Merge commit '0b7d69d06ff58e01adace95bc08c69322c815639' into 2.0.x

* commit '0b7d69d06ff58e01adace95bc08c69322c815639': (40 commits)
  [cron] Bump distribution date (2020-09-15)
  Only set up SPI pins as needed (MarlinFirmware#19372)
  More strict STATIC_ITEM_N (MarlinFirmware#19378)
  Add missing FTDI EVE menu source (MarlinFirmware#19382)
  Allow E3 V2 DWIN without EEPROM, POWER_LOSS_RECOVERY
  M115 strings
  Always show Compiled:
  Better choice of code
  Improve temperature runaway, idle timeout (MarlinFirmware#19339)
  [cron] Bump distribution date (2020-09-14)
  heater_ind_t => heater_id_t
  Allow SWD debug on Robin Nano (MarlinFirmware#19345)
  Touch UI "Leveling" menu, misc. fixes (MarlinFirmware#19349)
  Fix extra string substitution bug (MarlinFirmware#19351)
  Read from backup TMC StealthChop state (MarlinFirmware#19364)
  Fix EXP2 pin define for MKS SGEN_L (MarlinFirmware#19369)
  Update Italian language (MarlinFirmware#19365)
  Highlight Creality DWIN menu icons (MarlinFirmware#19368)
  [cron] Bump distribution date (2020-09-13)
  M872 wait for probe temperature (MarlinFirmware#19344)
  ...

Author: davidveg

Marlin/Makefile

@@ -170,110 +170,114 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
 else ifeq ($(HARDWARE_MOTHERBOARD),1101)
 # Velleman K8400 Controller (derived from 3Drag Controller)
 else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (derived from 3Drag Controller)
+# Velleman K8600 Controller (Vertex Nano)
 else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# 2PrintBeta BAM&DICE with STK drivers
+# Velleman K8800 Controller (Vertex Delta)
 else ifeq ($(HARDWARE_MOTHERBOARD),1104)
-# 2PrintBeta BAM&DICE Due with STK drivers
+# 2PrintBeta BAM&DICE with STK drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1105)
-# MKS BASE v1.0
+# 2PrintBeta BAM&DICE Due with STK drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1106)
-# MKS v1.4 with A4982 stepper drivers
+# MKS BASE v1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.5 with Allegro A4982 stepper drivers
+# MKS v1.4 with A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS v1.6 with Allegro A4982 stepper drivers
+# MKS v1.5 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
+# MKS v1.6 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# MKS GEN v1.3 or 1.4
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# MKS GEN L
+# MKS GEN v1.3 or 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# zrib V2.0 control board (Chinese knock off RAMPS replica)
+# MKS GEN L
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# BigTreeTech or BIQU KFB2.0
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
   MCU ?= atmega1280
 
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Raise3D Rumba
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Rapide Lite RL200 Rumba
+# Raise3D Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Formbot T-Rex 2 Plus
+# Rapide Lite RL200 Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# TriGorilla Anycubic version 1.3 based on RAMPS EFB
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.4 Rev 1.1
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# Creality: Ender-4, CR-8
+# TriGorilla Anycubic version 1.4 Rev 1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# FYSETC F6 1.3
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# FYSETC F6 1.5
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# Duplicator i3 Plus
+# FYSETC F6 1.5
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# VORON
+# Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# TRONXY V3 1.0
+# VORON
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# Z-Bolt X Series
+# TRONXY V3 1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# TT OSCAR
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# Overlord/Overlord Pro
+# TT OSCAR
 else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# ADIMLab Gantry v1
+# Overlord/Overlord Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# ADIMLab Gantry v2
+# ADIMLab Gantry v1
 else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# BIQU Tango V1
+# ADIMLab Gantry v2
 else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# MKS GEN L V2
+# BIQU Tango V1
 else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# Copymaster 3D
+# MKS GEN L V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# Ortur 4
+# MKS GEN L V2.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Tenlog D3 Hero
+# Copymaster 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1153)
+# Ortur 4
+else ifeq ($(HARDWARE_MOTHERBOARD),1154)
+# Tenlog D3 Hero
+else ifeq ($(HARDWARE_MOTHERBOARD),1155)
 
 #
 # RAMBo and derivatives