At the moment tox supports three configuration locations prioritized in the following order:
pyproject.toml,tox.ini,setup.cfg.
As far as the configuration format at the moment we only support standard ConfigParser_ "ini-style" format
(there is a plan to add a pure TOML one soon).
tox.ini and setup.cfg are such files. Note that setup.cfg requires the content to be under the
tox:tox and testenv sections and is otherwise ignored. pyproject.toml on the other hand is
in TOML format. However, one can inline the ini-style format under the tool.tox.legacy_tox_ini key
as a multi-line string.
Below you find the specification for the ini-style format, but you might want to skim some :doc:`examples` first and use this page as a reference.
Global settings are defined under the tox section as:
[tox]
minversion = 3.4.0.. conf:: minversion Define the minimal tox version required to run; if the host's tox version is less than this the tool will create an environment and provision it with a version of tox that satisfies this under :conf:`provision_tox_env`. .. versionchanged:: 3.23.0 When tox is invoked with the ``--no-provision`` flag, the provision won't be attempted, tox will fail instead.
.. conf:: requires ^ LIST of PEP-508
.. versionadded:: 3.2.0
Specify python packages that need to exist alongside the tox installation for the tox build
to be able to start (must be PEP-508_ compliant). Use this to specify plugin requirements
(or the version of ``virtualenv`` - determines the default ``pip``, ``setuptools``, and ``wheel``
versions the tox environments start with). If these dependencies are not specified tox will create
:conf:`provision_tox_env` environment so that they are satisfied and delegate all calls to that.
.. code-block:: ini
[tox]
requires = tox-pipenv
setuptools >= 30.0.0
.. versionchanged:: 3.23.0
When tox is invoked with the ``--no-provision`` flag,
the provision won't be attempted, tox will fail instead.
.. conf:: provision_tox_env ^ string ^ .tox
.. versionadded:: 3.8.0
Name of the virtual environment used to provision a tox having all dependencies specified
inside :conf:`requires` and :conf:`minversion`.
.. versionchanged:: 3.23.0
When tox is invoked with the ``--no-provision`` flag,
the provision won't be attempted, tox will fail instead.
.. conf:: toxworkdir ^ PATH ^ {toxinidir}/.tox
Directory for tox to generate its environments into, will be created if it does not exist.
.. conf:: temp_dir ^ PATH ^ {toxworkdir}/.tmp
.. versionadded:: 3.5.0
Directory where to put tox temporary files. For example: we create a hard link (if possible,
otherwise new copy) in this directory for the project package. This ensures tox works correctly
when having parallel runs (as each session will have its own copy of the project package - e.g.
the source distribution).
.. conf:: skipsdist ^ true|false ^ false Flag indicating to perform the packaging operation or not. Set it to ``true`` when using tox for an application, instead of a library.
.. conf:: setupdir ^ PATH ^ {toxinidir}
Indicates where the packaging root file exists (historically the ``setup.py`` for ``setuptools``).
This will be the working directory when performing the packaging.
.. conf:: distdir ^ PATH ^ {toxworkdir}/dist
Directory where the packaged source distribution should be put. Note this is cleaned at the start of
every packaging invocation.
.. conf:: sdistsrc ^ PATH ^ {toxworkdir}/dist
Do not build the package, but instead use the latest package available under this path.
You can override it via the command line flag ``--installpkg``.
.. conf:: distshare ^ PATH ^ {homedir}/.tox/distshare
Folder where the packaged source distribution will be moved, this is not cleaned between packaging
invocations. On Jenkins (exists ``JENKINS_URL`` or ``HUDSON_URL`` environment variable)
the default path is ``{toxworkdir}/distshare``.
.. conf:: envlist ^ comma separated values
Determining the environment list that ``tox`` is to operate on happens in this order (if any is found,
no further lookups are made):
* command line option ``-eENVLIST``
* environment variable ``TOXENV``
* ``tox.ini`` file's ``envlist``
.. versionadded:: 3.4.0
Which tox environments are run during the tox invocation can be further filtered
via the operating system environment variable ``TOX_SKIP_ENV`` regular expression
(e.g. ``py27.*`` means **don't** evaluate environments that start with the key ``py27``).
Skipped environments will be logged at level two verbosity level.
