Skip to content

Commit e99b29c

Browse files
Sebazzzkpishere
Sebazzz
authored and
kpishere
committed
Creality v4.5.3 (CR-6 SE, CR-6 MAX) (MarlinFirmware#20468)
1 parent 7f014b3 commit e99b29c

File tree

5 files changed

+162
-90
lines changed

5 files changed

+162
-90
lines changed

‎Marlin/src/core/boards.h‎

Lines changed: 5 additions & 4 deletions
Original file line numberDiff line numberDiff line change
@@ -330,10 +330,11 @@
330330
#define BOARD_CREALITY_V4 4037 // Creality v4.x (STM32F103RE)
331331
#define BOARD_CREALITY_V427 4038 // Creality v4.2.7 (STM32F103RE)
332332
#define BOARD_CREALITY_V452 4039 // Creality v4.5.2 (STM32F103RE)
333-
#define BOARD_TRIGORILLA_PRO 4040 // Trigorilla Pro (STM32F103ZET6)
334-
#define BOARD_FLY_MINI 4041 // FLY MINI (STM32F103RCT6)
335-
#define BOARD_FLSUN_HISPEED 4042 // FLSUN HiSpeedV1 (STM32F103VET6)
336-
#define BOARD_BEAST 4043 // STM32F103RET6 Libmaple-based controller
333+
#define BOARD_CREALITY_V453 4040 // Creality v4.5.3 (STM32F103RE)
334+
#define BOARD_TRIGORILLA_PRO 4041 // Trigorilla Pro (STM32F103ZET6)
335+
#define BOARD_FLY_MINI 4042 // FLY MINI (STM32F103RCT6)
336+
#define BOARD_FLSUN_HISPEED 4043 // FLSUN HiSpeedV1 (STM32F103VET6)
337+
#define BOARD_BEAST 4044 // STM32F103RET6 Libmaple-based controller
337338

338339
//
339340
// ARM Cortex-M4F

‎Marlin/src/pins/pins.h‎

Lines changed: 2 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -532,6 +532,8 @@
532532
#include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality
533533
#elif MB(CREALITY_V452)
534534
#include "stm32f1/pins_CREALITY_V452.h" // STM32F1 env:STM32F103RET6_creality
535+
#elif MB(CREALITY_V453)
536+
#include "stm32f1/pins_CREALITY_V453.h" // STM32F1 env:STM32F103RET6_creality
535537
#elif MB(TRIGORILLA_PRO)
536538
#include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro
537539
#elif MB(FLY_MINI)

‎Marlin/src/pins/stm32f1/pins_CREALITY_V452.h‎

Lines changed: 4 additions & 86 deletions
Original file line numberDiff line numberDiff line change
@@ -24,97 +24,15 @@
2424
* Creality v4.5.2 (STM32F103RET6) board pin assignments
2525
*/
2626

27-
#if NOT_TARGET(__STM32F1__)
28-
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29-
#elif HOTENDS > 1 || E_STEPPERS > 1
30-
#error "CREALITY_V452 supports up to 1 hotends / E-steppers. Comment out this line to continue."
27+
#if HOTENDS > 1 || E_STEPPERS > 1
28+
#error "Creality v4.5.2 only supports one hotend / E-stepper. Comment out this line to continue."
3129
#endif
3230

3331
#define BOARD_NAME "Creality v4.5.2"
34-
#define DEFAULT_MACHINE_NAME "Creality3D"
3532

