Skip to content

Commit fc3ee8d

Browse files
thinkyheadthinkyhead
committed
Update Print Job Timer comments
MarlinFirmware/Marlin#22046
1 parent 21d2ff2 commit fc3ee8d

File tree

270 files changed

+3780
-1350
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

270 files changed

+3780
-1350
lines changed

‎config/default/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1824,11 +1824,20 @@
18241824
/**
18251825
* Print Job Timer
18261826
*
1827-
* Automatically start and stop the print job timer on M104/M109/M190.
1828-
*
1829-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1830-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1831-
* M190 (bed, wait) - high temp = start timer, low temp = none
1827+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1828+
* The print job timer will only be stopped if the bed/chamber target temp is
1829+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1830+
*
1831+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1832+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1833+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1834+
* M190 (bed, wait) - high temp = start timer, low temp = none
1835+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1836+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1837+
*
1838+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1839+
* For M140/M190, high temp is anything over BED_MINTEMP.
1840+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18321841
*
18331842
* The timer can also be controlled with the following commands:
18341843
*

‎config/examples/3DFabXYZ/Migbot/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1856,11 +1856,20 @@
18561856
/**
18571857
* Print Job Timer
18581858
*
1859-
* Automatically start and stop the print job timer on M104/M109/M190.
1860-
*
1861-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1862-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1863-
* M190 (bed, wait) - high temp = start timer, low temp = none
1859+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1860+
* The print job timer will only be stopped if the bed/chamber target temp is
1861+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1862+
*
1863+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1864+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1865+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1866+
* M190 (bed, wait) - high temp = start timer, low temp = none
1867+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1868+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1869+
*
1870+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1871+
* For M140/M190, high temp is anything over BED_MINTEMP.
1872+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18641873
*
18651874
* The timer can also be controlled with the following commands:
18661875
*

‎config/examples/ADIMLab/Gantry v1/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1825,11 +1825,20 @@
18251825
/**
18261826
* Print Job Timer
18271827
*
1828-
* Automatically start and stop the print job timer on M104/M109/M190.
1829-
*
1830-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1831-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1832-
* M190 (bed, wait) - high temp = start timer, low temp = none
1828+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1829+
* The print job timer will only be stopped if the bed/chamber target temp is
1830+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1831+
*
1832+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1833+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1834+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1835+
* M190 (bed, wait) - high temp = start timer, low temp = none
1836+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1837+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1838+
*
1839+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1840+
* For M140/M190, high temp is anything over BED_MINTEMP.
1841+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18331842
*
18341843
* The timer can also be controlled with the following commands:
18351844
*

‎config/examples/ADIMLab/Gantry v2/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1825,11 +1825,20 @@
18251825
/**
18261826
* Print Job Timer
18271827
*
1828-
* Automatically start and stop the print job timer on M104/M109/M190.
1829-
*
1830-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1831-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1832-
* M190 (bed, wait) - high temp = start timer, low temp = none
1828+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1829+
* The print job timer will only be stopped if the bed/chamber target temp is
1830+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1831+
*
1832+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1833+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1834+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1835+
* M190 (bed, wait) - high temp = start timer, low temp = none
1836+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1837+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1838+
*
1839+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1840+
* For M140/M190, high temp is anything over BED_MINTEMP.
1841+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18331842
*
18341843
* The timer can also be controlled with the following commands:
18351844
*

‎config/examples/AlephObjects/TAZ4/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1835,11 +1835,20 @@
18351835
/**
18361836
* Print Job Timer
18371837
*
1838-
* Automatically start and stop the print job timer on M104/M109/M190.
1839-
*
1840-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1841-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1842-
* M190 (bed, wait) - high temp = start timer, low temp = none
1838+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1839+
* The print job timer will only be stopped if the bed/chamber target temp is
1840+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1841+
*
1842+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1843+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1844+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1845+
* M190 (bed, wait) - high temp = start timer, low temp = none
1846+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1847+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1848+
*
1849+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1850+
* For M140/M190, high temp is anything over BED_MINTEMP.
1851+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18431852
*
18441853
* The timer can also be controlled with the following commands:
18451854
*