.. conf:: skip_missing_interpreters ^ config|true|false ^ config
.. versionadded:: 1.7.2
Setting this to ``true`` will force ``tox`` to return success even
if some of the specified environments were missing. This is useful for some CI
systems or when running on a developer box, where you might only have a subset of
all your supported interpreters installed but don't want to mark the build as
failed because of it. As expected, the command line switch always overrides
this setting if passed on the invocation. Setting it to ``config``
means that the value is read from the config file.
.. conf:: ignore_basepython_conflict ^ true|false ^ false
.. versionadded:: 3.1.0
tox allows setting the python version for an environment via the :conf:`basepython`
setting. If that's not set tox can set a default value from the environment name (
e.g. ``py37`` implies Python 3.7). Matching up the python version with the environment
name has became expected at this point, leading to surprises when some configs don't
do so. To help with sanity of users a warning will be emitted whenever the environment
name version does not matches up with this expectation. In a future version of tox,
this warning will become an error.
Furthermore, we allow hard enforcing this rule (and bypassing the warning) by setting
this flag to ``true``. In such cases we ignore the :conf:`basepython` and instead
always use the base python implied from the Python name. This allows you to
configure :conf:`basepython` in the global testenv without affecting environments
that have implied base python versions.
.. conf:: isolated_build ^ true|false ^ false
.. versionadded:: 3.3.0
Activate isolated build environment. tox will use a virtual environment to build
a source distribution from the source tree. For build tools and arguments use
the ``pyproject.toml`` file as specified in `PEP-517`_ and `PEP-518`_. To specify the
virtual environment Python version define use the :conf:`isolated_build_env` config
section.
.. conf:: isolated_build_env ^ string ^ .package
.. versionadded:: 3.3.0
Name of the virtual environment used to create a source distribution from the
source tree.
It is possible to override global settings inside a Jenkins_ instance (detection
is done by checking for existence of the JENKINS_URL environment variable)
by using the tox:jenkins section:
[tox:jenkins]
commands = ... # override settings for the jenkins contextTest environments are defined under the testenv section and individual
testenv:NAME sections, where NAME is the name of a specific
environment.
[testenv]
commands = ...
[testenv:NAME]
commands = ...Settings defined in the top-level testenv section are automatically
inherited by individual environments unless overridden. Test environment names
can consist of alphanumeric characters and dashes; for example:
py38-django30. The name will be split on dashes into multiple factors,
meaning py38-django30 will be split into two factors: py38 and
django30. tox defines a number of default factors, which correspond to
various versions and implementations of Python and provide default values for
:conf:`basepython`:
pyNM: configuresbasepython = pythonN.MpyN: configuresbasepython = pythonNpy: configuresbasepython = pythonpypyN: configuresbasepython = pypyNpypy: configuresbasepython = pypyjythonN: configuresbasepython = jythonNjython: configuresbasepython = jython
It is also possible to define what's know as generative names, where an
individual section maps to multiple environments. For example,
py{37,38}-django{30,31} would generate four environments, each
consisting of two factors: py37-django30 (py37, django30),
py37-django31 (py37, django31), py38-django30 (py38,
django30), and py38-django31 (py38, django31). Combined, these
features provide the ability to write very concise tox.ini files. This is
discussed further in :ref:`below <generating-environments>`.
Complete list of settings that you can put into testenv* sections:
.. conf:: basepython ^ NAME-OR-PATH
Name or path to a Python interpreter which will be used for creating the virtual environment,
this determines in practice the python for what we'll create a virtual isolated environment.
Use this to specify the python version for a tox environment. If not specified, the virtual
environments factors (e.g. name part) will be used to automatically set one. For example, ``py37``
means ``python3.7``, ``py3`` means ``python3`` and ``py`` means ``python``.
:conf:`provision_tox_env` environment does not inherit this setting from the ``toxenv`` section.
.. versionchanged:: 3.1
After resolving this value if the interpreter reports back a different version number
than implied from the name a warning will be printed by default. However, if
:conf:`ignore_basepython_conflict` is set, the value is ignored and we force the
``basepython`` implied from the factor name.
.. conf:: commands ^ ARGVLIST
The commands to be called for testing. Only execute if :conf:`commands_pre` succeed.
Each line is interpreted as one command; however a command can be split over
multiple lines by ending the line with the ``\`` character.
