diff --git a/boards/nucleo-f031k6/doc.md b/boards/nucleo-f031k6/doc.md new file mode 100644 index 000000000000..343953e38968 --- /dev/null +++ b/boards/nucleo-f031k6/doc.md @@ -0,0 +1,48 @@ +@defgroup boards_nucleo-f031k6 STM32 Nucleo-F031K6 +@ingroup boards_common_nucleo32 +@brief Support for the STM32 Nucleo-F031K6 + +## Overview + +The Nucleo-F031K6 is a board from ST's Nucleo family supporting ARM Cortex-M0 +STM32F031K6 microcontroller with 4KiB of RAM and 32KiB of Flash. + +## Pinout + +@image html pinouts/nucleo-f031k6-and-more.svg "Pinout for the Nucleo-F031K6 (from ST User Manual, UM1956, https://www.st.com/resource/en/user_manual/um1956-stm32-nucleo32-boards-mb1180-stmicroelectronics.pdf, page 31)" width=25% + +### MCU + +| MCU | STM32F031K6 | +|:---------- |:------------------- | +| Family | ARM Cortex-M0 | +| Vendor | ST Microelectronics | +| RAM | 4KiB | +| Flash | 32KiB | +| Frequency | up to 48MHz | +| FPU | no | +| Timers | 8 (5x 16-bit, 1x 32, 1x Systick, 1x Watchdog) | +| ADC | 1x 12-bit (13 channels) | +| UARTs | 1 (one USART) | +| SPIs | 1 | +| CANs | 0 | +| RTC | 1 | +| I2Cs | 1 | +| Vcc | 2.0V - 3.6V | +| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f031k6.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/rm0091-stm32f0x1stm32f0x2stm32f0x8-advanced-armbased-32bit-mcus-stmicroelectronics.pdf) | +| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/pm0215-stm32f0-series-cortexm0-programming-manual-stmicroelectronics.pdf) | +| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/um1956-stm32-nucleo32-boards-mb1180-stmicroelectronics.pdf) | + +## Flashing the Board Using ST-LINK Removable Media + +On-board ST-LINK programmer provides via composite USB device removable media. +Copying the HEX file causes reprogramming of the board. This task +could be performed manually; however, the cpy2remed (copy to removable +media) PROGRAMMER script does this automatically. To program board in +this manner, use the command: +``` +make BOARD=nucleo-f031k6 PROGRAMMER=cpy2remed flash +``` +@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates + can be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html). diff --git a/boards/nucleo-f031k6/doc.txt b/boards/nucleo-f031k6/doc.txt deleted file mode 100644 index 4674e14b42ca..000000000000 --- a/boards/nucleo-f031k6/doc.txt +++ /dev/null @@ -1,24 +0,0 @@ -/** - * @defgroup boards_nucleo-f031k6 STM32 Nucleo-F031K6 - * @ingroup boards_common_nucleo32 - * @brief Support for the STM32 Nucleo-F031K6 - -## Overview - -The Nucleo-F031K6 is a board from ST's Nucleo family supporting ARM Cortex-M0 -STM32F031K6 microcontroller with 4KiB of RAM and 64KiB of Flash. - -## Flashing the Board Using ST-LINK Removable Media - -On-board ST-LINK programmer provides via composite USB device removable media. -Copying the HEX file causes reprogramming of the board. This task -could be performed manually; however, the cpy2remed (copy to removable -media) PROGRAMMER script does this automatically. To program board in -this manner, use the command: -``` -make BOARD=nucleo-f031k6 PROGRAMMER=cpy2remed flash -``` -@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates - can be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html). - - */ diff --git a/doc/doxygen/src/pinouts/nucleo-f031k6-and-more.svg b/doc/doxygen/src/pinouts/nucleo-f031k6-and-more.svg new file mode 100644 index 000000000000..20b03cb8c079 --- /dev/null +++ b/doc/doxygen/src/pinouts/nucleo-f031k6-and-more.svg @@ -0,0 +1,1135 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +