🎨 Misc. cleanup 29-01

Author: thinkyhead

Marlin/Marlin.ino

@@ -2,7 +2,7 @@
 
   Marlin Firmware
 
-  (c) 2011-2023 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -119,7 +119,6 @@ void spiBegin() {
     while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
   }
 
-
   /** begin spi transaction */
   void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
     // Based on Arduino SPI library
@@ -175,7 +174,6 @@ void spiBegin() {
     SPSR = clockDiv | 0x01;
   }
 
-
 #else // SOFTWARE_SPI || FORCE_SOFT_SPI
 
   // ------------------------

Marlin/src/HAL/AVR/Servo.cpp

@@ -63,7 +63,6 @@
 
 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
 
-
 /************ static functions common to all instances ***********************/
 
 static inline void handle_interrupts(const timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) {

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -91,7 +91,6 @@ void endstop_ISR() { endstops.update(); }
 
 #endif
 
-
 // Install Pin change interrupt for a pin. Can be called multiple times.
 void pciSetup(const int8_t pin) {
   if (digitalPinHasPCICR(pin)) {

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -679,7 +679,6 @@
 #define PF7_PWM     0
 #define PF7_DDR     DDRF
 
-
 /**
  * Some of the pin mapping functions of the Teensduino extension to the Arduino IDE
  * do not function the same as the other Arduino extensions.

Marlin/src/HAL/AVR/pinsDebug.h

@@ -163,7 +163,6 @@ bool pwm_status(uint8_t pin) {
   SERIAL_ECHO_SP(2);
 } // pwm_status
 
-
 const volatile uint8_t* const PWM_other[][3] PROGMEM = {
     { &TCCR0A, &TCCR0B, &TIMSK0 },
     { &TCCR1A, &TCCR1B, &TIMSK1 },
@@ -181,7 +180,6 @@ const volatile uint8_t* const PWM_other[][3] PROGMEM = {
   #endif
 };
 
-
 const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
 
   #ifdef TIMER0A
@@ -217,7 +215,6 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
   #endif
 };
 
-
 #define TCCR_A(T)   pgm_read_word(&PWM_other[T][0])
 #define TCCR_B(T)   pgm_read_word(&PWM_other[T][1])
 #define TIMSK(T)    pgm_read_word(&PWM_other[T][2])

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -120,7 +120,6 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   U8G_ATOMIC_END();
 }
 
-
 #if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -474,7 +474,6 @@ void MarlinSerial<Cfg>::flushTX() {
   }
 }
 
-
 // If not using the USB port as serial port
 #if defined(SERIAL_PORT) && SERIAL_PORT >= 0
   template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -49,7 +49,6 @@ extern volatile uint32_t *SODR_A, *SODR_B, *CODR_A, *CODR_B;
 
 #define PWM_MAP_INIT_ROW(IO,ZZ) { ZZ == 'A' ? SODR_A : SODR_B,  ZZ == 'A' ? CODR_A : CODR_B, 1 << _PIN(IO) }
 
-
 #define PWM_MAP_INIT {  PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_X_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Y_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Z_PIN, 'B'), \

Marlin/src/HAL/DUE/fastio/G2_pins.h

@@ -168,7 +168,6 @@ const G2_PinDescription G2_g_APinDescription[] = {
   { PIOB, PIO_PB21,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 52
   { PIOB, PIO_PB14,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 53
 
-
   // 54 .. 65 - Analog pins
   // ----------------------
   { PIOA, PIO_PA16X1_AD7,    ID_PIOA, PIO_INPUT,    PIO_DEFAULT, PIN_ATTR_ANALOG,                   ADC0,   ADC7,   NOT_ON_PWM,  NOT_ON_TIMER }, // AD0