Commands will execute one by one in sequential fashion until one of them fails (their exit
code is non-zero) or all of them succeed. The exit code of a command may be ignored (meaning
they are always considered successful even if they don't exist) by prefixing the command with a dash (``-``) - this is
similar to how ``make`` recipe lines work. The outcome of the environment is considered successful
only if all commands (these + setup + teardown) succeeded (exit code ignored via the
``-`` or success exit code value of zero).
:note: the virtual environment binary path (the ``bin`` folder within) is prepended to the os ``PATH``,
meaning commands will first try to resolve to an executable from within the
virtual environment, and only after that outside of it. Therefore ``python``
translates as the virtual environments ``python`` (having the same runtime version
as the :conf:`basepython`), and ``pip`` translates as the virtual environments ``pip``.
:note: Inline scripts can be used, however note these are discovered from the project root directory,
and is not influenced by :conf:`changedir` (this only affects the runtime current working directory).
To make this behaviour explicit we recommend that you make inline scripts absolute paths by
prepending ``{toxinidir}``, instead of ``path/to/my_script`` prefer
``{toxinidir}{/}path{/}to{/}my_script``. If your inline script is platform dependent refer to
:ref:`platform-specification` on how to select different script per platform.
.. conf:: commands_pre ^ ARGVLIST
.. versionadded:: 3.4
Commands to run before running the :conf:`commands`.
All evaluation and configuration logic applies from :conf:`commands`.
.. conf:: commands_post ^ ARGVLIST
.. versionadded:: 3.4
Commands to run after running the :conf:`commands`. Execute regardless of the outcome of
both :conf:`commands` and :conf:`commands_pre`.
All evaluation and configuration logic applies from :conf:`commands`.
.. conf:: install_command ^ ARGV ^ python -m pip install {opts} {packages}
.. versionadded:: 1.6
Determines the command used for installing packages into the virtual environment;
both the package under test and its dependencies (defined with :conf:`deps`).
Must contain the substitution key ``{packages}`` which will be replaced by the package(s) to
install. You should also accept ``{opts}`` if you are using pip -- it will contain index server options
such as ``--pre`` (configured as ``pip_pre``) and potentially index-options from the
deprecated :conf:`indexserver` option.
.. note::
You can also provide a single arbitrary command to the ``install_command``. Please take care that this command can be
executed on the supported operating systems. When executing shell scripts we recommend to not specify the script
directly but instead pass it to the appropriate shell as argument (e.g. prefer ``bash script.sh`` over
``script.sh``).
.. conf:: list_dependencies_command ^ ARGV ^ python -m pip freeze
.. versionadded:: 2.4
The ``list_dependencies_command`` setting is used for listing
the packages installed into the virtual environment.
.. conf:: ignore_errors ^ true|false ^ false
.. versionadded:: 2.0
If ``false``, a non-zero exit code from one command will abort execution of
commands for that environment.
If ``true``, a non-zero exit code from one command will be ignored and
further commands will be executed. The overall status will be
"commands failed", i.e. tox will exit non-zero in case any command failed.
It may be helpful to note that this setting is analogous to the ``-k`` or
``--keep-going`` option of GNU Make.
Note that in tox 2.0, the default behavior of tox with respect to treating
errors from commands changed. tox < 2.0 would ignore errors by default. tox
>= 2.0 will abort on an error by default, which is safer and more typical
of CI and command execution tools, as it doesn't make sense to run tests if
installing some prerequisite failed and it doesn't make sense to try to
deploy if tests failed.
.. conf:: pip_pre ^ true|false ^ false
.. versionadded:: 1.9
If ``true``, adds ``--pre`` to the ``opts`` passed to
:conf:`install_command`. If :conf:`install_command` uses pip, this
will cause it to install the latest available pre-release of any
dependencies without a specified version. If ``false``, pip
will only install final releases of unpinned dependencies.
Passing the ``--pre`` command-line option to tox will force this to
``true`` for all testenvs.
Don't set this option if your :conf:`install_command` does not use pip.
.. conf:: allowlist_externals ^ MULTI-LINE-LIST
.. versionadded:: 3.18
Each line specifies a command name (in glob-style pattern format)
which can be used in the ``commands`` section without triggering
a "not installed in virtualenv" warning. Example: if you use the
unix ``make`` for running tests you can list ``allowlist_externals=make``
or ``allowlist_externals=/usr/bin/make`` if you want more precision.
