🩹 Bail on 'mc.zip' write error (#25695)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

Author: GMagician

Marlin/src/gcode/eeprom/M500-M504.cpp

@@ -73,7 +73,7 @@ void GcodeSuite::M502() {
           bool success = true;
           for (uint16_t i = 0; success && i < sizeof(mc_zip); ++i) {
             const uint8_t c = pgm_read_byte(&mc_zip[i]);
-            file.write(c);
+            success = (file.write(c) == 1);
           }
           success = file.close() && success;
 

Marlin/src/sd/SdBaseFile.cpp

@@ -2168,7 +2168,7 @@ bool SdBaseFile::truncate(uint32_t length) {
  * include write() is called before a file has been opened, write is called
  * for a read-only file, device is full, a corrupt file system or an I/O error.
  */
-int16_t SdBaseFile::write(const void *buf, uint16_t nbyte) {
+int16_t SdBaseFile::write(const void *buf, const uint16_t nbyte) {
   #if ENABLED(SDCARD_READONLY)
     writeError = true; return -1;
   #endif

Marlin/src/sd/SdBaseFile.h

@@ -345,7 +345,7 @@ class SdBaseFile {
    * \return SdVolume that contains this file.
    */
   SdVolume* volume() const { return vol_; }
-  int16_t write(const void *buf, uint16_t nbyte);
+  int16_t write(const void *buf, const uint16_t nbyte);
 
  private:
   friend class SdFat;           // allow SdFat to set cwd_

Marlin/src/sd/SdFile.cpp

@@ -67,11 +67,7 @@ int16_t SdFile::write(const void * const buf, const uint16_t nbyte) { return SdB
  * \param[in] b the byte to be written.
  * Use writeError to check for errors.
  */
-#if ARDUINO >= 100
-  size_t SdFile::write(const uint8_t b) { return SdBaseFile::write(&b, 1); }
-#else
-  void SdFile::write(const uint8_t b) { SdBaseFile::write(&b, 1); }
-#endif
+size_t SdFile::write(const uint8_t b) { return SdBaseFile::write(&b, 1); }
 
 /**
  * Write a string to a file. Used by the Arduino Print class.

Marlin/src/sd/SdFile.h

@@ -42,12 +42,7 @@ class SdFile : public SdBaseFile {
  public:
   SdFile() {}
   SdFile(const char * const name, const uint8_t oflag);
-  #if ARDUINO >= 100
-    size_t write(const uint8_t b);
-  #else
-    void write(const uint8_t b);
-  #endif
-
+  size_t write(const uint8_t b);
   int16_t write(const void * const buf, const uint16_t nbyte);
   void write(const char * const str);
   void write_P(PGM_P str);

buildroot/tests/STM32F103RE_creality

@@ -19,7 +19,7 @@ opt_enable DWIN_CREALITY_LCD_JYERSUI AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
 exec_test $1 $2 "Ender-3 v2 with JyersUI" "$3"
 
 use_example_configs "Creality/Ender-3 S1/STM32F1"
-opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CONFIGURATION_EMBEDDING CANCEL_OBJECTS FWRETRACT
+opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CANCEL_OBJECTS FWRETRACT
 opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT STATUS_MESSAGE_SCROLLING \
            SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \
            BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \