🎨 HAS_SPI_FLASH => SPI_FLASH

Author: thinkyhead

Marlin/src/gcode/control/M993_M994.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ALL(HAS_SPI_FLASH, SDSUPPORT, MARLIN_DEV_MODE)
+#if ALL(SPI_FLASH, SDSUPPORT, MARLIN_DEV_MODE)
 
 #include "../gcode.h"
 #include "../../sd/cardreader.h"
@@ -85,4 +85,4 @@ void GcodeSuite::M994() {
   card.closefile();
 }
 
-#endif // HAS_SPI_FLASH && SDSUPPORT && MARLIN_DEV_MODE
+#endif // SPI_FLASH && SDSUPPORT && MARLIN_DEV_MODE

Marlin/src/gcode/gcode.cpp

@@ -1053,7 +1053,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 422: M422(); break;                                  // M422: Set Z Stepper automatic alignment position using probe
       #endif
 
-      #if ALL(HAS_SPI_FLASH, SDSUPPORT, MARLIN_DEV_MODE)
+      #if ALL(SPI_FLASH, SDSUPPORT, MARLIN_DEV_MODE)
         case 993: M993(); break;                                  // M993: Backup SPI Flash to SD
         case 994: M994(); break;                                  // M994: Load a Backup from SD to SPI Flash
       #endif

Marlin/src/gcode/gcode.h

@@ -1194,7 +1194,7 @@ class GcodeSuite {
     static void M995();
   #endif
 
-  #if BOTH(HAS_SPI_FLASH, SDSUPPORT)
+  #if BOTH(SPI_FLASH, SDSUPPORT)
     static void M993();
     static void M994();
   #endif

Marlin/src/lcd/extui/mks_ui/SPIFlashStorage.cpp

@@ -27,8 +27,8 @@
 #include "../../../inc/MarlinConfig.h"
 #include "SPIFlashStorage.h"
 
-#if !HAS_SPI_FLASH
-  #error "HAS_SPI_FLASH is required with TFT_LVGL_UI."
+#if DISABLED(SPI_FLASH)
+  #error "SPI_FLASH is required with TFT_LVGL_UI."
 #endif
 
 extern W25QXXFlash W25QXX;

Marlin/src/libs/W25Qxx.cpp

@@ -22,7 +22,7 @@
 
 #include "../inc/MarlinConfig.h"
 
-#if HAS_SPI_FLASH
+#if ENABLED(SPI_FLASH)
 
 #include "W25Qxx.h"
 
@@ -380,4 +380,4 @@ void W25QXXFlash::SPI_FLASH_BufferRead(uint8_t *pBuffer, uint32_t ReadAddr, uint
   SPI_FLASH_CS_H();
 }
 
-#endif // HAS_SPI_FLASH
+#endif // SPI_FLASH

Marlin/src/pins/linux/pins_RAMPS_LINUX.h

@@ -396,8 +396,8 @@
 
   #define SD_DETECT_PIN                       41
 
-  #define HAS_SPI_FLASH                        1
-  #if HAS_SPI_FLASH
+  #define SPI_FLASH
+  #if ENABLED(SPI_FLASH)
     #define SPI_DEVICE                         1
     #define SPI_FLASH_SIZE             0x1000000  // 16MB
     #define SPI_FLASH_CS_PIN                  31

Marlin/src/pins/stm32f1/pins_CHITU3D_common.h

@@ -114,8 +114,8 @@
 #endif
 
 // SPI Flash
-#define HAS_SPI_FLASH                          1
-#if HAS_SPI_FLASH
+#define SPI_FLASH
+#if ENABLED(SPI_FLASH)
   #define SPI_FLASH_SIZE                0x200000  // 2MB
 #endif
 

Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h

@@ -68,8 +68,8 @@
 #define SPI_DEVICE                             2
 
 // SPI Flash
-#define HAS_SPI_FLASH                          1
-#if HAS_SPI_FLASH
+#define SPI_FLASH
+#if ENABLED(SPI_FLASH)
   // SPI 2
   #define SPI_FLASH_CS_PIN                  PB12  // SPI2_NSS / Flash chip-select
   #define SPI_FLASH_MOSI_PIN                PB15

Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h

@@ -183,7 +183,7 @@
 //
 #if NO_EEPROM_SELECTED
   //#define SPI_EEPROM
-  //#define HAS_SPI_FLASH                      1  // need MARLIN_DEV_MODE for M993/M994 eeprom backup tests
+  //#define SPI_FLASH                             // need MARLIN_DEV_MODE for M993/M994 EEPROM backup tests
   #define FLASH_EEPROM_EMULATION
 #endif
 
@@ -196,7 +196,7 @@
   #define EEPROM_MOSI_PIN    BOARD_SPI1_MOSI_PIN  // PA7 pin 32
   #define EEPROM_PAGE_SIZE               0x1000U  // 4K (from datasheet)
   #define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE)   // Limit to 64K for now...
-#elif HAS_SPI_FLASH
+#elif ENABLED(SPI_FLASH)
   #define SPI_FLASH_SIZE                0x40000U  // limit to 256K (M993 will reboot with 512)
   #define SPI_FLASH_CS_PIN                  PC5
   #define SPI_FLASH_MOSI_PIN                PA7

Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h

@@ -272,8 +272,8 @@
 //
 // W25Q64 64Mb (8MB) SPI flash
 //
-#define HAS_SPI_FLASH                          1
-#if HAS_SPI_FLASH
+#define SPI_FLASH
+#if ENABLED(SPI_FLASH)
   #define SPI_FLASH_SIZE                0x800000  // 8MB
   #define SPI_FLASH_CS_PIN                  PG9
   #define SPI_FLASH_MOSI_PIN                PB15