If you don't want tox to issue a warning in any case, just use
``allowlist_externals=*`` which will match all commands (not recommended).
.. note::
``whitelist_externals`` has the same meaning and usage as ``allowlist_externals``
but it is now deprecated.
.. conf:: changedir ^ PATH ^ {toxinidir}
Change the current working directory when executing the test command.
.. note::
If the directory does not exist yet, it will be created.
.. conf:: deps ^ MULTI-LINE-LIST
Environment dependencies - installed into the environment (see :conf:`install_command`) prior
to project after environment creation. One dependency (a file, a URL or a package name) per
line. Must be PEP-508_ compliant. All installer commands are executed using the toxinidir_ as the
current working directory.
.. code-block:: ini
[testenv]
deps =
pytest
pytest-cov >= 3.5
pywin32 >=1.0 ; sys_platform == 'win32'
octomachinery==0.0.13 # pyup: < 0.1.0 # disable feature updates
.. versionchanged:: 2.3
Support for index servers is now deprecated, and its usage discouraged.
.. versionchanged:: 3.9
Comment support on the same line as the dependency. When feeding the content to the install
tool we'll strip off content (including) from the first comment marker (``#``)
preceded by one or more space. For example, if a dependency is
``octomachinery==0.0.13 # pyup: < 0.1.0 # disable feature updates`` it will be turned into
just ``octomachinery==0.0.13``.
.. conf:: platform ^ REGEX
.. versionadded:: 2.0
A testenv can define a new ``platform`` setting as a regular expression.
If a non-empty expression is defined and does not match against the
``sys.platform`` string the entire test environment will be skipped and
none of the commands will be executed. Running ``tox -e <platform_name>``
will run commands for a particular platform and skip the rest.
.. conf:: setenv ^ MULTI-LINE-LIST
.. versionadded:: 0.9
Each line contains a NAME=VALUE environment variable setting which
will be used for all test command invocations as well as for installing
the sdist package into a virtual environment.
Notice that when updating a path variable, you can consider the use of
variable substitution for the current value and to handle path separator.
.. code-block:: ini
[testenv]
setenv =
PYTHONPATH = {env:PYTHONPATH}{:}{toxinidir}
.. versionadded:: 3.20
Support for comments. Lines starting with ``#`` are ignored.
Support for environment files. Lines starting with the ``file|`` contain path to a environment
file to load. Rules within the environment file are the same as within the ``setenv``
(same replacement and comment support).
.. conf:: passenv ^ SPACE-SEPARATED-GLOBNAMES
.. versionadded:: 2.0
A list of wildcard environment variable names which
shall be copied from the tox invocation environment to the test
environment when executing test commands. If a specified environment
variable doesn't exist in the tox invocation environment it is ignored.
You can use ``*`` and ``?`` to match multiple environment variables with
one name. The list of environment variable names is not case sensitive, and
all variables that match when upper cased will be passed. For example, passing
``A`` will pass both ``A`` and ``a``.
Some variables are always passed through to ensure the basic functionality
of standard library functions or tooling like pip.
This is also not case sensitive on all platforms except Windows:
* passed through on all platforms: ``CURL_CA_BUNDLE``, ``PATH``,
``LANG``, ``LANGUAGE``,
``LD_LIBRARY_PATH``, ``PIP_INDEX_URL``, ``PIP_EXTRA_INDEX_URL``,
``REQUESTS_CA_BUNDLE``, ``SSL_CERT_FILE``,
``HTTP_PROXY``, ``HTTPS_PROXY``, ``NO_PROXY``
* Windows: ``APPDATA``, ``SYSTEMDRIVE``, ``SYSTEMROOT``, ``PATHEXT``, ``TEMP``, ``TMP``
``NUMBER_OF_PROCESSORS``, ``USERPROFILE``, ``MSYSTEM``,
``PROGRAMFILES``, ``PROGRAMFILES(X86)``, ``PROGRAMDATA``
* Others (e.g. UNIX, macOS): ``TMPDIR``
You can override these variables with the ``setenv`` option.
If defined the ``TOX_TESTENV_PASSENV`` environment variable (in the tox
invocation environment) can define additional space-separated variable
names that are to be passed down to the test command environment.
.. versionchanged:: 2.7
``PYTHONPATH`` will be passed down if explicitly defined. If
``PYTHONPATH`` exists in the host environment but is **not** declared
in ``passenv`` a warning will be emitted.
