PCI: Fix Intel i210 by avoiding overlapping of BARs

The Intel i210 doesn't work if the Expansion ROM BAR overlaps with
another BAR. Networking won't work at all and once a packet is sent the
netdev watchdog will bite:

[   89.059374] ------------[ cut here ]------------
[   89.064019] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out
[   89.070681] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x3a8/0x3b0
[   89.078989] Modules linked in:
[   89.082053] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W         5.11.0-rc1-00020-gc16f033804b torvalds#289
[   89.091574] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
[   89.099870] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[   89.105900] pc : dev_watchdog+0x3a8/0x3b0
[   89.109923] lr : dev_watchdog+0x3a8/0x3b0
[   89.113945] sp : ffff80001000bd50
[   89.117268] x29: ffff80001000bd50 x28: 0000000000000008
[   89.122602] x27: 0000000000000004 x26: 0000000000000140
[   89.127935] x25: ffff002001c6c000 x24: ffff002001c2b940
[   89.133267] x23: ffff8000118c7000 x22: ffff002001c6c39c
[   89.138600] x21: ffff002001c6bfb8 x20: ffff002001c6c3b8
[   89.143932] x19: 0000000000000000 x18: 0000000000000010
[   89.149264] x17: 0000000000000000 x16: 0000000000000000
[   89.154596] x15: ffffffffffffffff x14: 0720072007200720
[   89.159928] x13: 0720072007740775 x12: ffff80001195b980
[   89.165260] x11: 0000000000000003 x10: ffff800011943940
[   89.170592] x9 : ffff800010100d44 x8 : 0000000000017fe8
[   89.175924] x7 : c0000000ffffefff x6 : 0000000000000001
[   89.181255] x5 : 0000000000000000 x4 : 0000000000000000
[   89.186587] x3 : 00000000ffffffff x2 : ffff8000118eb908
[   89.191919] x1 : 84d8200845006900 x0 : 0000000000000000
[   89.197251] Call trace:
[   89.199701]  dev_watchdog+0x3a8/0x3b0
[   89.203374]  call_timer_fn+0x38/0x208
[   89.207049]  run_timer_softirq+0x290/0x540
[   89.211158]  __do_softirq+0x138/0x404
[   89.214831]  irq_exit+0xe8/0xf8
[   89.217981]  __handle_domain_irq+0x70/0xc8
[   89.222091]  gic_handle_irq+0xc8/0x2b0
[   89.225850]  el1_irq+0xb8/0x180
[   89.228999]  arch_cpu_idle+0x18/0x40
[   89.232587]  default_idle_call+0x70/0x214
[   89.236610]  do_idle+0x21c/0x290
[   89.239848]  cpu_startup_entry+0x2c/0x70
[   89.243783]  secondary_start_kernel+0x1a0/0x1f0
[   89.248332] ---[ end trace 1687af62576397bc ]---
[   89.253350] igb 0002:01:00.0 enP2p1s0: Reset adapter

Before this fixup the Expansion ROM BAR will overlap with BAR3:
  # lspci -ns 2:1:0 -xx
  0002:01:00.0 0200: 8086:1533 (rev 03)
  00: 86 80 33 15 06 04 10 00 03 00 00 02 08 00 00 00
  10: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 20 40
  20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 03 00
  30: 00 00 20 40 40 00 00 00 00 00 00 00 22 01 00 00

Add a quirk which will update the Expansion ROM BAR for Intel i210s even
if the ROM is disabled. After the quirk is applied:
  # lspci -ns 2:1:0 -xx
  0002:01:00.0 0200: 8086:1533 (rev 03)
  00: 86 80 33 15 06 04 10 00 03 00 00 02 08 00 00 00
  10: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 20 40
  20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 03 00
  30: 00 00 10 40 40 00 00 00 00 00 00 00 22 01 00 00

This behavior was seen with U-Boot v2021.01-rc3 on an ARM64 board (kontron
sl28). Earlier versions likely behave in the same way, but the board which
this was tested on, is only supported since the 2021.01 version.

Signed-off-by: Michael Walle <[email protected]>

Author: mwalle

drivers/pci/quirks.c

@@ -5612,3 +5612,39 @@ static void apex_pci_fixup_class(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
 			       PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
+
+/*
+ * Some devices don't work if the Expansion ROM has the same base address as
+ * one of the other BARs although it is disabled.
+ * This might happen if the bootloader/BIOS enumerates the BARs in a different
+ * way than linux. If the Expansion ROM is disabled, linux deliberately skips
+ * writing the ROM BAR if the BAR is not enabled because of some broken
+ * devices, see pci_std_update_resource(). Thus, the ROM BAR of the device will
+ * still contain the value assigned by the booloader, which might be the same
+ * value as one of the other BARs then.
+ *
+ * As a workaround, update the Expansion ROM BAR even if the Expansion ROM is
+ * disabled.
+ */
+static void pci_fixup_write_rom_bar(struct pci_dev *dev)
+{
+	struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
+	struct pci_bus_region region;
+	u32 rom_addr;
+
+	pci_read_config_dword(dev, dev->rom_base_reg, &rom_addr);
+
+	if (rom_addr & PCI_ROM_ADDRESS_ENABLE)
+		return;
+
+	pci_info(dev, "Writing Expansion ROM BAR to avoid overlapping\n");
+
+	pcibios_resource_to_bus(dev->bus, &region, res);
+	rom_addr &= ~PCI_ROM_ADDRESS_MASK;
+	rom_addr |= region.start;
+	pci_write_config_dword(dev, dev->rom_base_reg, rom_addr);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1533, pci_fixup_write_rom_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1536, pci_fixup_write_rom_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1537, pci_fixup_write_rom_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1538, pci_fixup_write_rom_bar);