Dockerfile.j2

{% set prefix = DEFAULT_CONTAINER_REGISTRY %}
{%- if CONFIGURED_ARCH == "armhf"  -%}
FROM {{ prefix }}multiarch/debian-debootstrap:armhf-jessie
{%- elif CONFIGURED_ARCH == "arm64" -%}
FROM {{ prefix }}multiarch/debian-debootstrap:arm64-jessie
{%- else -%}
FROM {{ prefix }}debian:jessie
{%- endif %}

MAINTAINER johnar@microsoft.com

COPY ["no-check-valid-until", "/etc/apt/apt.conf.d/"]

## Remove retired jessie-updates repo
RUN sed -i '/http:\/\/deb.debian.org\/debian jessie-updates main/d' /etc/apt/sources.list

RUN echo "deb [arch=amd64] http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free" >> /etc/apt/sources.list && \
        echo "deb-src [arch=amd64] http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free" >> /etc/apt/sources.list && \
        echo "deb [arch=amd64] http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free" >> /etc/apt/sources.list && \
        echo "deb-src [arch=amd64] http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free" >> /etc/apt/sources.list

{% if CONFIGURED_ARCH == "armhf" %}
RUN echo "deb [arch=armhf] http://deb.debian.org/debian jessie main contrib non-free" > /etc/apt/sources.list && \
        echo "deb-src [arch=armhf] http://deb.debian.org/debian jessie main contrib non-free" >> /etc/apt/sources.list && \
        echo "deb [arch=armhf] http://security.debian.org jessie/updates main contrib non-free" >> /etc/apt/sources.list && \
        echo "deb-src [arch=armhf] http://security.debian.org jessie/updates main contrib non-free" >> /etc/apt/sources.list
{% elif CONFIGURED_ARCH == "arm64" %}
RUN echo "deb [arch=arm64] http://archive.debian.org/debian jessie main contrib non-free" > /etc/apt/sources.list && \
        echo "deb-src [arch=arm64] http://archive.debian.org/debian jessie main contrib non-free" >> /etc/apt/sources.list && \
        echo "deb-src [arch=arm64] http://archive.debian.org/debian jessie-backports main contrib non-free" >> /etc/apt/sources.list && \
        echo "deb [arch=arm64] http://archive.debian.org/debian jessie-backports main contrib non-free" >> /etc/apt/sources.list
{% endif %}