.. conf:: recreate ^ true|false ^ false
Always recreate virtual environment if this option is true.
If this option is false, ``tox``'s resolution mechanism will be used to
determine whether to recreate the environment.
.. conf:: downloadcache ^ PATH
**IGNORED** -- Since pip-8 has caching by default this option is now
ignored. Please remove it from your configs as a future tox version might
bark on it.
.. conf:: sitepackages ^ true|false ^ false
Set to ``true`` if you want to create virtual environments that also
have access to globally installed packages.
.. warning::
In cases where a command line tool is also installed globally you have
to make sure that you use the tool installed in the virtualenv by using
``python -m <command line tool>`` (if supported by the tool) or
``{envbindir}/<command line tool>``.
If you forget to do that you will get a warning like this::
WARNING: test command found but not installed in testenv
cmd: /path/to/parent/interpreter/bin/<some command>
env: /foo/bar/.tox/python
Maybe you forgot to specify a dependency? See also the allowlist_externals envconfig setting.
.. conf:: alwayscopy ^ true|false ^ false
Set to ``true`` if you want virtualenv to always copy files rather than
symlinking.
This is useful for situations where hardlinks don't work (e.g. running in
VMS with Windows guests).
.. conf:: download ^ true|false ^ false
.. versionadded:: 3.10
Set to ``true`` if you want virtualenv to upgrade pip/wheel/setuptools to
the latest version. If (and only if) you want to choose a specific version
(not necessarily the latest) then you can add e.g. ``VIRTUALENV_PIP=20.3.3``
to your setenv.
.. conf:: args_are_paths ^ true|false ^ true
Treat positional arguments passed to ``tox`` as file system paths
and - if they exist on the filesystem - rewrite them according
to the ``changedir``. Default is true due to the exists-on-filesystem check it's
usually safe to try rewriting.
.. conf:: envtmpdir ^ PATH ^ {envdir}/tmp
Defines a temporary directory for the virtualenv which will be cleared
each time before the group of test commands is invoked.
.. conf:: envlogdir ^ PATH ^ {envdir}/log
Defines a directory for logging where tox will put logs of tool
invocation.
.. conf:: indexserver ^ URL
.. versionadded:: 0.9
(DEPRECATED, will be removed in a future version) Use :conf:`setenv`
to configure PIP_INDEX_URL environment variable, see below.
Multi-line ``name = URL`` definitions of python package servers.
You can specify an alternative index server for dependencies by applying the
``:indexservername:depname`` pattern. The ``default`` indexserver
definition determines where unscoped dependencies and the sdist install
installs from. Example:
.. code-block:: ini
[tox]
indexserver =
default = https://mypypi.org
will make tox install all dependencies from this PyPI index server
(including when installing the project sdist package).
The recommended way to set a custom index server URL is to use :conf:`setenv`:
.. code-block:: ini
[testenv]
setenv =
PIP_INDEX_URL = {env:PIP_INDEX_URL:https://pypi.org/simple/}
This will ensure the desired index server gets used for virtual environment
creation and allow overriding the index server URL with an environment variable.
.. conf:: envdir ^ PATH ^ {toxworkdir}/{envname}
.. versionadded:: 1.5
User can set specific path for environment. If path would not be absolute
it would be treated as relative to ``{toxinidir}``.
.. conf:: usedevelop ^ true|false ^ false
.. versionadded:: 1.6
Install the current package in development mode with "setup.py
develop" instead of installing from the ``sdist`` package. (This
uses pip's ``-e`` option, so should be avoided if you've specified a
custom :conf:`install_command` that does not support ``-e``). Note that
changes to the build/install process (including changes in dependencies)
are only detected when using setuptools with setup.py.
.. conf:: skip_install ^ true|false ^ false
.. versionadded:: 1.9
Do not install the current package. This can be used when you need the
virtualenv management but do not want to install the current package
into that environment.
.. conf:: ignore_outcome ^ true|false ^ false
.. versionadded:: 2.2
If set to true a failing result of this testenv will not make tox fail,
only a warning will be produced.
.. conf:: extras ^ MULTI-LINE-LIST
.. versionadded:: 2.4
A list of "extras" to be installed with the sdist or develop install.
For example, ``extras = testing`` is equivalent to ``[testing]`` in a
``pip install`` command. These are not installed if ``skip_install`` is
``true``.
