Skip to content

INSTALL_TELEMETRY.md

Latest commit

 

History

History
15 lines (9 loc) · 811 Bytes

INSTALL_TELEMETRY.md

File metadata and controls

15 lines (9 loc) · 811 Bytes

Installing Telemetry

  1. Ensure that all required pre-requisites and input parameters are entered for telemetry.

  2. Once control_plane.yml and omnia.yml are executed, run the following commands from omnia/telemetry:

ansible-playbook telemetry.yml

Note: Telemetry Collection is only initiated on iDRACs on AWX that have a datacenter license and are running a firmware version of 4 or higher.

Adding a New Node to Telemetry

After initiation, new nodes can be added to telemetry by running the following commands from omnia/telemetry:

ansible-playbook add_idrac_node.yml

Note: Omnia creates a log file which is available at: /var/log/omnia_telemetry.log.