Pages build and deployment queued for 10 hours and counting #49074
-
Select Topic AreaBug BodyHi! I'd like to ask if anyone knows what to do here. This is the repo: https://github.com/skibidibidop/progress I tried to cancel the run but it fails every time |
Beta Was this translation helpful? Give feedback.
Replies: 20 comments 23 replies
-
|
+1. Im the same. I did see that github had some "red" stasuses and brushed it off but 10 hours after, github seems okay but the Action is still stuck haha |
Beta Was this translation helpful? Give feedback.
-
|
👋 I am following up with the Actions teams. This looks to be just a bad state following yesterday's outage. UPDATE: This is only a bad state in the system. It is not impacting other builds and deployments and will be cleared up automatically in the next 24 hours. You can just ignore this "queued" workflow for now. A new commit on your repo should be triggering a new build properly. I did trigger on https://github.com/skibidibidop/progress/actions/runs/4325078564. |
Beta Was this translation helpful? Give feedback.
-
|
Hola! a mi me pasa lo mismo, he intentado subir actualizaciones desde la aplicación del ordenador pero el workflow pages build and deployment se queda en Queued, he intentado subir una actualización hoy pero sigue igual y no se por qué puede ser, ayuda!!! https://github.com/JCG15/JCG15.github.io/actions/runs/4555910424 |
Beta Was this translation helpful? Give feedback.
-
|
It's March 1st, 2024, and I am facing the same issue now. All of my GitHub pages are being queued, and I can't cancel any workflow runs. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
I am facing the same issue, I have triggered and re-triggered the deployment but it still shows queued up since a while. Any fix around that? |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Same thing on 16/Dec/2024 when I try to cancel the run, it says "Failed to cancel workflow." I am not sure what else I can possibly do. |
Beta Was this translation helpful? Give feedback.
-
|
I am facing the same issue here on 1 March 2025, I am confused whether I do anything wrong or I should just leave it there. A better guidance in a situation like this will improve the overall experience, since similar question has been posted since March 2023. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
I re-ran a failed workflow, but it's still showing queued after 30 minutes. Other new deployments are also failing because of this workflow, and I can't cancel it. |
Beta Was this translation helpful? Give feedback.
-
|
Facing the same issue, 22th April 2025. |
Beta Was this translation helpful? Give feedback.
-
|
Same problem on 15 May 2025. I can deploy just fine in all repositories but one. |
Beta Was this translation helpful? Give feedback.
-
|
Same for me just now...
|
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
I fixed this by going to Settings and futzing with the Pages settings. When I ran it that way, the thing immediately deployed; if nothing else, you can try it. |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Seems Github pages deployment was broken again |
Beta Was this translation helpful? Give feedback.
-
|
This is becoming a recurring problem for me. EDIT: This is getting worse. Every other deployment today looks like this:
EDIT 2: ...
|
Beta Was this translation helpful? Give feedback.
-
|
[laugh] Izzy YC Cheng reacted to your message:
…________________________________
From: ctodd7977-rgb ***@***.***>
Sent: Thursday, August 28, 2025 9:07:45 AM
To: community/community ***@***.***>
Cc: Izzy YC Cheng ***@***.***>; Comment ***@***.***>
Subject: Re: [community/community] Pages build and deployment queued for 10 hours and counting (Discussion #49074)
Why this problem can't be resolved
—
Reply to this email directly, view it on GitHub<#49074 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BCZSZ2WMLLLWQOQXOY35A2T3P3BGDAVCNFSM6AAAAAAVOOO3FWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTIMRUGMYTGNI>.
You are receiving this because you commented.Message ID: ***@***.***>
___________________________________
The information contained in this communication is intended solely for the use of the individual or entity to whom it is addressed and others authorized to receive it. It may contain confidential or legally privileged information. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or taking any action in reliance on the contents of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by responding to this email and then delete it from your system. EY is neither liable for the proper and complete transmission of the information contained in this communication nor for any delay in its receipt.
|
Beta Was this translation helpful? Give feedback.

















👋 I am following up with the Actions teams. This looks to be just a bad state following yesterday's outage. UPDATE: This is only a bad state in the system. It is not impacting other builds and deployments and will be cleared up automatically in the next 24 hours. You can just ignore this "queued" workflow for now.
A new commit on your repo should be triggering a new build properly. I did trigger on https://github.com/skibidibidop/progress/actions/runs/4325078564.