## Make apt-get non-interactive
ENV DEBIAN_FRONTEND=noninteractive

RUN apt-get update && apt-get install -y \
        apt-utils \
        default-jre-headless \
        openssh-server \
        curl \
        wget \
        unzip \
        git \
        build-essential \
        libtool \
        lintian \
        sudo \
        dh-make \
        dh-exec \
        kmod \
        libtinyxml2-2 \
        libboost-program-options1.55-dev \
        libtinyxml2-dev \
        python \
        python-pip \
        libncurses5-dev \
        texinfo \
        dh-autoreconf \
        python3-pip \
        doxygen \
        devscripts \
        git-buildpackage \
        perl-modules \
        libswitch-perl \
        dh-systemd \
        jq \
# For quagga build
        libreadline-dev \
        texlive-latex-base \
        texlive-generic-recommended \
        texlive-fonts-recommended \
        libpam0g-dev \
        libpam-dev \
        libcap-dev \
        imagemagick \
        ghostscript \
        groff \
        libpcre3-dev \
        gawk \
        chrpath \
# For frr build
        libc-ares-dev \
        hardening-wrapper \
        libsnmp-dev \
        libjson0 \
        libjson0-dev \
        libsystemd-dev \
        python-ipaddr \
        install-info \
# For libnl3 (local) build
        cdbs \
# For SAI meta build
        libxml-simple-perl \
        graphviz \
        aspell \
# For linux build
        bc \
        fakeroot \
        build-essential \
        devscripts \
        quilt \
        stgit \
# For platform-modules build
        module-assistant \
# For thrift build\
        gem2deb \
        libboost-all-dev \
        libevent-dev \
        libglib2.0-dev \
        libqt4-dev \
        python-all-dev \
        python-twisted \
        php5-dev \
        phpunit \
        libbit-vector-perl \
        openjdk-7-jdk \
        javahelper \
        maven-debian-helper \
        ant \
        libmaven-ant-tasks-java \
        libhttpclient-java \
        libslf4j-java \
        libservlet3.1-java \
        qt5-default \
        pkg-php-tools \
# For mellanox sdk build
        libpcre3 \
        libpcre3-dev \
        byacc \
        flex \
        libglib2.0-dev \
        bison \
        expat \
        libexpat1-dev \
        dpatch \
        libdb-dev \
        iptables-dev \
        swig \
        ctags \
# For mellanox sai build
        libtool-bin \
        libxml2-dev \
# For BFN sdk build
        libusb-1.0-0-dev \
        libcurl3-nss-dev \
        libunwind8-dev \
        telnet \
        libc-ares2 \
        libgoogle-perftools4 \
# For build image
        cpio \
        squashfs-tools \
        zip \
{%- if CONFIGURED_ARCH == "amd64" %}
# For broadcom sdk build
        linux-compiler-gcc-4.9-x86 \
{%- endif %}
        linux-kbuild-3.16 \
# teamd build
        libdaemon-dev \
        libdbus-1-dev \
        libjansson-dev \
# For cavium sdk build
        libpcap-dev \
        dnsutils \
        libusb-dev \
# For debian image reconfiguration
        augeas-tools \
# For p4 build
        libyaml-dev \
        libevent-dev \
        libjudy-dev \
        libedit-dev \
        libnanomsg-dev \
        python-stdeb \
# For redis build
        libjemalloc-dev \
# For mft kernel module build
        dkms \
# For Jenkins static analysis, unit testing and code coverage
        cppcheck \
        clang \
        pylint \
        gcovr \
        python-pytest=2.6.3* \
        python3-pytest=2.6.3* \
        python-pytest-cov \
        python3-pytest-cov \
        python-parse \
# For snmpd
        libmysqlclient-dev \
        libmysqld-dev \
        libperl-dev \
        libpci-dev \
        libpci3 \
        libsensors4 \
        libsensors4-dev \
        libwrap0-dev \
# For mpdecimal
        docutils-common \
        libjs-sphinxdoc \
        libjs-underscore \
        python-docutils \
        python-markupsafe \
        python-pygments \
        python-roman \
        sphinx-common \
# For sonic config engine testing
        python-lxml \
        python-netaddr \
        python-ipaddr \
        python-yaml \
# For lockfile
        procmail \
# For gtest
        libgtest-dev \
        cmake \
# For pam_tacplus build
        autoconf-archive \
# For python-based swsscommon
        swig3.0 \
# For iproute2
        cm-super-minimal \
        libatm1-dev \
        libelf-dev \
        libmnl-dev \
        libselinux1-dev \
        linuxdoc-tools \
        lynx \
        texlive-latex-extra \
        texlive-latex-recommended \
# For bash
        texi2html \
        sharutils \
        locales \
        time \
        man2html-base \
        libcunit1 \
        libcunit1-dev \
# For initramfs
        bash-completion \
# For audisp-tacplus
        libauparse-dev \
        auditd \
{% if CONFIGURED_ARCH == "amd64" -%}
# For sonic vs image build
        dosfstools \
        qemu-kvm \
        libvirt-bin
{%- else -%}
        bash-completion
{%- endif %}

# For jenkins slave
# RUN apt-get -y install ca-certificates-java=20161107~bpo8+1 openjdk-8-jdk

# For linux build
{% if CONFIGURED_ARCH != "arm64" %}
RUN apt-get -y build-dep linux
{%- endif %}

# For gobgp and telemetry build
RUN export VERSION=1.14.2 \
{%- if CONFIGURED_ARCH == "armhf" %}
 && wget https://storage.googleapis.com/golang/go$VERSION.linux-armv6l.tar.gz \
 && tar -C /usr/local -xzf go$VERSION.linux-armv6l.tar.gz \
{%- elif CONFIGURED_ARCH == "arm64" %}
 && wget https://storage.googleapis.com/golang/go$VERSION.linux-arm64.tar.gz \
 && tar -C /usr/local -xzf go$VERSION.linux-arm64.tar.gz \
{%- else %}
 && wget https://storage.googleapis.com/golang/go$VERSION.linux-amd64.tar.gz \
 && tar -C /usr/local -xzf go$VERSION.linux-amd64.tar.gz \
{%- endif %}
 && echo 'export GOROOT=/usr/local/go' >> /etc/bash.bashrc \
 && echo 'export PATH=$PATH:$GOROOT/bin' >> /etc/bash.bashrc \
 && rm go$VERSION.linux-*.tar.gz

