ PACKAGE_PRE_NAME := sonic-platform-accton KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= as7712-32x as5712-54x as7816-64x as7716-32x as7716-32xb as7312-54x as7326-56x as6712-32x as7726-32x minipack +MODULE_DIRS:= as7712-32x as5712-54x as7816-64x as7716-32x as7716-32xb as7312-54x as7326-56x as6712-32x as7726-32x as4630-54pe minipack MODULE_DIR := modules UTILS_DIR := utils SERVICE_DIR := service