.. conf:: description ^ SINGLE-LINE-TEXT ^ no description
A short description of the environment, this will be used to explain
the environment to the user upon listing environments for the command
line with any level of verbosity higher than zero.
.. conf:: parallel_show_output ^ bool ^ false
.. versionadded:: 3.7.0
If set to True the content of the output will always be shown when running in parallel mode.
.. conf:: depends ^ comma separated values
.. versionadded:: 3.7.0
tox environments this depends on. tox will try to run all dependent environments before running this
environment. Format is same as :conf:`envlist` (allows factor usage).
.. warning::
``depends`` does not pull in dependencies into the run target, for example if you select ``py27,py36,coverage``
via the ``-e`` tox will only run those three (even if ``coverage`` may specify as ``depends`` other targets too -
such as ``py27, py35, py36, py37``).
.. conf:: suicide_timeout ^ float ^ 0.0
.. versionadded:: 3.15.2
When an interrupt is sent via Ctrl+C or the tox process is killed with a SIGTERM,
a SIGINT is sent to all foreground processes. The :conf:`suicide_timeout` gives
the running process time to cleanup and exit before receiving (in some cases, a duplicate) SIGINT from
tox.
.. conf:: interrupt_timeout ^ float ^ 0.3
.. versionadded:: 3.15.0
When tox is interrupted, it propagates the signal to the child process
after :conf:`suicide_timeout` seconds. If the process still hasn't exited
after :conf:`interrupt_timeout` seconds, its sends a SIGTERM.
.. conf:: terminate_timeout ^ float ^ 0.2
.. versionadded:: 3.15.0
When tox is interrupted, after waiting :conf:`interrupt_timeout` seconds,
it propagates the signal to the child process, waits
:conf:`interrupt_timeout` seconds, sends it a SIGTERM, waits
:conf:`terminate_timeout` seconds, and sends it a SIGKILL if it hasn't
exited.
Any key=value setting in an ini-file can make use
of value substitution through the {...} string-substitution pattern.
You can escape curly braces with the \ character if you need them, for example:
commands = echo "\{posargs\}" = {posargs}
Note some substitutions (e.g. posargs, env) may have addition values attached to it,
via the : character (e.g. posargs - default value, env - key).
Such substitutions cannot have a space after the : character
(e.g. {posargs: magic} while being at the start of a line
inside the ini configuration (this would be parsed as factorial {posargs,
having value magic).
{toxinidir}- the directory where
tox.iniis located
{toxworkdir}- the directory where virtual environments are created and sub directories for packaging reside.
{temp_dir}the directory where tox temporary files live.
.. versionadded:: 3.16.1
{homedir}- the user-home directory path.
{distdir}- the directory where sdist-packages will be created in
{distshare}- (DEPRECATED) the directory where sdist-packages will be copied to so that they may be accessed by other processes or tox runs.
{:}- OS-specific path separator (
:on *nix family,;on Windows). May be used insetenv, when target variable is path variable (e.g. PATH or PYTHONPATH). {/}- OS-specific directory separator (
/on *nix family,\\on Windows). Useful for deriving filenames from preset paths, as arguments for commands that requires\\on Windows. e.g.{distdir}{/}file.txt. It is not usually needed when using commands written in Python.
{envname}- the name of the virtual environment
{envpython}- path to the virtual Python interpreter
{envdir}- directory of the virtualenv hierarchy
{envbindir}- directory where executables are located
{envsitepackagesdir}- directory where packages are installed. Note that architecture-specific files may appear in a different directory.
{envtmpdir}- the environment temporary directory
{envlogdir}- the environment log directory
If you specify a substitution string like this:
{env:KEY}
then the value will be retrieved as os.environ['KEY']
and raise an Error if the environment variable
does not exist.
If you specify a substitution string like this:
{env:KEY:DEFAULTVALUE}
then the value will be retrieved as os.environ['KEY']
and replace with DEFAULTVALUE if the environment variable does not
exist.
If you specify a substitution string like this:
{env:KEY:}
then the value will be retrieved as os.environ['KEY']
and replace with an empty string if the environment variable does not
exist.