36-
//
37-
// Release PB4 (Z_STEP_PIN) from JTAG NRST role
38-
//
39-
#define DISABLE_DEBUG
40-
41-
#define BOARD_NO_NATIVE_USB
42-
43-
//
44-
// EEPROM
45-
//
46-
#if NO_EEPROM_SELECTED
47-
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
48-
//#define SDCARD_EEPROM_EMULATION
49-
#endif
50-
51-
#if ENABLED(IIC_BL24CXX_EEPROM)
52-
#define IIC_EEPROM_SDA PA11
53-
#define IIC_EEPROM_SCL PA12
54-
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
55-
#elif ENABLED(SDCARD_EEPROM_EMULATION)
56-
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
57-
#endif
58-
59-
//
60-
// Limit Switches
61-
//
62-
#define X_STOP_PIN PC4
63-
#define Y_STOP_PIN PC5
64-
#define Z_STOP_PIN PA4
65-
66-
#define FIL_RUNOUT_PIN PA7
67-
68-
//
69-
// Probe
70-
//
71-
#define PROBE_TARE_PIN PA5
72-
#define PROBE_ENABLE_PIN PC6 // Optoswitch to Enable Z Probe
73-
74-
//
75-
// Steppers
76-
//
77-
#define X_ENABLE_PIN PC3
78-
#define X_STEP_PIN PB8
79-
#define X_DIR_PIN PB7
80-
81-
#define Y_ENABLE_PIN PC3
82-
#define Y_STEP_PIN PB6
83-
#define Y_DIR_PIN PB5
84-
85-
#define Z_ENABLE_PIN PC3
86-
#define Z_STEP_PIN PB4
87-
#define Z_DIR_PIN PB3
88-
89-
#define E0_ENABLE_PIN PC3
90-
#define E0_STEP_PIN PC2
91-
#define E0_DIR_PIN PB9
92-
93-
//
94-
// Temperature Sensors
95-
//
96-
#define TEMP_0_PIN PB1 // TH1
97-
#define TEMP_BED_PIN PB0 // TB1
98-
99-
//
100-
// Heaters / Fans
101-
//
10233
#define HEATER_0_PIN PA1 // HEATER1
10334
#define HEATER_BED_PIN PA2 // HOT BED
104-
10535
#define FAN_PIN PA0 // FAN
106-
#define FAN_SOFT_PWM
107-
108-
//
109-
// SD Card
110-
//
111-
#define SD_DETECT_PIN PC7
112-
#define NO_SD_HOST_DRIVE // SD is only seen by the printer
113-
114-
#define SDIO_SUPPORT // Extra added by Creality
115-
#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h
36+
#define PROBE_ENABLE_PIN PC6 // Optoswitch to Enable Z Probe
11637

117-
//
118-
// Misc. Functions
119-
//
120-
#define CASE_LIGHT_PIN PA6
38+
#include "pins_CREALITY_V45x.h"

‎Marlin/src/pins/stm32f1/pins_CREALITY_V453.h‎

Lines changed: 38 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,38 @@
1+
/**
2+
* Marlin 3D Printer Firmware
3+
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
4+
*
5+
* Based on Sprinter and grbl.
6+
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
7+
*
8+
* This program is free software: you can redistribute it and/or modify
9+
* it under the terms of the GNU General Public License as published by
10+
* the Free Software Foundation, either version 3 of the License, or
11+
* (at your option) any later version.
12+
*
13+
* This program is distributed in the hope that it will be useful,
14+
* but WITHOUT ANY WARRANTY; without even the implied warranty of
15+
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16+
* GNU General Public License for more details.
17+
*
18+
* You should have received a copy of the GNU General Public License
19+
* along with this program. If not, see <https://www.gnu.org/licenses/>.
20+
*
21+
*/
22+
23+
/**
24+
* Creality v4.5.3 (STM32F103RET6) board pin assignments
25+
*/
26+
27+
#if HOTENDS > 1 || E_STEPPERS > 1
28+
#error "Creality v4.5.3 only supports one hotend / E-stepper. Comment out this line to continue."
29+
#endif
30+
31+
#define BOARD_NAME "Creality v4.5.3"
32+
33+
#define HEATER_0_PIN PB14 // HEATER1
34+
#define HEATER_BED_PIN PB13 // HOT BED
35+
#define FAN_PIN PB15 // FAN
36+
#define PROBE_ENABLE_PIN PB2 // Optoswitch to Enable Z Probe
37+
38+
#include "pins_CREALITY_V45x.h"