# Upgrade pip2
# Note: use pip2 specific version so jinja2 2.10 will install
RUN python2 -m pip install -U pip==9.0.3

# For p4 build
RUN pip install \
        ctypesgen==0.r125 \
        crc16

# For sonic config engine testing
RUN pip install pyangbind==0.6.0
# Note: force upgrade debian packaged jinja2, if installed
RUN pip install --force-reinstall --upgrade "jinja2>=2.10"

# For templating (requiring jinja2)
RUN pip install j2cli==0.3.10

# For vs image build
RUN pip install pexpect==4.6.0

# For sonic-utilities build
RUN pip install mockredispy==2.9.3
RUN pip install pytest-runner==4.4
RUN pip install setuptools==40.8.0

# For sonic-swss-common testing
RUN pip install Pympler==0.8

# Install dependencies for isc-dhcp-relay build
RUN apt-get -y build-dep isc-dhcp

# Install vim
RUN apt-get install -y vim

# Install rsyslog
RUN apt-get install -y rsyslog

RUN cd /usr/src/gtest && cmake . && make -C /usr/src/gtest

RUN mkdir /var/run/sshd
EXPOSE 22

# Install depot-tools (for git-retry)
RUN git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git /usr/share/depot_tools
ENV PATH /usr/share/depot_tools:$PATH

# Install docker engine 17.03.2~ce-0 inside docker and enable experimental feature
RUN apt-get update
RUN apt-get install -y \
           apt-transport-https \
           ca-certificates \
           curl \
           gnupg2 \
           software-properties-common
RUN curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add -
RUN add-apt-repository \
           "deb [arch={{ CONFIGURED_ARCH }}] https://download.docker.com/linux/debian \
           $(lsb_release -cs) \
           stable"
RUN apt-get update
{%- if CONFIGURED_ARCH == "amd64" %}
RUN apt-get install -y docker-ce=17.03.2~ce-0~debian-jessie
{%- elif CONFIGURED_ARCH == "arm64" %}
RUN apt-get install -y docker-ce=18.03.1~ce-0~debian
{%- elif CONFIGURED_ARCH == "armhf" %}
RUN apt-get install -y docker-ce=18.06.3~ce~3-0~debian
{%- endif %}
RUN echo "DOCKER_OPTS=\"--experimental --storage-driver=vfs {{ DOCKER_EXTRA_OPTS }}\"" >> /etc/default/docker

# For jenkins slave
RUN echo "deb [arch={{ CONFIGURED_ARCH }}] http://archive.debian.org/debian jessie-backports main" >> /etc/apt/sources.list
RUN apt-get -o Acquire::Check-Valid-Until=false update
RUN apt-get -y -o Acquire::Check-Valid-Until=false install ca-certificates-java=20161107~bpo8+1 openjdk-8-jdk

# Install m2crypto package, needed by SWI tools
RUN pip install m2crypto==0.36.0

# Install swi tools
RUN python -m pip install git+https://github.com/aristanetworks/swi-tools.git@d51761ec0bb93c73039233f3c01ed48235ffad00

# Install Bazel build system (amd64 and arm64 architectures are supported using this method)
# TODO(PINS): Remove once pre-build Bazel binaries are available for armhf (armv7l)
{%- if CONFIGURED_ARCH == "amd64" or CONFIGURED_ARCH == "arm64" %}
ARG bazelisk_url=https://github.com/bazelbuild/bazelisk/releases/latest/download/bazelisk-linux-{{ CONFIGURED_ARCH }}
RUN curl -fsSL -o /usr/local/bin/bazel ${bazelisk_url} && chmod 755 /usr/local/bin/bazel
{% endif -%}