[Mellanox] Update SAI ver. 1.19.0, SDK\FW ver. 4.4.3106\2008.3110 (sonic-net#7820)

Why I did it

* For SAI - Upgrade to Version 1.19.0

- Add support for VxLAN encap TTL uniform model on SPC2/3
- Add ACL entry actions set VRF, set do no learn, add VLAN ID, add VLAN priority
- Add ACL field has VLAN tag
- Bulk counters (improve port statistics performance)
- Create async dump extra as part of debug generate dump
- Create irisc dump on severe health event
- Support 0 port systems (modify get switch mac to work accordingly)
- Set interface vlan up state for ping tool in SONiC
- Support attributes SAI_PORT_ATTR_QOS_SCHEDULER_PROFILE_ID, SAI_PORT_ATTR_QOS_INGRESS_BUFFER_PROFILE_LIST,
SAI_PORT_ATTR_QOS_EGRESS_BUFFER_PROFILE_LIST, SAI_PORT_ATTR_POLICER_ID as part of port create Git stats

* For SDK\FW - Upgrade to Version SDK 4.4.3106, FW 2008_3110

Added Features:

- Increased ACL table
- Enhanced PSAMPLE support
- Added support for Finisar SR4 module in SN3700 systems
- Added support for Python 3.0 in examples.
Fix bugs:

- On LR4 transceivers 00YD278, the firmware incorrectly identified the transceiver
- Reduce memory consumption for virtual LAG
- Fixed PSAMPLE listeners cleanup on SDK drivers unloading.
- On Spectrum-2 and Spectrum-3 systems, slow reaction time to Rx pause packets may lead to buffer overflow on servers.
- BER may be experienced when using 5m DAC cables between SN4700 and SN2700 in 100GbE speed.
- On very rare occasion, when connecting DR4 PAM4 transceiver to 100GbE DR1 NRZ, low BER may be experienced.
- Unexpected packet drops on the port ingress buffer may be experienced when working in 400GbE mode.
Note: When performing ISSU from an older version, this fix won't be applied. For fix to apply, a non-ISSU reset is required.
- Fix SN3800 specific warm boot scenario: Disable interface, Warm Boot, Enable Interface --> link will remain down.

Signed-off-by: Dror Prital <drorp@nvidia.com>

Author: dprital

platform/mellanox/fw.mk

@@ -11,17 +11,17 @@ else
 FW_FROM_URL = n
 endif
 
-MLNX_SPC_FW_VERSION = 13.2008.2526
+MLNX_SPC_FW_VERSION = 13.2008.3110
 MLNX_SPC_FW_FILE = fw-SPC-rel-$(subst .,_,$(MLNX_SPC_FW_VERSION))-EVB.mfa
 $(MLNX_SPC_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
 $(MLNX_SPC_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC_FW_FILE)
 
-MLNX_SPC2_FW_VERSION = 29.2008.2526
+MLNX_SPC2_FW_VERSION = 29.2008.3110
 MLNX_SPC2_FW_FILE = fw-SPC2-rel-$(subst .,_,$(MLNX_SPC2_FW_VERSION))-EVB.mfa
 $(MLNX_SPC2_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
 $(MLNX_SPC2_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC2_FW_FILE)
 
-MLNX_SPC3_FW_VERSION = 30.2008.2526
+MLNX_SPC3_FW_VERSION = 30.2008.3110
 MLNX_SPC3_FW_FILE = fw-SPC3-rel-$(subst .,_,$(MLNX_SPC3_FW_VERSION))-EVB.mfa
 $(MLNX_SPC3_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
 $(MLNX_SPC3_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC3_FW_FILE)

platform/mellanox/mlnx-sai.mk

@@ -1,6 +1,6 @@
 # Mellanox SAI
 
-MLNX_SAI_VERSION = SAIRel1.18.3.2
+MLNX_SAI_VERSION = SAIRel1.19.0
 
 export MLNX_SAI_VERSION
 

platform/mellanox/mlnx-sai/SAI-Implementation

@@ -1,6 +1,6 @@
 MLNX_SDK_BASE_PATH = $(PLATFORM_PATH)/sdk-src/sx-kernel/Switch-SDK-drivers/bin/
 MLNX_SDK_PKG_BASE_PATH = $(MLNX_SDK_BASE_PATH)/$(BLDENV)/
-MLNX_SDK_VERSION = 4.4.2522
+MLNX_SDK_VERSION = 4.4.3106
 MLNX_SDK_ISSU_VERSION = 101
 
 MLNX_SDK_DEB_VERSION = $(subst -,.,$(subst _,.,$(MLNX_SDK_VERSION)))