‎config/examples/Alfawise/U20-bltouch/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1894,11 +1894,20 @@
18941894
/**
18951895
* Print Job Timer
18961896
*
1897-
* Automatically start and stop the print job timer on M104/M109/M190.
1898-
*
1899-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1900-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1901-
* M190 (bed, wait) - high temp = start timer, low temp = none
1897+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1898+
* The print job timer will only be stopped if the bed/chamber target temp is
1899+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1900+
*
1901+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1902+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1903+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1904+
* M190 (bed, wait) - high temp = start timer, low temp = none
1905+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1906+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1907+
*
1908+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1909+
* For M140/M190, high temp is anything over BED_MINTEMP.
1910+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
19021911
*
19031912
* The timer can also be controlled with the following commands:
19041913
*

‎config/examples/Alfawise/U20/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1896,11 +1896,20 @@
18961896
/**
18971897
* Print Job Timer
18981898
*
1899-
* Automatically start and stop the print job timer on M104/M109/M190.
1900-
*
1901-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1902-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1903-
* M190 (bed, wait) - high temp = start timer, low temp = none
1899+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1900+
* The print job timer will only be stopped if the bed/chamber target temp is
1901+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1902+
*
1903+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1904+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1905+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1906+
* M190 (bed, wait) - high temp = start timer, low temp = none
1907+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1908+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1909+
*
1910+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1911+
* For M140/M190, high temp is anything over BED_MINTEMP.
1912+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
19041913
*
19051914
* The timer can also be controlled with the following commands:
19061915
*

‎config/examples/AliExpress/CL-260/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1824,11 +1824,20 @@
18241824
/**
18251825
* Print Job Timer
18261826
*
1827-
* Automatically start and stop the print job timer on M104/M109/M190.
1828-
*
1829-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1830-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1831-
* M190 (bed, wait) - high temp = start timer, low temp = none
1827+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1828+
* The print job timer will only be stopped if the bed/chamber target temp is
1829+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1830+
*
1831+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1832+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1833+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1834+
* M190 (bed, wait) - high temp = start timer, low temp = none
1835+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1836+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1837+
*
1838+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1839+
* For M140/M190, high temp is anything over BED_MINTEMP.
1840+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18321841
*
18331842
* The timer can also be controlled with the following commands:
18341843
*

‎config/examples/AliExpress/UM2pExt/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1825,11 +1825,20 @@
18251825
/**
18261826
* Print Job Timer
18271827
*
1828-
* Automatically start and stop the print job timer on M104/M109/M190.
1829-
*
1830-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1831-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1832-
* M190 (bed, wait) - high temp = start timer, low temp = none
1828+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1829+
* The print job timer will only be stopped if the bed/chamber target temp is
1830+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1831+
*
1832+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1833+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1834+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1835+
* M190 (bed, wait) - high temp = start timer, low temp = none
1836+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1837+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1838+
*
1839+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1840+
* For M140/M190, high temp is anything over BED_MINTEMP.
1841+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18331842
*
18341843
* The timer can also be controlled with the following commands:
18351844
*

‎config/examples/Anet/A2/Configuration.h‎

Lines changed: 14 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -1824,11 +1824,20 @@
18241824
/**
18251825
* Print Job Timer
18261826
*
1827-
* Automatically start and stop the print job timer on M104/M109/M190.
1828-
*
1829-
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1830-
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1831-
* M190 (bed, wait) - high temp = start timer, low temp = none
1827+
* Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
1828+
* The print job timer will only be stopped if the bed/chamber target temp is
1829+
* below BED_MINTEMP/CHAMBER_MINTEMP.
1830+
*
1831+
* M104 (hotend, no wait) - high temp = none, low temp = stop timer
1832+
* M109 (hotend, wait) - high temp = start timer, low temp = stop timer
1833+
* M140 (bed, no wait) - high temp = none, low temp = stop timer
1834+
* M190 (bed, wait) - high temp = start timer, low temp = none
1835+
* M141 (chamber, no wait) - high temp = none, low temp = stop timer
1836+
* M191 (chamber, wait) - high temp = start timer, low temp = none
1837+
*
1838+
* For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
1839+
* For M140/M190, high temp is anything over BED_MINTEMP.
1840+
* For M141/M191, high temp is anything over CHAMBER_MINTEMP.
18321841
*
18331842
* The timer can also be controlled with the following commands:
18341843
*

0 commit comments

Comments
 (0)