diff --git a/doc/voq/fabric.md b/doc/voq/fabric.md
index 01270147224..22dddf56e8c 100644
--- a/doc/voq/fabric.md
+++ b/doc/voq/fabric.md
@@ -34,6 +34,7 @@
 | 3.1 | Mar-30 2023 | Jie Feng (Arista Networks) | Update Overview, SAI API and Configuration and management section |
 | 3.2 | May-01 2023 | Jie Feng (Arista Networks) | Update Counter tables information |
 | 3.3 | Oct-31 2023 | Jie Feng (Arista Networks) | Update clear fabric counter commands |
+| 3.4 | May-05 2024 | Jie Feng (Arista Networks) | Update CLI |
 
 # Scope
 
@@ -250,9 +251,27 @@ The above command sets the number of consecutive polls in which no error is dete
 > config fabric port unisolate [port_id]
 ```
 
-Besides the fabric link monitoring algorithm, the above two commands are added. The commands can be used to manually isolate and unisolate a fabric link ( i.e. take the link out of service and put the link back into service ). The two commands can help us debug on the system as well as force isolate a fabric link.
+
+```
+> config fabric port unisolate [port_id] --force
+```
+
+Besides the fabric link monitoring algorithm, the above two commands are added. The commands can be used to manually isolate and unisolate a fabric link ( i.e. take the link out of service and put the link back into service ). The two commands can help us debug on the system as well as a force option to unisolate a fabric link.
 
 
+An additional show command is also added to show the fabric link isolation status of a system.
+
+```
+> show fabric isolation
+asic0
+  Local Link    Auto Isolated    Manual Isolated    Isolated
+------------  ---------------  -----------------  ----------
+           0                0                  1           1
+           1                0                  0           0
+           2                1                  0           1
+....
+```
+
 ### 2.8.2 Monitor Fabric Capacity
 
 When the fabric link monitoring feature is enabled, fabric links may not be operational in a system due to link down, or link isolation by the monitoring algorithm. As a result, the effective capacity of total fabric links may be less than required bandwidth, and lead to performance degradation. Implementing a capacity monitoring algorithm in Orchagent will be useful to alert capacity changes. This feature is for forwarding ASICs on Linecards.
@@ -260,7 +279,7 @@ When the fabric link monitoring feature is enabled, fabric links may not be oper
 #### 2.8.2.1 Cli command
 
 ```
-> config fabric monitor capacity threshold <50-100>
+> config fabric monitor capacity threshold <5-100>
 ```
 The above command is used to configure a capacity threshold to trigger alerts when total fabric link capacity goes below it.
 
@@ -291,15 +310,14 @@ Monitoring traffic on fabric links is another important tool to diagnose fabric
 The following proposed CLI is used to show the traffic among fabric links on both fabric ASICs and forwarding ASICs.
 
 ```
-> show fabric counters rate mbps
+> show fabric counters rate
 
- Asic     Link    RX         TX
-          ID
- –------  -----   ---------  ----------
- 0         1      0          36113
- ....
- 0        19      0          36107
- 0        20      0          36110
+  ASIC    Link ID    Rx Data Mbps    Tx Data Mbps
+------  ---------  --------------  --------------
+ asic0          0               0            19.8
+ asic0          1               0            19.8
+ asic0          2               0            39.8
+ asic0          3               0            39.8
  ....
 ```