Substitutions can also be nested. In that case they are expanded starting from the innermost expression:
{env:KEY:{env:DEFAULT_OF_KEY}}
the above example is roughly equivalent to
os.environ.get('KEY', os.environ['DEFAULT_OF_KEY'])
.. versionadded:: 3.4.0
It's possible to inject a config value only when tox is running in interactive shell (standard input):
{tty:ON_VALUE:OFF_VALUE}
The first value is the value to inject when the interactive terminal is available,
the second value is the value to use when it's not. The later on is optional. A good use case
for this is e.g. passing in the --pdb flag for pytest.
.. versionadded:: 1.0
If you specify a substitution string like this:
{posargs:DEFAULTS}
then the value will be replaced with positional arguments as provided to the tox command:
tox arg1 arg2
In this instance, the positional argument portion will be replaced with
arg1 arg2. If no positional arguments were specified, the value of
DEFAULTS will be used instead. If DEFAULTS contains other substitution
strings, such as {env:*}, they will be interpreted.,
Use a double -- if you also want to pass options to an underlying
test command, for example:
tox -- --opt1 ARG1
will make the --opt1 ARG1 appear in all test commands where [] or
{posargs} was specified. By default (see args_are_paths
setting), tox rewrites each positional argument if it is a relative
path and exists on the filesystem to become a path relative to the
changedir setting.
Previous versions of tox supported the [.*] pattern to denote
positional arguments with defaults. This format has been deprecated.
Use {posargs:DEFAULTS} to specify those.
.. versionadded:: 1.4
Values from other sections can be referred to via:
{[sectionname]valuename}
which you can use to avoid repetition of config values. You can put default values in one section and reference them in others to avoid repeating the same values:
[base]
deps =
pytest
mock
pytest-xdist
[testenv:dulwich]
deps =
dulwich
{[base]deps}
[testenv:mercurial]
deps =
mercurial
{[base]deps}.. versionadded:: 1.8
Suppose you want to test your package against python2.7, python3.6 and against
several versions of a dependency, say Django 1.5 and Django 1.6. You can
accomplish that by writing down 2*2 = 4 [testenv:*] sections and then
listing all of them in envlist.
However, a better approach looks like this:
[tox]
envlist = {py27,py36}-django{15,16}
[testenv]
deps =
pytest
django15: Django>=1.5,<1.6
django16: Django>=1.6,<1.7
py36: unittest2
commands = pytestThis uses two new facilities of tox-1.8:
- generative envlist declarations where each envname consists of environment parts or "factors"
- "factor" specific settings
Let's go through this step by step.
envlist = {py36,py27}-django{15,16}
This is bash-style syntax and will create 2*2=4 environment names
like this:
py27-django15 py27-django16 py36-django15 py36-django16
You can still list environments explicitly along with generated ones:
envlist = {py27,py36}-django{15,16}, docs, flake
Keep in mind that whitespace characters (except newline) within {}
are stripped, so the following line defines the same environment names:
envlist = {py27,py36}-django{ 15, 16 }, docs, flake
Note
To help with understanding how the variants will produce section values, you can ask tox to show their expansion with a new option:
$ tox -l py27-django15 py27-django16 py36-django15 py36-django16 docs flake
.. versionadded:: 3.15
Using similar syntax, it is possible to generate sections:
[testenv:py{27,36}-flake]
This is equivalent to defining distinct sections:
$ tox -a py27-flake py36-flake
It is useful when you need an environment different from the default one, but still want to take advantage of factor-conditional settings.
As discussed previously, parts of an environment name delimited by hyphens are
called factors and can be used to set values conditionally. In list settings
such as deps or commands you can freely intermix optional lines with
unconditional ones:
[testenv]
deps =
pytest
django15: Django>=1.5,<1.6
django16: Django>=1.6,<1.7
py36: unittest2Reading it line by line:
pytestwill be included unconditionally,Django>=1.5,<1.6will be included for environments containingdjango15factor,Django>=1.6,<1.7similarly depends ondjango16factor,unittest2will be loaded for Python 3.6 environments.
tox provides a number of default factors corresponding to Python interpreter
versions. The conditional setting above will lead to either python3.6 or
python2.7 used as base python, e.g. python3.6 is selected if current
environment contains py36 factor.
Note
Configuring :conf:`basepython` for environments using default factors will result in a warning. Configure :conf:`ignore_basepython_conflict` if you wish to explicitly ignore these conflicts, allowing you to define a global :conf:`basepython` for all environments except those with default factors.