‎Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h‎

Lines changed: 113 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,113 @@
1+
/**
2+
* Marlin 3D Printer Firmware
3+
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
4+
*
5+
* Based on Sprinter and grbl.
6+
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
7+
*
8+
* This program is free software: you can redistribute it and/or modify
9+
* it under the terms of the GNU General Public License as published by
10+
* the Free Software Foundation, either version 3 of the License, or
11+
* (at your option) any later version.
12+
*
13+
* This program is distributed in the hope that it will be useful,
14+
* but WITHOUT ANY WARRANTY; without even the implied warranty of
15+
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16+
* GNU General Public License for more details.
17+
*
18+
* You should have received a copy of the GNU General Public License
19+
* along with this program. If not, see <https://www.gnu.org/licenses/>.
20+
*
21+
*/
22+
23+
/**
24+
* Creality v4.5.2 and v4.5.3 (STM32F103RET6) board pin assignments
25+
*/
26+
27+
#if NOT_TARGET(__STM32F1__)
28+
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29+
#endif
30+
31+
#define DEFAULT_MACHINE_NAME "Creality3D"
32+
33+
//
34+
// Release PB4 (Z_STEP_PIN) from JTAG NRST role
35+
//
36+
#define DISABLE_DEBUG
37+
38+
#define BOARD_NO_NATIVE_USB
39+
40+
//
41+
// EEPROM
42+
//
43+
#if NO_EEPROM_SELECTED
44+
#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
45+
//#define SDCARD_EEPROM_EMULATION
46+
#endif
47+
48+
#if ENABLED(IIC_BL24CXX_EEPROM)
49+
#define IIC_EEPROM_SDA PA11
50+
#define IIC_EEPROM_SCL PA12
51+
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16)
52+
#elif ENABLED(SDCARD_EEPROM_EMULATION)
53+
#define MARLIN_EEPROM_SIZE 0x800 // 2Kb
54+
#endif
55+
56+
//
57+
// Limit Switches
58+
//
59+
#define X_STOP_PIN PC4
60+
#define Y_STOP_PIN PC5
61+
#define Z_STOP_PIN PA4
62+
63+
#define FIL_RUNOUT_PIN PA7
64+
65+
//
66+
// Probe
67+
//
68+
#define PROBE_TARE_PIN PA5
69+
70+
//
71+
// Steppers
72+
//
73+
#define X_ENABLE_PIN PC3
74+
#define X_STEP_PIN PB8
75+
#define X_DIR_PIN PB7
76+
77+
#define Y_ENABLE_PIN PC3
78+
#define Y_STEP_PIN PB6
79+
#define Y_DIR_PIN PB5
80+
81+
#define Z_ENABLE_PIN PC3
82+
#define Z_STEP_PIN PB4
83+
#define Z_DIR_PIN PB3
84+
85+
#define E0_ENABLE_PIN PC3
86+
#define E0_STEP_PIN PC2
87+
#define E0_DIR_PIN PB9
88+
89+
//
90+
// Temperature Sensors
91+
//
92+
#define TEMP_0_PIN PB1 // TH1
93+
#define TEMP_BED_PIN PB0 // TB1
94+
95+
//
96+
// Heaters / Fans
97+
//
98+
99+
#define FAN_SOFT_PWM
100+
101+
//
102+
// SD Card
103+
//
104+
#define SD_DETECT_PIN PC7
105+
#define NO_SD_HOST_DRIVE // SD is only seen by the printer
106+
107+
#define SDIO_SUPPORT // Extra added by Creality
108+
#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h
109+
110+
//
111+
// Misc. Functions
112+
//
113+
#define CASE_LIGHT_PIN PA6

0 commit comments

Comments
 (0)