|
| 1 | +/* |
| 2 | + * LP55XX Platform Data Header |
| 3 | + * |
| 4 | + * Copyright (C) 2012 Texas Instruments |
| 5 | + * |
| 6 | + * Author: Milo(Woogyom) Kim <[email protected]> |
| 7 | + * |
| 8 | + * This program is free software; you can redistribute it and/or |
| 9 | + * modify it under the terms of the GNU General Public License |
| 10 | + * version 2 as published by the Free Software Foundation. |
| 11 | + * |
| 12 | + * Derived from leds-lp5521.h, leds-lp5523.h |
| 13 | + */ |
| 14 | + |
| 15 | +#ifndef _LEDS_LP55XX_H |
| 16 | +#define _LEDS_LP55XX_H |
| 17 | + |
| 18 | +/* Clock configuration */ |
| 19 | +#define LP55XX_CLOCK_AUTO 0 |
| 20 | +#define LP55XX_CLOCK_INT 1 |
| 21 | +#define LP55XX_CLOCK_EXT 2 |
| 22 | + |
| 23 | +/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */ |
| 24 | +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ |
| 25 | +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ |
| 26 | +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ |
| 27 | +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ |
| 28 | +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ |
| 29 | +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ |
| 30 | +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ |
| 31 | +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ |
| 32 | +#define LP5521_CLK_INT 1 /* Internal clock */ |
| 33 | +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ |
| 34 | + |
| 35 | +struct lp55xx_led_config { |
| 36 | + const char *name; |
| 37 | + u8 chan_nr; |
| 38 | + u8 led_current; /* mA x10, 0 if led is not connected */ |
| 39 | + u8 max_current; |
| 40 | +}; |
| 41 | + |
| 42 | +struct lp55xx_predef_pattern { |
| 43 | + u8 *r; |
| 44 | + u8 *g; |
| 45 | + u8 *b; |
| 46 | + u8 size_r; |
| 47 | + u8 size_g; |
| 48 | + u8 size_b; |
| 49 | +}; |
| 50 | + |
| 51 | +/* |
| 52 | + * struct lp55xx_platform_data |
| 53 | + * @led_config : Configurable led class device |
| 54 | + * @num_channels : Number of LED channels |
| 55 | + * @label : Used for naming LEDs |
| 56 | + * @clock_mode : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT |
| 57 | + * @setup_resources : Platform specific function before enabling the chip |
| 58 | + * @release_resources : Platform specific function after disabling the chip |
| 59 | + * @enable : EN pin control by platform side |
| 60 | + * @patterns : Predefined pattern data for RGB channels |
| 61 | + * @num_patterns : Number of patterns |
| 62 | + * @update_config : Value of CONFIG register |
| 63 | + */ |
| 64 | +struct lp55xx_platform_data { |
| 65 | + |
| 66 | + /* LED channel configuration */ |
| 67 | + struct lp55xx_led_config *led_config; |
| 68 | + u8 num_channels; |
| 69 | + const char *label; |
| 70 | + |
| 71 | + /* Clock configuration */ |
| 72 | + u8 clock_mode; |
| 73 | + |
| 74 | + /* Platform specific functions */ |
| 75 | + int (*setup_resources)(void); |
| 76 | + void (*release_resources)(void); |
| 77 | + void (*enable)(bool state); |
| 78 | + |
| 79 | + /* Predefined pattern data */ |
| 80 | + struct lp55xx_predef_pattern *patterns; |
| 81 | + unsigned int num_patterns; |
| 82 | + |
| 83 | + /* _CONFIG register */ |
| 84 | + u8 update_config; |
| 85 | +}; |
| 86 | + |
| 87 | +#endif /* _LEDS_LP55XX_H */ |
0 commit comments