🎨 Misc. SPI cleanup

Author: thinkyhead

Marlin/src/HAL/DUE/inc/SanityCheck.h

@@ -68,16 +68,15 @@
  * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
  * as the TMC2130 soft SPI the most common setup.
  */
-#define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
-
 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
-  #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
-      #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
-    #endif
-  #elif ENABLED(DUE_SOFTWARE_SPI)
+  #define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
+  #if DISABLED(DUE_SOFTWARE_SPI) && ENABLED(TMC_USE_SW_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+    #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
+  #endif
+  #if ENABLED(DUE_SOFTWARE_SPI) && DISABLED(TMC_USE_SW_SPI)
     #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
   #endif
+  #undef _IS_HW_SPI
 #endif
 
 #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY

Marlin/src/HAL/DUE/spi_pins.h

@@ -24,7 +24,7 @@
 /**
  * Define SPI Pins: SCK, MISO, MOSI, SS
  *
- * Available chip select pins for HW SPI are 4 10 52 77
+ * Available chip select pins for HW SPI are 4 10 52 77 87
  */
 #if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
   #if SDSS == 4

Marlin/src/HAL/LINUX/spi_pins.h

@@ -31,12 +31,6 @@
                         // spiBeginTransaction.
 #endif
 
-// Onboard SD
-//#define SD_SCK_PIN     P0_07
-//#define SD_MISO_PIN    P0_08
-//#define SD_MOSI_PIN    P0_09
-//#define SD_SS_PIN      P0_06
-
 // External SD
 #ifndef SD_SCK_PIN
   #define SD_SCK_PIN        50

Marlin/src/HAL/LPC1768/spi_pins.h

@@ -30,12 +30,13 @@
                         // spiBeginTransaction.
 #endif
 
-/** onboard SD card */
-//#define SD_SCK_PIN        P0_07
-//#define SD_MISO_PIN       P0_08
-//#define SD_MOSI_PIN       P0_09
-//#define SD_SS_PIN         P0_06
-/** external */
+// Onboard SD
+//#define SD_SCK_PIN     P0_07
+//#define SD_MISO_PIN    P0_08
+//#define SD_MOSI_PIN    P0_09
+//#define SD_SS_PIN      P0_06
+
+// External SD
 #ifndef SD_SCK_PIN
   #define SD_SCK_PIN        P0_15
 #endif

Marlin/src/sd/Sd2Card.h

@@ -78,7 +78,7 @@ uint8_t const SD_CARD_TYPE_SD1  = 1,        // Standard capacity V1 SD card
 /**
  * Define SOFTWARE_SPI to use bit-bang SPI
  */
-#if ANY(MEGA_SOFT_SPI, USE_SOFTWARE_SPI)
+#if ANY(MEGA_SOFT_SPI, SDFAT_USE_SOFTWARE_SPI)
   #define SOFTWARE_SPI
 #endif
 

Marlin/src/sd/SdFatConfig.h

@@ -88,8 +88,8 @@
  */
 #define MEGA_SOFT_SPI 0
 
-// Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
-#define USE_SOFTWARE_SPI 0
+// Set SDFAT_USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
+#define SDFAT_USE_SOFTWARE_SPI 0
 
 /**
  * The __cxa_pure_virtual function is an error handler that is invoked when

Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h

@@ -33,7 +33,7 @@
   /**
    * Define SOFTWARE_SPI to use bit-bang SPI
    */
-  #if ANY(MEGA_SOFT_SPI, USE_SOFTWARE_SPI)
+  #if ANY(MEGA_SOFT_SPI, SDFAT_USE_SOFTWARE_SPI)
     #define SOFTWARE_SPI
   #endif