2.8.0

[Koenkk]

Feel free to discuss the 2.8.0 release here!

[GigiPompieru]

Two of my TRVZBs no longer show the correct FW installed:

In the device page the Firmware version is Unknown. Interviewing the device does not fix the issue. I have also restarted Z2M, the same.

To fix it I ran check for updates on the two devices.

L. E.: the same for all of my Tuya TS011F_plug_1

[Passific]

I have a similar issue since a long time (more than a year) with device SIN-4-RS-20: every time Z2M restarts there is some inconsistency between FW found and FW available. I just check for update on them and problem gone.

[Nerivec]

@GigiPompieru This is expected. We cleared all cached OTA information with 2.8.0 due to the big changes around OTA (to prevent conflicts / stale states). Devices will eventually re-populate this information on their own time, or, you can trigger a manual check. This information is not retrieved during interview, only during OTA checks (initiated either by device or by user).

[max-t-d]

EDIT: SOLVED.
ye gods I'm a dumbass - the thing is just named VOC particles in the HA UI... disregard original comment please - I'll leave the original below in case someone else hasn't had enough coffee like me... Monday mornings, man!

This may be something very obvious... but I run a bunch of Bosch Twinguard that got their co2 measurement corrected to "eco2". Now the sensor in my home assistant MQTT device is simply missing. the data is there and it is listed as an expose in z2m, but the sensor doesn't seem to be added to the MQTT device on HA side. is there any way to trigger a new auto-discovery / auto-config for that MQTT device in order to get the sensor added to the device?