Sometimes you need to specify the same line for several factors or create a special case for a combination of factors. Here is how you do it:
[tox]
envlist = py{27,34,36}-django{15,16}-{sqlite,mysql}
[testenv]
deps =
py34-mysql: PyMySQL # use if both py34 and mysql are in the env name
py27,py36: urllib3 # use if either py36 or py27 are in the env name
py{27,36}-sqlite: mock # mocking sqlite in python 2.x & 3.6
!py34-sqlite: mock # mocking sqlite, except in python 3.4
sqlite-!py34: mock # (same as the line above)
!py34-!py36: enum34 # use if neither py34 nor py36 are in the env nameTake a look at the first deps line. It shows how you can special case
something for a combination of factors, by just hyphenating the combining
factors together. This particular line states that PyMySQL will be loaded
for python 3.4, mysql environments, e.g. py34-django15-mysql and
py34-django16-mysql.
The second line shows how you use the same setting for several factors - by
listing them delimited by commas. It's possible to list not only simple factors,
but also their combinations like py27-sqlite,py36-sqlite.
The remaining lines all have the same effect and use conditions equivalent to
py27-sqlite,py36-sqlite. They have all been added only to help demonstrate
the following:
- how factor expressions get expanded the same way as in envlist
- how to use negated factor conditions by prefixing negated factors with
! - that the order in which factors are hyphenated together does not matter
Note
Factors don't do substring matching against env name, instead every
hyphenated expression is split by - and if ALL of its non-negated
factors and NONE of its negated ones are also factors of an env then that
condition is considered to hold for that env.
For example, environment py36-mysql-!dev:
- would be matched by expressions
py36,py36-mysqlormysql-py36, - but not
py2,py36-sqlorpy36-mysql-dev.
It is possible to mix both values substitution and factor expressions. For example:
[tox]
envlist = py27,py36,coverage
[testenv]
deps =
flake8
coverage: coverage
[testenv:py27]
deps =
{[testenv]deps}
pytest
With the previous configuration, it will install:
flake8andpytestpackages forpy27environment.flake8package forpy36environment.flake8andcoveragepackages forcoverageenvironment.
For systems supporting executable text files (scripts with a shebang), the
system will attempt to parse the interpreter directive to determine the program
to execute on the target text file. When tox prepares a virtual environment
in a file container which has a large length (e.g. using Jenkins Pipelines), the
system might not be able to invoke shebang scripts which define interpreters
beyond system limits (e.g. Linux has a limit of 128; BINPRM_BUF_SIZE). To
workaround an environment which suffers from an interpreter directive limit, a
user can bypass the system's interpreter parser by defining the
TOX_LIMITED_SHEBANG environment variable before invoking tox:
export TOX_LIMITED_SHEBANG=1
When the workaround is enabled, all tox-invoked text file executables will have
their interpreter directive parsed by and explicitly executed by tox.
tox will treat the following environment variables:
TOX_DISCOVERfor python discovery first try the python executables under these pathsTOXENVsee :conf:`envlist`.TOX_LIMITED_SHEBANGsee :ref:`long interpreter directives`.TOX_PARALLEL_NO_SPINNERsee :ref:`parallel_mode`._TOX_PARALLEL_ENVlets tox know that it is invoked in the parallel mode.TOX_PROVISIONis only intended to be used internally.TOX_REPORTER_TIMESTAMPenables showing for each output line its delta since the tox startup when set to1.TOX_SKIP_ENVsee :conf:`envlist`.TOX_TESTENV_PASSENVsee :conf:`passenv`.
tox will inject the following environment variables that you can use to test that your command is running within tox:
.. versionadded:: 3.4
TOX_WORK_DIRenv var is set to the tox work directoryTOX_ENV_NAMEis set to the current running tox environment nameTOX_ENV_DIRis set to the current tox environments working dir.TOX_PACKAGEthe packaging phases outcome path (useful to inspect and make assertion of the built package itself).TOX_PARALLEL_ENVis set to the current running tox environment name, only when running in parallel mode.
| note: | this applies for all tox envs (isolated packaging too) and all external commands called (e.g. install command - pip). |
|---|
pathspecifications: if a specifiedpathis a relative path it will be considered as relative to thetoxinidir, the directory where the configuration file resides.
.. autoprogram:: tox.cli:cli :prog: tox