🧑‍💻 Fix warning, adjust tests

Author: thinkyhead

Marlin/src/module/endstops.cpp

@@ -788,7 +788,7 @@ void Endstops::update() {
       G38_did_trigger = true;
       #define _G38_SET(Q) | (stepper.axis_is_moving(_AXIS(Q)) << _AXIS(Q))
       #define _G38_RESP(Q) if (moving[_AXIS(Q)]) { _ENDSTOP_HIT(Q, ENDSTOP); planner.endstop_triggered(_AXIS(Q)); }
-      const Flags<NUM_AXES> moving = { value_t(NUM_AXES)(0 MAIN_AXIS_MAP(_G38_SET)) };
+      const Flags<NUM_AXES> moving = { uvalue_t(NUM_AXES)(0 MAIN_AXIS_MAP(_G38_SET)) };
       MAIN_AXIS_MAP(_G38_RESP);
     }
   #endif

buildroot/tests/LPC1769

@@ -33,7 +33,7 @@ exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3"
 #           REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING \
 #           AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
 #           FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
-#           SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
+#           SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
 #           SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \
 #           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS \
 #           EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA

buildroot/tests/mega2560

@@ -60,8 +60,8 @@ exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 5 | RRDFGSC | UBL | LIN_ADVANCE | Sle
 #
 restore_configs
 opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO NUM_SERVOS 1 \
-        EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 \
-        NUM_RUNOUT_SENSORS 5 FIL_RUNOUT2_PIN 44 FIL_RUNOUT3_PIN 45 FIL_RUNOUT4_PIN 46 FIL_RUNOUT5_PIN 47 \
+        EXTRUDERS 4 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 FAN_KICKSTART_TIME 500 \
+        NUM_RUNOUT_SENSORS 4 FIL_RUNOUT2_PIN 44 FIL_RUNOUT3_PIN 45 FIL_RUNOUT4_PIN 46 FIL_RUNOUT5_PIN 47 \
         FIL_RUNOUT3_STATE HIGH FILAMENT_RUNOUT_SCRIPT '"M600 T%c"'
 opt_enable VIKI2 BOOT_MARLIN_LOGO_ANIMATED SDSUPPORT AUTO_REPORT_SD_STATUS \
            Z_PROBE_SERVO_NR Z_SERVO_ANGLES Z_SERVO_MEASURE_ANGLE DEACTIVATE_SERVOS_AFTER_MOVE Z_SERVO_DEACTIVATE_AFTER_STOW \
@@ -70,7 +70,7 @@ opt_enable VIKI2 BOOT_MARLIN_LOGO_ANIMATED SDSUPPORT AUTO_REPORT_SD_STATUS \
            NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
            DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
            FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FIL_RUNOUT3_PULLUP
-exec_test $1 $2 "Z Servo Probe | Multiple runout sensors (x5)" "$3"
+exec_test $1 $2 "Azteeg X3 Pro | EXTRUDERS 4 | VIKI2 | Servo Probe | Multiple runout sensors (x4)" "$3"
 
 #
 # Extruder Only. No XYZ axes at all.